Question about Envision L32W761 32 in. LCD TV

1 Answer

Screen Size on my Envision L32W761 TV is cutting off the picture.

I have an Envision L32W761 that cuts off some of the screen no matter what mode it is in...usually you can only tell when an address or phone number pops up during a commercial, but obviously we are missing some of the picture when we watch anything...how can I adjust this?? Thank you!!

Posted by on

  • joyousapprec Oct 04, 2009

    Thank you, electroman2...we have a button that when pressed gives you four different screen options: normal, wide, zoom and cinema. None of those options give us a full picture, meaning the top and bottom of what is being shown on tv is cut off a bit, less on the normal selection but still cut off none-the-less. Someone suggested we call our cable company as it may be a set-up issue between our cable box and our tv...hopefully that will help! Also we learned that many commercials are not shot in HD or set up for it, so they will often be cut off a bit and that is the way it is for all. We were using commercials to show people how it was cut off...so that solved that problem! :)

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Envision Master
  • 1,039 Answers

Look on the remote for a button labelled ASPECT,P SIZE, ZOOM or FORMAT. Press it until picture is desired size.

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've lost the remote control for my AOC Envision L32W761. How can I change the menu and input source options using the front panel controls? I'm able to access the menu screen but can't figure out how to...


Try navigating the screen using the volume and channel controls. If you still can't get to the left side of the screen then try press the menu button again while on the menu screen to see if it'll navigate you there.
Hope this helps :)

Apr 20, 2014 | Envision L32W761 32 in. LCD TV

1 Answer

Picture size


I found the user manual online, and the pictures in it are really helpful and make this make a lot more sense, but:
1. Press [SCREEN MODE], to switch the TV aspect ratio.
2. Press [SCREEN MODE] repeatedly until the normal screen displays.
NOTE: • Some programs may not offer all display mode options.
4:3 Programming
[Sidebar] Sidebar displays a 4:3 picture at its standard 4:3 size. Sidebars will be displayed on the right and left edges of the screen.
[Full] Full displays a 4:3 picture at a 16:9 size, with horizontal elongation necessary to fill the screen.
[Cinema] Cinema displays a 4:3 picture at a 16:9 size, with less horizontal elongation necessary to fill the screen because a little bit of the top and bottom edge of the screen will be cut off.
[Wide] Wide displays the center of the picture as original size and the outer sides of the picture will be elongated. The size of the picture will depend on the original signal.
16:9 Programming
[Full] A picture is displayed at 16:9 size as it is.
[Zoom] Zoom displays a 16:9 picture without changing its horizontal and vertical ratio, at its maximum size.
[Cinema] Cinema displays a 16:9 picture with vertical elongation.
[Expand] Expand displays a 16:9 picture with horizontal elongation

Source: LC320EM8 User Manual
http://www.manualslib.com/manual/47021/Emerson-Lc320em8.html?page=21#manual

May 15, 2013 | Emerson LC320EM8 32 in. LCD TV

1 Answer

Picture on 47


You do not worry at all, because the set is under warranty.

Launch a complaint and sit peas fully.

Jul 23, 2012 | RCA 47LA55RS 47 in. LCD TV

2 Answers

I have a 32" AOC Envision L32w761 LCD hdtv with no


There are only two things that can cause this problem -inverter and T-con. Since you have already replaced the inverter, it can be nothing other than the T-CON or LCD controller. Replacing the same should resolve the problem. On a side note the inverter/T-Con problem can be isolated easily. The purpose of the inverter is only to light up the backlight of the panel. So when it fails you will still have a faint picture that can be seen if you flash a flashlight on the screen. If you would like me to find you the replacement T-con let me know the part number and I will get you the link to the part.

Sep 07, 2011 | Envision L32W761 32 in. LCD TV

1 Answer

We just bought a new HD TV and the actual tv picture is not fitting the screen width wise.


you most likley have it on zoom. press menu go to zoom, and go to through until u find 'full'

Feb 28, 2010 | Envision L32W761 32 in. LCD TV

1 Answer

I too have the problem where the top and bottom of the picture is cut off on the TV screen. No formatting of any kind fixes it. What is the answer?


Some of the wide screen programs will leave blank strips top and bottom of the screen, you can fill the screen if your TV or the remote has picture size buttons where you can select "movie" mode or "movie zoom" modes. try stepping through picture size buttons. Some times it is marked as "wide" on your remote.

Jan 03, 2010 | Envision L32W761 32 in. LCD TV

1 Answer

I turned the TV on and have sound, but NO picture, no images


Envision LCDTV & PDP Warranty
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year after the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge

You can check with them here to see if they will repair your unit for free. May have to cut and paste link.
http://208.109.129.152/company.asp?EPage=company

Jun 09, 2009 | Envision L32W761 32 in. LCD TV

1 Answer

Can't get a connect from my emachine to aco l32w761


2 options:

1) Try changing your screen resolution to say 640x480 or 800x600 ..

2) Try it in safe mode also ..

Jan 21, 2009 | Envision L32W761 32 in. LCD TV

Not finding what you are looking for?
Envision L32W761 32 in. LCD TV Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Envision Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

bigdawg7299

Level 3 Expert

2559 Answers

Cindy Wells

Level 3 Expert

5160 Answers

Are you an Envision Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...