Question about One For All URC-3021 Remote Control

1 Answer

Remote Code Disk VIP622 to Control Bose 35 SeriesIII

Do you know if their's a remote code to control Bose 35 Series III volume from Dish network VIP622 remote. I can not seem to find a code that will work.
Thank You!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers
Re: Remote Code Disk VIP622 to Control Bose 35 SeriesIII

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Posted on Dec 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

I can't find a code for my BOSE Solo on the Dish network Hopper remote. Can anyone help?

Don't go and search for IR codes as you'll waste your time. Use the learning method. Take your bose remote and put it on a flat surface and point it toward the little square receiver on the dish remote (located on the top left side). Then press the "aux" mode button on the dish remote until all the mode buttons light up and the aux mode light starts to blink. Then press the record button on the dish remote for 3 seconds until the aux mode button lights up and stays lit (it then stays lit during the whole learning program). On the dish remote press the button you want to learn but don't hold it down (I started with the up volume) . Then press the corresponding button on the bose remote but hold that down until the aux mode button blinks once and comes back on (if the mode button blinks three times the dish remote did not learn the command and you should try changing the batteries on the dish remote if it happens repeatedly that it fails to learn). Program the remaining commands by repeating the process of pressing a button on the remote, then pressing and holding the corresponding button on the bose remote. Don't be afraid to do it with the mute and the power buttons too. During this process if you don't press a button for more than 30 seconds it will time out and nothing will be recorded and you will need to start again. To end the programming press the aux mode button. When you are using the bose solo using the dish remote you just need to remember to press the aux mode button first so it flips to command the bose solo.

Dec 30, 2012 | DISH Network IR Remote Control

1 Answer

I can't find a code for my BOSE Solo on the Dish network Hopper remote. Can anyone help?


I can definitely provide assistance with this! Our Hopper receive uses a special function to program the remote for you.

Go to Menu > Settings > Remote Manager. Select the option, 'TV Code', 'DVD Code', or 'AUX Code', based on the type of equipment you are programming. Once selected, follow the prompts on screen and it will automatically scan for codes!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Dec 30, 2012 | DISH Network IR Remote Control

1 Answer


Hello! My name is Becki, with DISH Network. Programming the remote to the TV is a pretty easy process. I have given some codes that should work to program the remote. If not, please let me know!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code


Becki Barned
DISH Network Customer Service

Jul 13, 2011 | DISH Network IR Remote Control

1 Answer

Need remote code for bose 123 surround sound with dish tv

Hold down AUX until the top 4 buttons light up. Then press 2 and then enter code 761 and then #. If 761 doesn't work you can try 780. The AUX button will flash 3 times if the code worked.

Hopefully either one of those work! Those are the only codes I can find.

Nick Franta
DISH Network Customer Support

Jan 23, 2011 | DISH Network IR Remote Control

1 Answer

My dish network remote will turn the bose unit on and off, forward dvd and ect. It will not turn up the volume.

It may be that you are not using the correct code for yourparticular Bose component. I would recommend trying all of these codes: 761,664, 656, and 639. If you are still not able to use your DISH remote to controlthe volume of your Bose component, try doing a power scan. Press and hold theAUX button on the top of your DISH remote until all the mode buttons on the toplight up, then release. Press 2 then * on the number pad, press the powerbutton at the top of the remote, then keep pressing the up button on theremote. Continue doing this until your Bose unit turns off, once it has, stoppressing the up button and press the pound (#) button. Check that the code works by trying several differentfunctions on the remote to make sure it properly operates your Bose component.Keep in mind that some codes may not be compatible with your equipment.

Thank you for being a valued DISH Network Customer!

Phillip Chang
DISH Network Customer Support Representative

Nov 21, 2010 | Bose 35503 Remote Control

1 Answer

IR Remote Control Remote Control: Volume control doesn't work on my remote...


I have provided a link with instructions on how to program your remote to your TV. I have also provided a link with the remote code. I hope this helps.

Program remote to TV, setup 6:
Ray Calo
DISH Network

May 17, 2010 | DISH Network IR Remote Control

1 Answer

Using dish network remote to control volume on Bose 123 system

go here "" to find your remote, then look at the literature to see if Bose is listed or for the code scanning for your remote. good luck!

Feb 14, 2009 | DISH Network IR Remote Control

1 Answer

What is the remote control code?

I finally got mine fixed yesterday. The room code has to be set to 1. The VIP 612 has to be on. A phone call to Bose provided me with about 4 more codes that were not included in the setup manual, and one of them worked. Good luck with the set up, hope this helped.

Jan 07, 2009 | Bose RC-18S Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides