Question about Euro-Pro NV31 Infinity Vacuum

1 Answer

Infinity Vaccum by Shark, model number NV31COS, will not start. The vacuum was running just fine until it grabbed the edge of a curtain. Turned it off to release the suction. Turned it back on and was working fine. About a minute later the vacuum was making an odd noise. Every 2 seconds or so it would "heave" (lack of a better word) then go away, then come back and so on. Turned the vacuum off and checked for blockage, none that could be seen or felt, and now the vacuum won't turn. Any suggestions? Thank you in advance for your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Carpet brush won't turn when vac on

Posted on Nov 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my shark navigator cordless vacuum pick anything up?


Sometimes everything seems to be fine. The brushes turn, but if the brushes aren't cleaned of hair, rug tangles and so on, the brushes on the vaccum get filled and it won't puck up anything. ON THE OTHER HAND if the brushes are clean, did you check all your hoses from thr base of of vaccum where things get sucked up to the bin?

Jan 27, 2016 | Shark Vacuums

1 Answer

I want a hose part for a model NR92C shark infinity vacuum and also a manual or parts


William,
I hate to be the bearer of bad news, but getting parts for Shark vacuums is Very hard! I work at a vacuum repair shop and we cannot get even simple things like belts for Shark vacuums and we will work on anything that we can get parts for. Sorry!

Jun 30, 2015 | Shark Vacuums

1 Answer

My Shark Rocket won't turn back on.


Some models have a reset button on them if you have one push it all they way in and try that.

Feb 08, 2015 | Shark Rocket Self-Propelled Bagless...

1 Answer

Need new brush ( power beater bar) and belts


Hello,

You're in luck! We carry both the belts, as well as the roller brush for your Shark Infinity model that you listed this repair under.

Here are links to both parts you are requesting:
Euro-Pro Shark Infinity NV30, NV31 Bagless Upright Roller Brush Assembly

Belt Set For Shark Infinity Bagless Uprights, Models NV30, NV31

After you receive the parts, here's a link to the manual that will walk you through, step by step on how to replace both items if you have any questions, or need help:

Shark Infinity Bagless Upright Owners Manual


Hopefully this was able to answer your questions. Please feel free to reply to this email or just give me a call if you have any further questions. If this helped, please be so kind and rate the repair, or leave some feedback for me.

Chris Jones
GoVacuum.com

May 22, 2010 | Euro-Pro NV31 Infinity Vacuum

1 Answer

I need a new roller bar or beater brush for infinity vacuum


Hi There,

Here's a link to that part on our website if you haven't found it already:
Euro-Pro Shark Infinity NV30, NV31 Bagless Upright Roller Brush Assembly

Also if you need belts for this machine, here's another link to the belts on our website:
Euro-Pro Shark Replacement Belt Set For Shark Infinity Upright Models, Part 1085F

I hope that this information helped you. If it did, please be sure to rate the repair helpful by clicking the thumbs up icon in the top right hand corner of the repair.

Thanks again,

Chris J.
GoVacuum.com

Apr 14, 2010 | Euro-Pro NV31 Infinity Vacuum

1 Answer

Broken belt on infinity vacum


Hello,

You may find the belt for your vacuum through the link below. Unfortunately the only way that Shark sells this belt is with both belts as a set, you can not purchase each indiviudal belt separately.

I have also uploaded the instruction manual for your vacuum in a .pdf file on Fixya. Please note that it may take sometimes up to 24 hours for the manual to show up. Please check the following link over the next 24 hours. This instruction manual gives you step by step instructions on how to replace the belt, and also contains diagrams that will help you follow along.

Here's the link where the instruction manual will be downloaded. The belt change instructions are on page 15:
http://www.sharkclean.com/manual/NV31_REV_0706.pdf

Here's the set of belts that go on the Euro-Pro Infinity Upright model NV31, Shark Part Number 1085F:
http://www.govacuum.com/eushrebesetf.html

I hope this was helpful to you in solving your belt problems. If this was helpful please rate the repair helpful by clicking on the thumbs up icons in the top right hand corner of the repair.

Thank you very much,

Chris Jones
GoVacuum

Mar 25, 2010 | Euro-Pro NV31 Infinity Vacuum

3 Answers

Infinity Shark Vacuum


YOU HAVE BROKEN THE BELT, ORDER ONE FROM HERE

http://www.sharkvac.com/partsearch.aspx?CatID=cxmdqvOilfw%3d

Jan 11, 2009 | Euro-Pro NV31 Infinity Vacuum

Not finding what you are looking for?
Euro-Pro NV31 Infinity Vacuum Logo

1,504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you an Euro-Pro Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...