Question about Kenmore 96422 / 96424 / 96429 Electric Kitchen Range

1 Answer

Error code f31 flashing

Error code f31

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The F30 error code indicates that the electronic oven control board detects an "open" oven temperature sensor probe circuit.
This is usually caused by a failed oven temperature sensor probe.

Replacing this component will likely fix your problem.

You can order this part from www.searspartsdirect.com website.

If you replace this part yourself, be sure that you unplug the range to disconnect electrical power before accessing this component.

On some models, you can replace the probe by removing the screws that mount this component to the inside back wall of the oven.
Carefully pull the probe inside the oven cavity until you encounter the wire harness disconnect plug.
Unplug the sensor and replace it with the new one. Mount the new probe on the back wall of the oven.

On some models, you have to remove the lower back oven panel to access the sensor probe.

If you replace the probe and still have this problem, you will need to unplug the range and measure the resistance through the violet wires that plug into the control board (this is where the sensor probe circuit is connected to the control board).
If the resistance through the oven temperature sensor probe circuit is normal (about 1100 ohms at room temperature) then the electronic oven control board will need to be replaced.


http://media.fotki.com/1_p,wbwdqtgkkqdrrfgxgtqsskgwtqkq,vi/ktrrwffdrxkddstsrtq/1/1303472/5961857/image45310img-or.jpg


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does f23 error mean?


Display shows an error code - Front-load washer ' Whirlpool ...

https://www.whirlpool.com/...error-code...w...
Whirlpool Home AppliancesCheck the following answers for error-code related issues you can correct: ... Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33.

What does error code f23 flashing mean on a Whirlpool ...


Nov 30, 2015 | Washing Machines

1 Answer

What does F31 mean on Frigidaire stove?


Thank you for your inquiry, friend!
Based off what you have described your Frigidaire range is displaying an F31 error code and you would like to know what it means. An F31 error code means a shorted probe connection. This could be a possible problem with your sensor probe, control panel, or probe connector. I would recommend performing a reset on your range and you can do that by flipping the household circuit breaker off for at least ten minutes. If that does not correct your issue you may need to seek help from a professional technician for proper diagnosis and repair. Best of luck! -Matt

Aug 12, 2015 | Frigidaire Kitchen Ranges

1 Answer

/lfgf3014lbcwhat does f31 mean


Hello Jim, thanks for your post!

From my understanding your Frigidaire range, LFGF3014LBC, is displaying an error code of "F31". The "F31" error code stands for a shorted probe connection which could be an issue with your EOC (Electronic Oven Control), wiring harness, or RTD (Resistance Temperature Detector). I would suggest performing a reset on your range to help clear out any false error codes. You can reset your range by flipping off the household circuit breaker for ten minutes. I hope this information is helpful to some degree. -Matt

Mar 30, 2015 | Frigidaire Gallery 30" Self-Cleaning...

1 Answer

What does f31 error mean on fregidare gas range


Good Morning friend, thank you for your inquiry!

From what you have described your Frigidaire range is displaying an "F31" error code. An "F31" stands for a shorted probe connection. This could be an issue with your RTD (Resistance Temperature Detector), EOC (Electronic Oven Control), or wiring harness. I would recommend performing a reset on your range to help clear out any false error codes. In order to reset your range you need to disconnect power from it for roughly ten minutes. If this does not help resolve your issue and you continue to receive the error code you may need to have a professional out to perform a proper diagnosis and repair. This will help you avoid any unnecessary part purchases. -Matt

Mar 30, 2015 | Frigidaire Gallery 30" Self-Cleaning...

1 Answer

Error code F31 on hotpoint wd72


I find no F codes for it only E 30 or 31 means motor failure and call service

Mar 18, 2015 | Hotpoint Washing Machines

1 Answer

Kenmore elte oasis electric dryer error code f31


f31 code is a thermistor problem ,if you need help go to www.appliancerepairservice.com

May 22, 2012 | Kenmore Dryers

1 Answer

Kenmore model 790.7851 gives an F31 error code this is


hello,

The F31 is an error code indicating that water temperature sensor error. There is a chance that there is a loose wire connection on the water temperature

what you have to do to fix up this is to unscrew (open)ranger then trace the wire down to the reader sensor/panel clean all form of water and dirt around them after all this make sure that all wire are in there position mostly on the panel then couple it back as it was with this the problem of F31 is solve please do this with care

thank you.

Jun 13, 2010 | Electrolux Kenmore 30 in. Gas Freestanding...

1 Answer

What is code F31


The F31 error code signifies that the heat sink in your washer got too hot. The motor control unit (MCU) stops the motor and sends the error the the central control unit (CCU) and the CCU resets the MCU. After this happens 4 times the F31 code will show.

It could be an electrical issue in either the MCU or CCU. Many times simply unplugging the unit will fix the problem. Otherwise, service must be called for.
A&E Factory Service is a nationwide servicer. Their telephone number is 1-800-905-9505

Feb 24, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have an error code F31. What does this mean


f31- suction pressure protection. Short gas or no gas. Check for leak and rectify.

Nov 14, 2009 | Panasonic Room Air Conditioner CWXC104HU

2 Answers

Starts beeping and F31 ERR flashes


Any F code error indicates a fault has been detected . Press Clear/Off to clear display and stop beeping then reprogram the oven. If the fault reoccurs record the fault number press Clear/Off and contact an authorized service agent. If you have access to the internet you can download a manual for this appliance go to www.frigidaire.com/support/support.asp
On the customer services page click on product manuals and you will be abe to download the manual and print it off.

Apr 21, 2009 | Frigidaire FEF352 Electric Kitchen Range

Not finding what you are looking for?
Kenmore 96422 / 96424 / 96429 Electric Kitchen Range Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Cindy Wells

Level 3 Expert

5063 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...