When your camera says the card is luck and you can not captured. Open your camera and get the memory card, look at the memory card you can see there a small push button you need to slide that to unlock the memory card. Insert the back back to camera and try to take a picture if it can captured.
On some cards the slide breaks off - use sticky tape and wrap it around the slotv where the slide is - or should be - that should stop the sensor inside the camera from thinking the slide is in the locked oposition
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
Your advice did the trick. Thanks, I was not aware of the slide on the side of the card.
" - ivanklein
i have a dxg 506 video and snapshot camera when i put in 8meg card it locks out camera and i can not...
(More)
i have a dxg 506 video and snapshot camera when i put in 8meg card it locks out camera and i can not use it
HEJ Jag har Köpt EN DXG-305V CMIRA MEN TYVäR TANDA FIK BKUKSANVISNING INTE MED...
(More)
HEJ Jag har Köpt EN DXG-305V CMIRA MEN TYVäR TANDA FIK BKUKSANVISNING INTE MED DET, JAG VET INTE HUR DEN NFUNGERAR, Tacksam för hjälp, SONYA
My DXG 503 camera stopped working. When I go to take a picture it says card locked. Which it wasn't....
(More)
My DXG 503 camera stopped working. When I go to take a picture it says card locked. Which it wasn't. I even bought a new disk for it just in case something went wrong with the disk and even with the new disk it says its locked. Any help with the stinkin' thing??