Question about Homelite Consumer Products Backpack Blower/Vac, Carb

1 Answer

How do i adjust the carburator on homelite weedeater

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 168 Answers

It has two screws or at least it should. One with the letter L next to it and the other with the letter H next to it. Turn both in lightly until they seat. Then turn the L screw out 1 1/4 turns and the H screw out 3/4 turn. This should get the unit running unless you have other problems. then fine tuning may be required after you get it running. If it bogs out when throttled turn the L screw out another 1/16 of a turn. Then if it won't rev like it should turn the H screw in 1/16th of a turn.

If this doesn't work then you'll probably need a carburetor kit and tune up.

Good luck
skidooer

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Correct fuel mixture for homelite zip start weedeater.25cc,ut20785..


50:1 five liters unleaded petrol and 100ml 2 stroke oil

Sep 09, 2014 | Homelite Garden

1 Answer

Weedeater and Homelite shafts interchangeable?


Just give it a try. Some different brands will interchange. I have done this with a Toro and it is still running.

May 18, 2014 | Homelite Garden

1 Answer

Carburator adjustments


Should be two holes on the side of the case towards the back. One is for high adjustment and the other for low adjustment. Hope this helps.

Apr 24, 2014 | Homelite Garden

1 Answer

Weedeater 25 cc gas leaf blower-only run on full choke and raise back up and it ies.Any solutions??


The raising or reving back up before it dies is a sign of fuel starvation. Check the diaphram in the carburator.

Mar 06, 2012 | Homelite 'Yard Broom' Leaf Blower

1 Answer

Model ut21004 homelite gas weedeater want stay


fuel issue, look for cracks or holes in the two lines from tank to prime bulb, check prime bulb, adjust/clean carburetor, may also need to check filter inside tank it is connected to the bigger of the two hoses. Tim

May 30, 2011 | Homelite Mighty Lite Lawn Trimmer

1 Answer

I have a Weedeater brand weedeater that needs the carburator adjusted. I am not sure how far the adjustment screws need to be turned out. Can you help?


Start with about 1 1/2 turns. Then, when you get the motor started, hold the throttle to full and adjust the screw until the motor revs up and evens out. Likewise for the low speed. If you give it the gas and it dies or stutters, turn the other screw slightly 'til it revs up without hesitation.


Aug 15, 2010 | Garden

1 Answer

Can't adjust carburator.


look on the carburetor. there will be 2 screws right beside eachother. one is an idle jet and the other is the main jet. if you want faster or slower idle speeds, adjust idle jet. if you want more power, adjust the main jet. you have to get them set just right . they might smoke a little bit because you are throwing more fuel to it which means you are getting a richer mix

May 12, 2010 | Homelite Mighty Lite Lawn Trimmer

2 Answers

Carb settings mixture jets on a homelite weedeater st155


ther is no set setting but to get it to run so it can be adjusted. lightly close the high off then open the low about two turns. try to start if starts slowly adust the low screw till it runs normal with the choke all the way off. then start to add throttle while turning the high out till regiured rpms ar reached with no misses. this takes awhile even fo a seasoned mech and may require several attempts

Dec 24, 2009 | Garden

1 Answer

S31 Weedeater only runs with chock fully on


it is the carburator if you take off the carburator their is two plates one on each side one is the pump and one is the inlet which has a screen the screen is probably clogged other side is the needle and seat but you will probably fine its the screen

Itsman

Sep 03, 2009 | Homelite Consumer Products 4.0 Amp, 13 In....

1 Answer

New carburator doesn't passed fuel


Are you sure that that the replacement is the correct one. Also, why did you have to replace the carburetor . Did you verify that the carburetor was the problem? Did the weedeater run by priming? Did you check the pump and lines? If these methods were tried and did not reveal the problem, then I suggest that you get professional help.

Oct 23, 2008 | Ryobi 15" Electric Factory Reconditioned...

Not finding what you are looking for?
Homelite Consumer Products Backpack Blower/Vac, Carb Logo

555 people viewed this question

Ask a Question

Usually answered in minutes!

Top Homelite Garden Experts

roeb

Level 3 Expert

540 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Mike Squire

Level 2 Expert

420 Answers

Are you a Homelite Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...