Question about 321studios DVD X Copy Express (200083) for PC

1 Answer

WILL NOT LOAD IN WINDOWS VISTA

DVD EXPRESS WILL NOT LOAD IN WINDOWS VISTA . DVD EXPRESS CAN NOT FIND DRIVERS, THEN A MESSAGE COULD NOT LOCATE PATIN-COUFLIN ENGINE?????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 403 Answers

This is the requirements for DVD Express. There are a lot of programs that are not compatible with Vista.



Minimum Requirements

  • Windows XP, 2000, 98, ME
  • Pentium II 450 MHz processor
  • 64 MB of RAM
  • Hard Drive free space of 10GB
  • DVD Burner (DVD-R, DVD+R, DVD-RW, or DVD+RW)
  • Blank DVD Media (DVD-R, DVD+R, DVD-RW, or DVD+R
http://www.dvdcloningsoftware.com/dvdxpress.htm

You might consider to partition your hard-drive so you can run XP on it too and be able to run programs like this one. Hope this helps, sorry for you luck. Let me know if I can help you with anything else.
JimmyC

Posted on Oct 04, 2009

Testimonial: "Thank you...Nothing is ever simple."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WINDOWS VISTA 64 bit not reading CD Rom/ DVD player after services pack download. Driver is best. Error message "problen in registry (code 19)


If it truly needs a driver then install patin-couffin It will bypass all that windows uses now and accurately talk between drives and the dvd-rom. But it sounds to me that your dvd-rom just failed. You never know when they are going to go

Apr 17, 2013 | Microsoft Windows 7 Home Premium Operating...

1 Answer

Intel DQ965GF Motherboard won't load WIN OS (WINXPPro volume disk or Win7) tho an old Dell disk did load. Is there a fix? Thz


Hello here is the homepage:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+965+Express+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DQ965GF

Windows 7 is not a supported system, but you can use the drivers from the vista system, but only the 32 bit.

Turn on or restart your computer and watch for a message during the post about a particular key, usually Del or F2, that you'll need to press to ...enter SETUP. Press this key as soon as you see the message.

After the post, BIOS will attempt to boot from the first device listed in the boot order.You need to change that, so the first boot device in the list is the dvd drive. If that device is not bootable, BIOS will attempt to boot from the second device listed, and so on.

Note: The boot order is a BIOS setting so it's OS independent. In other words, it doesn't matter if you have Windows 7, Windows Vista, Windows XP, Linux, or any other PC operating system on your hard drive or other bootable device, these boot sequence change instructions will still apply.

Here is how you do this:

http://www.hiren.info/pages/bios-boot-cdrom

But ofcourse there could be a problem with the dvd drive or harddrive.

To install windows 7, you will need at least 1 gb ram or more, and a dual core cpu.

Best of luck

Feb 12, 2013 | Computers & Internet

2 Answers

Code19 on sony cdrwdvd willnot reconize on inspiron 1525


Your CD drive or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or DVD. This issue might have occurred after you installed, uninstalled, or updated a program or Windows Vista.

This issue may have occurred after one of the following situations:
  • You upgrade a computer to Windows Vista or install Windows Vista Service Pack 1.
  • You install or uninstall CD or DVD recording programs.
  • You uninstall Microsoft Digital Image.
You may see one of the following error messages:
  • One of the following error messages appears when you view the CD drive or the DVD drive in Device Manager.

    Error message 1 The device is not working properly because Windows cannot load the drivers required for this device (Code 31). Error message 2 A driver for this device was not required, and has been disabled (Code 32 or Code 31). Error message 3 Your registry might be corrupted. (Code 19)
  • An "error code 39" error message.
  • A message that resembles the following appears in the notification area: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
  • you can find this information and more at this site..
  • http://support.microsoft.com/kb/314060

Nov 08, 2009 | Dell OptiPlex GX260 PC Desktop

1 Answer

Tsst corp cd/dvdw ts-652d ata device not found


your CD-ROM/DVD-ROMs require no drivers   install Nero and see if it works  if not  check the wiring  if it has IDE cables make sure the jumpers are correct for the situation  make sure they are 80 pin cables not 40 pin and that the poer is plugged into the drives  sometimes if Patin-couffin is installed it may fix things

Oct 20, 2009 | Gateway GT5435E Refurbished AMD Desktop...

1 Answer

Wot is a patin couffin engine


The "VSO Devices" category belongs to VSO Software, they make DVD "Back-Up" software and their Patin Couffin engine is widely used by other like-minded software houses.

Sep 02, 2009 | Foxconn (945G7MA-8KS2) Motherboard

1 Answer

How can i download the matshita dvd ram uj 8505?


Hi there.
If its Vista you are using, right click on "computer", select "manage" a window will pop up, select "device manager" you will now see a list of devices, look down the list and locate the CD/DVD Rom, click on the + icon next to the CD/DVD, right click on it and select "uninstall". restart the machine and load windows up as usual, the drivers for the CD/DVD will install automatically and you should be able to use the CD/DVD Rom.

Good luck and thanks for using Fixya!!!!

Mar 02, 2009 | Compaq Computers & Internet

1 Answer

What is patin coffin engine


patin couffin engine is the correct spelling....it is a device driver. It is used for burning DVD's.
also known as a software engine....its produced by a french company called VSO. Try this link....
www.vso-software.fr/products/burningsdk
there are a few issues with this engine, so download at your own risk....hope this helps, dont forget to rate me...thank you

Jan 29, 2009 | 321studios 321 Studios DVD X Copy (Backup,...

1 Answer

XFX 750I Motherboard w/ SLI Can not locate the SATA Driver ( Can not load WIN-Vista ) Help


You will get to a point in Vista set up where it asks you what drive/partition you want to install to. Obviously the window which should contain the drive information is empty because Vista can't see the hard drive yet. At the bottom of this windows there's a "Load Drivers" button. Make sure your XFX motherboard CD is in the dvd drive then click the Load Drivers button. Now you should be able to browse the CD. The SATA drivers will either be in a folder called RAID or a floder called SATA. Just click on the correct folder containing the drivers and click OK. Vista should now load the SATA drivers and your drive/s will appear in the window.

If this doesn't work then I suggest you register on XFX's website and go to the support section and download the driver from there:

http://www.xfxforce.com/en-gb/Help/Support.aspx

Dec 31, 2008 | Computers & Internet

1 Answer

DVD burn with DVD X-copy not completing finalizing mode


"Is this what is causing the "finalizing" to not complete the burn?" ... Almost certainly yes. You need to update/reinitialize your Patin Couffin engine device drivers(s).

Referer: http://www.free-codecs.com/download/Patin_Couffin_access_layer.htm
Download: http://www.freecodecs.net/fc/patin-couffin_37.zip
  1. Download the stand-alone installation package.
  2. After download is complete, close all other applications, then run it.
  3. Restart (reboot) your system.
  4. Test by re-performing the same procedure(s) which previously failed and generated the error dialog (pop-up).
"Today's the best day of my life...and NOW you're part of it!"

Dec 10, 2008 | 321studios DVD X Copy Platinum (200000)...

Not finding what you are looking for?
321studios DVD X Copy Express (200083) for PC Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top 321studios Computers & Internet Experts

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Darial Jr Lasaria
Darial Jr Lasaria

Level 3 Expert

378 Answers

Are you a 321studios Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...