Question about GE JBP82 Electric Kitchen Range

1 Answer

No heat at burners or oven

Tried to use stove this morning - heat top worked for a minute or so and then stopped. We weren't immediately present when it went out, but came back to check food and noticed burner was warm.

Turned off burner and the clock turned off.
Oven dial does nothing.

Clock turns back on when burner is turned on (and maintains the same time as when it first stopped working).

Right now, I just turned the burner on, but no heat. Lights are functioning, but no heat at burner.

Where do I start?

Posted by on

  • 4 more comments 
  • malcore Dec 22, 2007

    Checked breaker box per your info.

    Power is still at the range, as the lights come on when the stove top is turned on...but as soon as stove is turned off, clock/display shuts off as well (where it would typically show the time).

  • malcore Dec 22, 2007

    Second attempt: when pulling the range away from wall, there was sparking near where the cord enters the housing. Unplugged and took panel off - red wire was totally fried.

    You had it right on: "...may even find the cord burnt in there..."


    - matt

  • jrbjcwhalen Jun 29, 2008

    Turned JBP80 on to preheat, came back a few minutes later and display was blank.  Oven was warm but no longer working (oven and burners).  Checked wiring and no apparent problem.  Can get clock to come on but when I turn a burner knob (light on but no heat) the clock goes out.

  • Anonymous Mar 06, 2009

    I have the exact same proublem it is weird that there hasn't been any r call. I have only had my stove a year and a half.

  • Anonymous Mar 16, 2014

    All burners and oven stopped working in the middle of dinner. no codes present

  • Anonymous Mar 20, 2014

    burners work display don't work so can turn on oven



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 262 Answers

Check your fuse / breaker box make sure you have power (sounds like you dropped a leg of power) make sure breakers/fuse is on/good flip it to off the to on if oven don't work then take a look at the cord to the range check power at the wall then open where cord goes into range check power or you may even find the cord burnt in there if so replace all damaged wires good luck

Posted on Dec 22, 2007

  • Bill Dozier Dec 23, 2007




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What's wrong and how do I fix it?

The circuit breaker outside in the power panel for the stove has a bad breaker. It will be two breakers with their handles joined together by a pin so if one tripe it takes the other so 220 V is no longer present. When one, but not the other trips you only have 110 V. That's why the lights and clock still work but no heating elements.

Nov 16, 2015 | Frigidaire Kitchen Ranges

4 Answers

GE Stove tope range not working

If the phenomenon is intermittent, and you get it going and coming as you restart the oven, then it is likely a bad wiring or a bad connection.
Ensure first that the circuit breaker is ok and well in place, then proceed testing wirings.
Check connectors to buners, hobs, and controls panel.
If all wirings and connections are OK, the what reamins is a faulty control panel or a fault on some of the knob controls.

Sep 04, 2008 | Kitchen Ranges

1 Answer

WE have a GE Stove top Range. The burners aren't

If you have power to the stove as in the oven light works and the clock works but the burners and oven will not work you only have 120 volts coming to the stove. The stove requires 240 volts for the burners and oven to work. Check the service panel for a blown fuse. There will be 2 fuses in the fuse holder. One of them is blown. If that is not the case then one of the wires has come loose either in the service panel or in the outlet behind the stove. Use a multimeter to check the input voltage at the outlet.

Apr 25, 2010 | General Electric Stove/Oven/Range Chrome...

2 Answers

The oven will not light on my Whirlpool gas oven Mod SF368LEPQ 2. The stove top burners still light.

Sounds like you need an bake element ignitor if the bake doesn't work but if the broil also doesn't work, it could be the electronic clock/timer control. the part number for the bake ignitor is 8054129 .Best off to call a reliable service company such as Sears.

Jan 31, 2010 | Whirlpool Ovens

1 Answer

Burners abruptly stooped working on top of the stove

check electrical panel of your house and make sure both breakers are in the on possition ..

Jan 04, 2010 | Frigidaire FEF352 Electric Kitchen Range

1 Answer

I have kitchen aid in the counter range, the bottom heat element is bad. The element has burnt and has a 3" piece that has separated. At the same time the oven stopped working the burners stopped working...

The oven element will not affect the top burners, Unless it tripped the breaker at the panel when the element burned it two. Is there power to the stove? The top burners have their own power and control separate.

Aug 01, 2009 | Kitchen Ranges

1 Answer

The indicator lights and clock on our glass top slide in stove work, but the burners and oven do not heat

From what you are describing, the power to your stove is incorrect. The diagram indicates the voltages that should be present at the receptacle, I suspect one of the 110 volt legs is bad at the receptacle or circuit breaker. The clock operates on the good 110 volt leg. The burners need both 120 volt legs to be good because the burners and oven need 220 volts to work.


Jul 11, 2008 | Frigidaire Kitchen Ranges

1 Answer


how do I get my self cleaning to come on in my hotpoint stove

May 22, 2008 | Ovens

Not finding what you are looking for?
GE JBP82 Electric Kitchen Range Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides