Question about Canon Powershot SX110 IS Digital Camera 9.0MP

1 Answer

Canon Powershot SX10 LCD screen is white after replacement

I've just replaced the damaged LCD screen on my SX10 with an LCD bought as new item at eBay. The replacement was easy and without any problem. However when I turn on the camera, the LCD is bright & evenly white. Otherwise the camera works normally (using the viewfinder with the LCD screen closed). Any help is very welcome.


Posted by on

  • sh054321 Oct 03, 2009


    Many thanks. Anyway the LCD works fine now. After I posted the problem, I went back and reconnected the old LCD and it worked (though scatched). Then I reconnected the new LCD and paid special attention to insert the LCD flat cable firmly into the print connector. This worked and all is OK now. Many thanks and yr fast response was appreciated.

    Rob Proeme


  • sh054321 Oct 03, 2009

    Even before receiving the response I had solved the problem simply by re-inserting the LCD flat cable firmly into the board print connector. Meanwhile I was impressed by the fast response I received as part of the premium support service.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Canon Master
  • 13,433 Answers

Either the screen is faulty, not properly connected or the board the lcd is connected to has a fault.

Not much to do in this case, reset the camera, reconnect the lcd cable and try again, if it still doesn't work, I'd suggest you contact the seller for a new lcd display if its constantly white.

if the same thing happens with the next screen theres a fault in your camera, and it might no longer be worth the replacement of the mainboard - in that case take it to a local camera repairer to look at and see if theres anything to be done.

Posted on Oct 03, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Scratched LCD screen

Not much can be done to the screen than to try using some LCD screen cleaners to clear off the dirt. These are avaiilable at TV dealers or accessories stores which can help a bit.
If not the only way out is to replace is the picture is very bad. If not try to see if you are able to SWAP one from a damaged scrapped set.

Aug 25, 2011 | Canon PowerShot SX10 IS Digital Camera

1 Answer

Lcd display will not work on canon power shot sx10 is - camera will take pictures and i can review pics on the lcd display but will not show any pictures when trying to take photos. it started this problem...

Of course! You mentioned the beach so maybe salty water or sand got inside the camera. (Salt can interfere with the electrical connections inside the camera and possibly short-circuit.) Send it back for repair to replace any damaged parts you may need. They'll send it back good as new :)

Jun 29, 2010 | Canon PowerShot SX10 IS Digital Camera

1 Answer

LCD screen not working


Ok, you should know that there is a cable which connects the lcd monoitor to the circuitboard of the camera itself. it could be that the cable is just slightly pulled out.

I know that there is a setting as well which enables you to use either the viewfinder or the lcd. Look for a button which looks like a screen with a star in it, this will either activate the lcd or the viewfinder.

At the link below you will be able to download the manual for this camera for further troubleshooting.

Hope this can be helpfull.

Kind regards

Jan 01, 2010 | Canon PowerShot SX10 IS Digital Camera

1 Answer

My Canon SX10IS is has a white line showing up...

Have you been to the support section of the Canon website to see if there are any firmware updates for your camera?

Dec 20, 2009 | Canon PowerShot SX10 IS Digital Camera

1 Answer

LCD screen don't work all the time

pls see the link

Flex Cable might be damaged u will get all instructions and answer on this page u can do it urself it is a frequent fault in screens that have twist function \

Pls rate me WELL !

See this link for Repair Instructions

Apr 14, 2009 | Canon PowerShot SX10 IS Digital Camera

1 Answer

White LCD screen

The LCD connection may be loose or the LCD itself broken. You may need to have a service centre replace the LCD unit.

Apr 13, 2009 | Canon PowerShot SX10 IS Digital Camera

1 Answer

Replace LCD screan in canon powershot SX10 IS

If you do a Google search for 'digital camera parts' the first listing is a website that can help you. The LCD is $65 with shipping.

The website name is: Darntoothysam com, then search by "SX10" and you will see it.

How do I know this? I own the business, that's how. We specialize in LCD and lens repair for affordable prices. If we can help please let us know.

Thomas D.
Owner, Darntoothysam com

Mar 24, 2009 | Canon PowerShot SX10 IS Digital Camera

Not finding what you are looking for?
Canon Powershot SX110 IS  Digital Camera 9.0MP Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts


Level 2 Expert

176 Answers

old marine
old marine

Level 3 Expert

2147 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides