Question about Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

1 Answer

Dishwasher starts randoming blinking ER message

Same issue. Lights flash. cannot get the top wash (that runs for 99 minutes or such) to even work anymore...when it does run it is the normal clean for 46 minutes. I h ve tried unplugging to reset to no avail. Have had the dishwasher all of 7 months as it came with a new house so it SHOULD be under warranty (I cannot find any of the info where I registered it though :( )

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 725 Answers

Call an factory Authorized service company in your area.. New house your move in date will be the DOP... and its cover for a year.. .ER error is a touchpad error... check your dishwasher install it must have an 1 inch of space at the top... I know it will not looks as good but this dishwasher MUST have an inch between the top and the counter...let me know if it helps

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My viking vdb325ss dishwasher runs for a few minutes and then stops with control pad lights blinking. The "normal cycle" and "pots and pans" lights blink together. I have reset and restarted the dis


Hello Peter!

Your owners manual or a call to Viking should help you decode the blinking panel lights. They are not random and are a desperate cry for help from the machine.

It has been my experience (YMMV) that a common dishwasher problem in older machines is accumulated grunge (the technical term) in the water level sensor. In many cases the sensor lives in a plastic container on the side of the DW and although the designers try hard to avoid contamination, the container eventually loads up and intermittently jams the float.

Before I pulled the unit however, I'd check the bottom of the wash cabinet for contaminants. There may be an screen (under a cover plate) that has clogged.

Your situation sounds a bit different, since my Samsung did not pump out water, it just stopped and flashed a code, but who knows? Go for the low-hanging, common issues first.

All the best.

Nov 23, 2014 | Viking VDB325SS Dishwasher

1 Answer

Kenmore washer error codes


Appliance Repair Forums

Near top of page click on Thread "HE Error Codes"

Even blonde can do it Quick fix repair for Kenmore He2 front loading...

Search youtube for he2 washer for other help videos

Aug 18, 2014 | Kenmore HE2 Washing Machines

1 Answer

Eidw6105gb1 dishwasher lights blinking took toe plate off the wash pump light is on but the unit washes great cound that control be sensing a but wash pump even if the pump is working?


Good Afternoon John,

I see that your Electrolux dishwasher, model# EIDW6105GB1, has all the lights blinking and is revealing the wash pump light. This could just be a false error and would need to be cleared or it could mean that the wash pump is going bad. You can try resetting the appliance, by cutting the power at the circuit breaker for 20-30 minutes. When power is returned, start a cycle. If the lights are still flashing and revealing the wash pump light, I suggest either contacting the manufacturer or maybe a local authorized dealer. Hope this helps.

-Best of luck-
WP

Mar 26, 2014 | Electrolux 24 in. EDW5500DSS Stainless...

1 Answer

4yr old Frigidaire, green flashing ER light and red flashing washing/drying and red flashing clean/S. model# PLD 4555RFC3. Also green flashing china/crystal and red flashing rinse/low, start/delay doesn't...


Good Afternoon Sandra, thank you for your question!

Let's try resetting the dishwasher by either unplugging it or flipping the household circuit breaker to the off position. It is important to wait roughly ten minutes and then turn dishwasher back on. Confirm that the door is properly latched and try selecting a cycle. If resetting the power does not correct the issue, it could potentially mean a number of things: a potential wiring failure, damaged cord, faulty door latch assembly or control board. Because it could be a number of any one of several underlying causes, I would recommend contacting a professional to properly diagnose and repair the appliance.

Sep 21, 2013 | Frigidaire 24 in. FDB1050REC Stainless...

2 Answers

I have a Frigidaire model#PLD4555RFCO the er code and the washing and drying and clean and S lights are on and blinking on the display. have any ideas what the problem is?


Hi

"Er Clean S" is a common error with Frigidaire which means shorted keypad. The issue is with the touchpad/keypad that should be replaced. However, before replacing the keypad you can unplug it and take it apart completely and use a hair dryer to blow some warm air on the keypad assembly to blow the moisture off. Hope this helps...please post back for further assistance.

Daniel

Aug 27, 2011 | Frigidaire Professional Series 24 in....

1 Answer

My "clean" light flashes even


Hi
If clean light is blinking 7 times then it may be an issue with heater circuit, door switch or wash pump. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting the same error. If yes, then it is a water heating fault. To resolve this error try pressing this reset sequence-- Heat Dry - Normal - Heat Dry - Normal or High Temp - Air Dry - High Temp - Air Dry or Hi Temp Scrub, energy saver dry, Hi Temp Scrub, energy saver dry. Now let the unit run for 2-3 minutes and then you press the Cancel/Drain button and allow it to completely drain and reset.
If this doesn't work then it's an issue with the wash pump not pumping the water past the heater efficiently or due to lack of water to heat. Please make sure that heater is not open circuited and is heating the water efficiently. You'll have to check the heater using a multimeter; the meter should read between 3000 to 3300 ohms (Use multimeter on Rx1 ohm setting). If heater is fine then make sure water pressure is optimum and fill valve is working fine. Hope this helps... Please post back for further assistance.

Jan 30, 2011 | KitchenAid 24 in. KUDI01ILBS Stainless...

1 Answer

MDB6160AWW - flashing lights after hitting the normal cycle: Clean and Heated Dry buttons flash. What is this code telling me? Keith


Hi

These blinking lights indicates an issue with heater circuit, door switch or wash pump. Please reset the power to the dishwasher and after, 5 minutes check if you are still getting the same error. If yes, then it is a water heating fault. To resolve this error try pressing this reset sequence-- Heat Dry - Normal - Heat Dry - Normal or High Temp - Air Dry - High Temp - Air Dry or Hi Temp Scrub, energy saver dry, Hi Temp Scrub, energy saver dry. Now let the unit run for 2-3 minutes and then you press the Cancel/Drain button and allow it to completely drain and reset. If this doesn't work then it's an issue with the wash pump not pumping the water past the heater efficiently or due to lack of water to heat. Please make sure that heater is not open circuited and is heating the water efficiently. You'll have to check the heater using a multimeter; the meter should read between 3000 to 3300 ohms (Use multimeter on Rx1 ohm setting). If heater is fine then make sure water pressure is optimum and fill valve is working fine. Hope this helps... Please post back for further assistance.

Daniel

Jan 18, 2011 | Maytag 24 in. MDB6100A Built-in Dishwasher

1 Answer

I have a GE QuietPower3 dishwasher... the normal wash, heated dry, hot wash and hot start buttons are all flashing... can you tell me what is going on please?


try this, I was researching and found that this solution worked. While all the lights are blinking, close the dishwasher door and let the machine run through the cycles. This actually happens pretty fast. Then it will stop and quiet down and all the blinking lights will shut off. Then just press the buttons you want and hit start and the machine will start. The time it takes for the blinking light to shut off is about 1 to 2 minutes. It worked for me.

Aug 09, 2009 | GE Dishwashers

2 Answers

My clean light is flashing....call service to check heater?


f the clean light flashes 7 times, pauses, then repeats...

When the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light flashes 7 times, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water. Check the element for damage (burnt/shorted).

To clear the flashing light you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cycle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

If the issue returns, you could have a problem with the heating circuit (ie. element, thermostat or wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it).

Mar 05, 2009 | Kenmore 24 in. 16032 Built-in Dishwasher

Not finding what you are looking for?
Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Brad Brown

Level 3 Expert

15557 Answers

Robert Roath
Robert Roath

Level 1 Expert

35 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...