Question about Princeton Digital HC-909R Clock Radio

1 Answer

Princeton Digital HC-909R

I have lost remote for hc909R. Can I tune the radio staions on the unit?

Posted by on

1 Answer

Re: Princeton Digital HC-909R - Princeton Digital HC-909R Clock Radio Clock Radios

Push the scan button

Posted on Jan 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Bose will not tune and no sound

First make sure you haven't selected Aux or CD by mistake. Push the Radio button on the remote and try to tune. If that doesn't work, try unplugging the power cord. Wait 10 seconds, then plug it back in. This resets the system, which may fix your problem.

Sep 01, 2014 | Bose Wave Radio

1 Answer

How do I set the time and alarm on the TDK TA4210BK, I've lost the manual and can't find anywhere to download it from.

Its actually really irritating. You have to turn off all the alarms i.e. so no little bell icons are showing in the display and also turn off the radio i.e it shows OFF. Then, and only then, if you hold down the SET button you will be taken to the time setting menu which starts with a blinking 12H sign. Once in this menu its like any clock radio - you push up or down on the right hand side to select higher or lower numbers and hit SET again to progress to the next feild. You must complete the entire setup menu i.e you must keep hitting SET until you are back at the main screen or it will just forget what you entered go back to whatever it was before you started. Very opaque if you dont have the manual, so I thought everyone else could get 45 minutes of their life back. BTW, the holding down SET with the iPOD in the dock doesnt work for me - its supposed to according to some entries on the web.

Mar 19, 2013 | Timex Nature Sounds LED Clock Radio

1 Answer

I need help setting the alarm on my radio controlled digital clock.

1- Turn over your Seth Thomas digital clock. Use your finger to remove the cover to the unit's battery compartment. Insert two AA-size alkaline batteries into the battery compartment and replace the cover. Certain Seth Thomas digital clock units will also have an optional alternate power source in the form of a standard AC power cable that plugs into a wall outlet in your home.

  • 2 Place your Seth Thomas solar-powered digital clock in front of a light source, such as on a window sill or beneath a lamp. The black strip on the top of the unit is the solar sensor, so as long as light is shining down on that strip, your clock will be powered on and ready to use. The sensor stores energy throughout the day so that it can work at night with no direct light contact on the sensor.

  • 3 Press the time zone button that indicates your current time zone. These buttons are located on the back of the unit. For example, if you are in the eastern time zone select the "EST" button. Turn the unit back over. It will now be displaying the correct time on its digital screen.

  • 4 Use the "Alarm" switch (if applicable) to enable and disable the clock's alarm. Press the "Alarm" button, followed by the "Hour" and "Minute" buttons, to set the appropriate alarm time based on your needs. Use the "Alarm HI LO" switch to set the volume for the alarm.

  • 5 Press the "Weather" button to tune your Seth Thomas digital clock to its built-in local weather radio station (if applicable). Certain Seth Thomas clocks have this radio weather functionality built in, while others don't. If yours does, the aforementioned "Weather" button will be located on the front of the unit.
  • May 28, 2011 | Seth Thomas Radio-Controlled Howard Wall...

    1 Answer

    Remote not working, changed batteries in both the unit and the remote, what now?

    The easiest way to kow if your remote controller is not working is to point the LED emitter to any digital camera and it will register, you will see the diode emits a certain light. If no emission of lihjt that means your remote has problem!

    Check the battery and its terminal.
    Tell me if it works.


    Feb 09, 2011 | Bose Wave Radio

    1 Answer

    Volume control does not turn volume down. Lost remote control CD Receiver LT-1

    I have opened the same unit up. The volume control knob moves a plastic paddle against a right & left micro switches. The paddle is connected to the knob by a very thin piece of plastic which breaks very easily. I tried to glue a different piece of plastic on , but it only worked for a little while. It was a pain to assemble & reassemble the unit. I do not recommend trying it. Just buy another remote (about $35.00)!
    Good Luck

    Dec 07, 2009 | Teac LT-1 Clock Radio

    1 Answer

    Insignia clock radio goes to 12:00 after turning off power

    I found this solution by reading some reviews. A reviewer said it was caused by a weak backup battery that powers the display. He said to change the lithium backup battery of the main unit with the backup battery in the remote. I tried it and now it works. I can turn the unit on and off and it doesn't reset my memory. But this hasn't solved my problem with setting the alarm.

    Nov 23, 2008 | Insignia Digital Clock Radio with Apple...

    1 Answer

    Bose Wave radio

    Use the tune arrow buttons on the remote - left arrow tunes down; right arrow tunes up.

    Once you have the right frequency for the station you want to preset, press and hold the number button that you want to store it under for around 5 seconds

    Jan 10, 2008 | Bose Wave Radio

    1 Answer


    Tune the radio to the station you want using the up and down tuning indicators then select a button on the remote for that station and mash it for several seconds and that button should be set for that frequency.  You might have to do the selection on the radio itself instead of just using the remote but once the buttons are assigned they will work with the remote.

    Dec 27, 2007 | Bose Wave Radio

    2 Answers

    Virgin Pulse model VP-07 CD clock radio

    1. To set the clock to leave the unit in standby mode. (Plug in the AC cord to a wall outlet without switching unit on). 2. Press SET button for about five seconds until AM--12:00-- stops flashing. 3. Press down TUNING button to adjust hour, and up TUNING button to adjust minute. 4. Press SET button to confirm time set.

    Sep 11, 2007 | Virgin Pulse VP-07 Clock Radio

    Not finding what you are looking for?
    Princeton Digital HC-909R Clock Radio Logo

    Related Topics:

    100 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Princeton Digital Clock Radios Experts

    The Knight
    The Knight

    Level 3 Expert

    66685 Answers

    Gyula Lacz

    Level 3 Expert

    482 Answers

    Cindy Wells

    Level 3 Expert

    4723 Answers

    Are you a Princeton Digital Clock Radio Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides