Question about Olevia LT37HVS 37 in. LCD HDTV

4 Answers

My Olevia TV lost its channel setup.

A 37 LCDHD TV It was working then it became blue and said no signal available.I only got a cCD with it for instructions and my computer will not read it.

Posted by on

  • 7 more comments 
  • BAM02 Jan 08, 2008

    My Olevia LT37HVS 37" HDTV LCD TV went to a blue screen with no sound no picture and with "no signal". It has done this before but has "fixed itself". What is wrong? If I have to take it to a technician who do I take it to?

    Thank you

    bevmathison@juno.com

  • gabby2lolli Feb 04, 2008

    no channel list

  • Anonymous Feb 09, 2008

    Our Olevia 537H B-12 will not hold a tuner signal. It worked fine for a few months. Now when we turn it on we get our tuner channels for a few minutes and then get a blue screen and "No Signal" message. I hooked up our coax cable to a VCR and then to the Composite 2 source to confirm our signal was good from the coax, and it is.

  • Anonymous Feb 19, 2008

    looking to set up digital channels

  • Anonymous Mar 03, 2008

    I experienced the same problem. I was watching a movie with HDMI and, for no reason, the screen went blue and now I can't watch videos. The message that appears is "no signal."

  • Laslo Mar 08, 2008

    I had to unplug my olevia TV when I pluged in now it there is no memory

    how do i reprogram to find channel for DISH tunner

  • Anonymous Mar 10, 2008

    lost channel auto setup

  • Anonymous May 29, 2008

    Every time I turn on tv need to go to the red button on the left and go to Composite 1 in order to get picture. Is there any easier way to program setup directly?

  • love1973 Mar 20, 2009

    I have an Olevia television HDTV LCD Television and the remote will not allow the television to program the cable channels automatically.

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Lost channel auto setup

Posted on Jan 17, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

NEED HELP INSTALLING A OLEVIA 237T (SETUP) TO CABLE WIRE.

Posted on Aug 21, 2009

Ad

Thin line means that tv needs to be repaired. call cust service.

Posted on Sep 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My olevia tv was installed on the wall and the picture has lines like its broke what can i do?

Posted on Jan 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Olevia channel setup


With the remote of dish you will control the dish box. The tv control is only necesary to set the signal on channel 3 or Aux to get the signal from the dish box.

Now Your main remote will be dish remote control. Set your tv on channel 3, then turn on the dish box, and use normally.

Oct 02, 2008 | Olevia LT26HVX 26 in. LCD Television

1 Answer

How do i get local digital channels


The HDTV tuner in the set must be of proper spec for your area. This is the start. At the rear you should have an RF connector. You will need to connect an HD type TV antenna. There are indoor TV antennas available. These work okay if the signals are strong enough. It is best to use an outdoor and mount it on the top of a building in order to have proper line of sight reception.

If you are sure your can meet the requirement with your TV and location to receive local TV stations then go in to the menu of the TV set and let it do the auto setup to receive local TV signals. Depending on the are for where the set was sold, there should be some prompts to satisfy about the type of signals that will be received. Once set, let it do the auto setup. This can take a fair number of minutes.

May 13, 2014 | Olevia LT37HVS 37 in. LCD HDTV

1 Answer

Factory reset was reset---now we have a no signal on the screen


Please go to tuning menu and select Auto Scan/ Auto Tuning to tune all available channels to store in tv memory.
Factory reset actually delete all data/ settings in memory chip and set tv as it was in-box.
Thanks.

Jun 13, 2010 | Olevia 237T 37 in. LCD TV

1 Answer

I have an Olevia 37" model 537-B11. How do I take it apart and look first for a fuse on the main board to fix the "no signal" message that I get when using the HDMI cable. I know the HDMI cable and cable...


no signal message is not related to fuses..you have to autyo search the channel of your local tv station thrue your remote control goto menu and search channel.

May 20, 2010 | Olevia 227-S11 27 in. LCD TV

1 Answer

I moved from TX to MX and my olevia rc-ltl willnot get the programing of present cable service.What you suggest I do?


Different cable systems use different frequencies for the TV channel numbers. There should be some kind of selection in your setup menu to switch between broadcast TV channels and different cable/satellite channel schemes.

Jan 09, 2010 | Olevia LT37HVS 37 in. LCD HDTV

1 Answer

The tuner's not working and won't let add channels.


no channels? blue screen? no signal?
Solution:
A Converter hdtv box... is the SOLUTION!!! try it..youll see!!!
I had the same scan-turner problem with my Olevia "digital" Olevia tv!!
Because I was curious i tried that to see what happen..and it worked!!
Olevia tv fixed!!!
Easy..your tv is not able to scan cahnnels...then, the solution is to plugging "a thing" that can do that: a converter box.

Oct 19, 2009 | Syntax Olevia 527-S11 Television

2 Answers

I have an Olevia 23t lct hd tv. I am plugged in


you said you are using composite cables..? that means you have some kind of cable box ? if you want to get HD channels you have to use a HD box that is supplied by the cable company.. the HD cable box then has to connect to the tv with component cables (green,blue, red cables) or HDMI cable.. to send the HD signal to the television.

May 13, 2009 | Olevia 237T 37 in. LCD TV

2 Answers

Samsung hdtv geart sound bluescreen is all I get


A BLUE SCREEN IS AN INDICATOR OF UNDETECTED VIDEO SIGNAL. TRY A DIFFERENT SOURCE ON THAT INPUT.

Feb 01, 2009 | Olevia LT37HVS 37 in. LCD HDTV

Not finding what you are looking for?
Olevia LT37HVS 37 in. LCD HDTV Logo

Related Topics:

4,816 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olevia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you an Olevia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...