Question about Computers & Internet

1 Answer

Averatec 1020 cpu seems glued to motherboard. Is this possible? I am trying to upgrade the cpu with a new 1.6 intel processor. I have removed the heatsink and there is no release lever or anything else that appears to be physically holding it in.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 191 Answers

CPUs are a snug fit. Be sure there isn't a lever to release the chip. Most Pentium processors do have the lever. Use a chip puller to pull the CPU. Absolutely do not use screwdrivers or pliers. Chip puller is best to give even pressure on both sides and allows pulling straight out.

Posted on Oct 03, 2009

Testimonial: "Thanks...I will try that"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cpu upgrade


A) http://www.fixya.com/support/t18040647-cpu_upgrade

B) http://www.fixya.com/support/t18040647-cpu_upgrade

(Last time I looked, this was the world's largest product support website, and there ARE technicians from AROUND the world; on here!!!!!!!! Do we count as an 'IT techie'? ........Lol!)

In all three of your posts, not once has the laptop manufacturer name, and model number been stated.

Processor (CPU) support depends on;

A) What processor socket is on the motherboard?

B) What motherboard chipset does the motherboard use?

C) What is the processor that is installed now?

With these parameters known, THEN you can think about CPU (Processor) upgrade.

1) CPU (Processor) has to FIT, the processor socket being used.
THIS, is also IF the motherboard HAS a processor socket; and is NOT soldered directly to the motherboard.

2) The motherboard chipset supports the Processor (CPU)
It has to be known if the motherboard chipset will support, the CPU (Processor) that you want to upgrade to.

For older computers the motherboard chipset consists of;
A) Northbridge chip
2) Southbridge chip

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

With this technology the Northbridge chip, of the motherboard chipset; is what determines Processor (CPU) support.
Newer technology, such as used per se by the Intel Core i processors, does NOT use a Northbridge chip.

3) Looking at the existing Processor now, you can determine;

A) Voltage Range: What voltage range does the exisiting Processor use now?
Does the upgrade Processor also fall within this Voltage Range?

B) Core technology, and architecture:
Example:
Existing Processor uses the Conroe Core technology, and the 90nm architecture. (NanoMeter)
Does the upgrade Processor also use the same Core technology, and architecture?

If not is there a BIOS upgrade available?
(The motherboard chipset also comes into play again, here)

Enough of this generic prattle.........
Post the laptop manufacturer name, and model number.
Then I, or someone else can give you the facts; and not generic information.

Post back in a Comment.
Regards,
joecoolvette

http://www.hardwaresecrets.com/article/535

http://en.wikipedia.org/wiki/Northbridge_%28computing%29

May 05, 2013 | Computers & Internet

2 Answers

I have this motherboard PACKARD BELL BV GA-T671MG. how much ram memory can it have? can i use ddr3? my pcie port supports a 2.2 graphic card?


System
System : PACKARD BELL BV ISTART F2310 AIO
Mainboard : PACKARD BELL BV GA-T671MG
Bus(es) : ISA AGP PCI PCIe USB
Multi-Processor (MP) Support : 1 Processor(s)
Multi-Processor Advanced PIC (APIC) : No
System BIOS : Phoenix Technologies, 255.255
Total Memory : 767MB

Intel Pentium D 3.00GHz
Packard Bell BV (GA-T671MG)
SiS chipset (Si671V11)
DDR2
1024mb ram

PACKARD BELL BV
Model GA-T671MG

Chipset Vendor Silicon Integrated Systems (SiS)

CPU Intel Pentium D
Cpu Socket LGA775 [Socket 775]
Processor Upgrade ZIF Socket
Max CPU Speed 3000 MHz

System Slots 2 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 1024 MBytes
Memory Slots 2
Error Correction None
Use System memory
Maximum Memory Module Size 4096 MBytes

Manufacturer PACKARD BELL BV
Model GA-T671MG

Chipset Vendor Silicon Integrated Systems (SiS)

CPU Intel Pentium D
Cpu Socket LGA775 [Socket 775]
Processor Upgrade ZIF Socket
Max CPU Speed 3000 MHz

System Slots 2 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 1024 MBytes
Memory Slots 2
Error Correction None
Use System memory
Maximum Memory Module Size 4096 MBytes
it seems this might vary i have listed 4
hope this helps

May 17, 2011 | Computers & Internet

1 Answer

Trying to upgrade cpu.


Here's a direct link to the service manual of the NetVista 8303-21A:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/netvista_pdf/24p2969.pdf

On page 13 of this manual:
Microprocessor (varies by model type): Intel® Pentium® 4 processor with 256 KB or 512 KB of internal L2 cache memory and Intel NetBurst™ micro-architecture.

It seems that the computer's motherboard does not support Intel P4 processors with more than 512 KB of internal L2 cache. That's why your P4 2.8GHz/1M/533 Prescott processor did not work.
You will have to either buy another processor with 512 KB L2 cache, or replace your motherboard with one which supports the new processor.

Dec 19, 2009 | IBM NetVista PC Desktop

1 Answer

Celeron 540 upgrade


Aspire 4315 Specifications Specifications
Part Number
Varies by specifications
Processor / Speed
Intel Celeron mobile processor 530/540/550 (1 MB L2 cache, 1.73/1.86/2 GHz, 533 MHz FSB), supporting Intel 64 architecture
if you have a 2 Ghz processor installed, you will have to replace the motherboard to go with a faster CPU.. which will be spendy..
Hope this helps

May 06, 2009 | Acer Aspire 4315 Notebook

1 Answer

I have an intel celeron 1.79 GHZ on my dimension 2350,what is the better processor for upgrade? and is there something else that i should change inside for the new processor?


you said that you want to upgrade ur 1.79ghz celeron cpu.

to upgrade a cpu just check that the packaging of the new cpu matches with the motherboard.
and also check that the motherboard supports the new cpu that you are installing. check this in the manufactures site.

Apr 14, 2009 | Intel CELERON 2.66Ghz CPU AND MOTHER BOARD...

2 Answers

I have 2.6 celeron processor with intel 865 motherboard i am up grade tell us who is processor best


on mb with intel 865 the bigest CPU is pentium 4 @ 3GHz. socket 478
however your MB might require to update microcode for the new CPU.
one more thing: this chipset Intel 865 is obsolete, and intel does not manufacture this cpu type anymore.

Feb 22, 2009 | HP Celeron A , 2.6 GHz (DL458AV) Processor...

2 Answers

Upgrade intel celeron processor 798 MHz


it is better to use intel core2 dueo or intel quad core processor

Jan 12, 2009 | Intel CELERON 2.66Ghz CPU AND MOTHER BOARD...

2 Answers

Problem with upgrading processor


Sounds like the processor you're trying to upgrade to isn't the same frequency. The processor, motherboard, and memory have a matched frequency. For example; a motherboard with a frequency of say PC4200 will only accept a processor and memory of a PC4200 frequency. If you try to use PC5300 memory it basically won't do anything, blank screen, or maybe a beep. The same if you tried to use a processor with PC5300 on the PC4200 board. The best way to find the frequency rating is to look on the memory. They class the memory by frequency, but rarely ever list the frequency for the board or processor. Research the new processor to find out the memory class and then see if it matches the memory in your machine. If it doesn't then the processor won't work. If it does, then new processor may not be compatible, and that means more research.

Jul 18, 2008 | Shuttle AV42 Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...