Question about Miller Electric Mfg Co 903505 Invision 456P MIG Welder , 3- Phase, 10 - 38 V Type: 230/460 60HZ

1 Answer

I have an old mastercraft 110 volt ac stick welder model 110-104 have not used it for years have lost the instruction manual plate on the machine says primary voltage is 115 and primary amperage is 26.6 The question is - do I run a 20 amp or a 30 amp circuit to bring power to the welder

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

35 amp should do nicely however make sure the mains cable is of the correct size, better still, get a qualified Electricion to install it.
Usualy 30amp could be used but using 35amp gives you some reserve

Posted on Oct 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Operating instructions thermadyne sa tig 200p ac/dc


Go to this site and you can download or print a manual for your welder copy and paste to google search engine and it has the manual on pdf. TRANSTIG 200 AC/DC Servic Manual - Victor Technologies

Oct 07, 2013 | ARC Thermadyne Inverter Stick/TIG Welder...

1 Answer

I have a Clarke MIG 130 EN welder, butI lost lthe Instruction manual& need a new one.


Hi and welcome to FixYa, I am Kelly

You can get your manual here: Manual PN 6014530
http://www.clarkeservice.co.uk/manuals/mig_welders/mig110e-160en.pdf
Manual is 290 kb Manual says it is 230VAC?

You may have to call them via this contact data to get a 110V manual:
Clark Power Products, Inc. 10752 N. 89th Place, Suite 104. Scottsdale, AZ 85260.
Phone: (480) 661-8599. Fax: (480) 614-0125
email: sales@clarkpowerproducts.com

Their 1-800 number stopped working in 2009 due to financial reasons.

Hopefully this will help you.
Thanks for choosing FixYa,
Kelly

Jul 14, 2011 | Clarke Power Products Clarke 130EN Mig 110...

1 Answer

I have a older lincoin ac225s welder I got this from a old man that said it worked . well it has no power cord on it and my question is is the ground wire connected to the point where the ground from the...


Hello, I was a little suspicious about the voltage on this unit. Forgive me if I am telling you something you already know on the power side of this welder. http://content.lincolnelectric.com/pdfs/products/literature/e230.pdf
The welder you have is a 230 volt single phase 60 hz. What you require is a 230 volt connection. The two line wires from the 230 are connected on either side of the switch. The ground has to be connected to the chassis / frame of the welder itself. I would not connect to the ground cable output, I would connect only to the metal chassis of the welder. This is to keep the welder isolated from the main power circuits in your shop.

Jan 28, 2011 | Lincoln Electric K1297 AC/DC 225/125 Stick...

1 Answer

Lincoln electric ac/dc arc welder model ac/dc


my welder doesn't weld but my electric meeter goes wild.

Jul 25, 2010 | Lincoln Electric K1297 AC/DC 225/125 Stick...

1 Answer

Need power input wiring diagram for 230V use


you can get the manual here:
http://www.millerwelds.com/service/locate_om.php

Jul 23, 2010 | Miller Electric Manufacturing Electric...

1 Answer

I have a Mastercraft AC-230 welder (58-8009-8) with helmits and accessories for sale. It is quite old and user has passed away. How much can I ask for this??


It is impossible to give a price without seeing the lot for sale, I will say that AC Oil cooled sets are a shop luxury and Manufactures of fertilizer would give you a good price, find a friend in the welding game, get his advice,

Jan 27, 2010 | Miller Electric Mfg Co 903505 Invision...

1 Answer

Inverter stick welder welding rod sputters and sticks


It sounds like the rod that you're using is too big. If it is a 110 volt machine, and you're using a 1/8 rod...Then the rod is too big. Try a 3/32 rod.

Jul 14, 2009 | Welding Tools

3 Answers

Have a 110 volt mig wire feed. motor slows to a


Hi,
To get parts for your welder you'll need to have the serial number off the tag on the case. This problem could have other causes, have you:
Checked the tension on the wire spool? You ought to be able to pull the wire by hand easily.
Checked the tension setting on the pinch rollers? Too much tension can drag down the motor speed.

You could also have a bad control card depending on which model wire feeder this is.

Regards,
Carl

Feb 28, 2009 | Hobart Welding Tools

2 Answers

Mastercraft Wet Sharpener; Model No 55-3504-4


I just purchased one of these machines - also without the manual (seems to be a recurring problem with Mastercraft).

I phoned Mastercraft's toll-free number (1-800-689-9928) and they apologized and said they'd mail me a manual.

Have the model # handy, and be prepared to stay on hold for awhile (took me almost 30min the 1st try, maybe 10min the 2nd).

Hope this helps.

Oct 21, 2008 | Kitchen Appliances - Others

Not finding what you are looking for?
Miller Electric Mfg Co 903505 Invision 456P MIG Welder , 3- Phase, 10 - 38 V Type: 230/460 60HZ Logo

652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miller Welding Tools Experts

Kory Ronning

Level 2 Expert

60 Answers

hubiam
hubiam

Level 1 Expert

15 Answers

John Trevino

Level 3 Expert

1383 Answers

Are you a Miller Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...