Question about Garden

2 Answers

I have a McCulloch MAC 110, Model 600016C which

I have a McCulloch MAC 110, Model 600016C chain saw which has not been started for over 15 years. I can get it running for a few seconds if I pour gas into the carb. I believe old gas has fouled the lines from the gas tank to the carb. Is this possible? are the gas lines tubes? How are these replaced. I probably need to clear the tank and attach new tubes from the gas tank to the carb. Your thoughts please.

Posted by on

  • Anonymous Mar 23, 2014

    My Mcculloch mac 110 model 600016C will not start. It has a spark and a new fuel line from the tank to the carb.I took a syringe full of fuel mixture and injected into the carb and it ran for a few seconds.Could my carb need rebuilding or replacing? This saw has some age on it.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,220 Answers

The IPL (exploded parts list) for your saw can be found here:
http://www.mymowerparts.com/pdf/McCulloch_Parts_Service_Repair_Manuals/Gas_Powered_Chain_Saws/McCulloch_Gas_Chain_Saws_Parts_Manuals_11_600016C_MAC_110_01_77_to_02_83_IPL_95807_R2.pdf
Page 6 item 21.
You have to remove the engine to access it.

ArboristSite.com Chainsaw thread (free to join)
http://www.arboristsite.com/forumdisplay.php?f=9
There is some discussion about the proceedure in the McCulloch thread. Its a good little saw. I'm awaiting oiler parts on mine. HTH
Lou

Posted on Oct 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

I am sure that you can find an online manual or number in the yellow pages that will help

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to find parts for a MAC 110/Model 60016C McCulloch chainsaw


Here's a link to your chain saw. Model Profile MAC 110 Parts are very hard to find for these .I think they went out of business.

Oct 04, 2016 | McCulloch Garden

1 Answer

Hello,I have Mac 110 model#600016c It`s in need of a little TLC The saw is about 25yrs.old and has never hadany work done on it.I need to know what the spark plug gap should be and what the gas/oil mix...


Spark plug gap should be: 0.020" and the fuel to oil ratio is 40:1. Be sure to use fresh fuel and a modern synthetic saw oil available at home centers, hardware stores, and saw dealers. Mix well in it's own container and be sure to shake the container thoroughly each time just before filling the tank to prevent oil starvation. Hope this helps!

Dec 01, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

McCulloch Mac 110 saw 600016C 14-852292 Manual


go this free manual site,no crappy ads just asks for 1 answer when you download a manual. it is a great resource
http://www.manualsonline.com/

Sep 10, 2010 | Garden

2 Answers

I have an old mac 110. I believe I need the chain tension adjuster as I am not seeing how to tighten the chain. I can't find my manual so I don't have a part list.


Loosen 2 nuts that are on middle of inside end of bar closest to motor, on retaining plate. Dig out shavings & dirt on outside of that plate there is a recess hole. In it is a adjustment screw to tighten chain. Screw in till it takes up the slack in chain. Retighten 2 nuts when finished.

Jun 30, 2010 | McCulloch Garden

1 Answer

My 110 model chain saw sucks chain oil back into the piston cylinder. When I remove the spark plug and pull the cord it spews out red chain oil. What is the remedy


Did you adjust the oiler? To far CW might cause this. The automatic oiler is driven by an impulse line from the crankcase. If the piston assembly is to deep or has failed there is a direct line into the crankcase.
McCulloch Manuals
Illustrated Parts Lists: (IPLs) are fairly simple, on the underside of McCulloch saws is a black and yellow tag; the upper number (“Mac 110” 600016C may also be a _# instead of letter 600016_03) is the model, below it a serial number (11-18555). These 2 numbers are combined to create an IPL number (“Mac 110” IPL number = 11-600016C). The IPL number can be used to find the correct IPL for every McCulloch parts supplier I have found. If the parts supplier only list part numbers the proper IPL is the source for the part number.

This is a little complicated so I am going in small steps.
http://www.m-and-d.com/parts.html
Click “Illustrated Parts Diagrams ON LINE”
Click “Click Here for Parts Lookup”
Changes to “Select OEM” Window reads “Briggs & Stratton ▼” Click the arrow and select “McCulloch Power”
Click “Gasoline-Powered Chain Saws”
Click “11-600016Letter or YourDashNumber”

Every Oil Pump will eventually cross to
Entire pump assembly:
219989 Kit Pump Assy (Oil) $9.29
O-ring
110653 O Ring $0.75
There is a shipping and handling charge from M & D (about $9) if all parts in same container only one fee.
I have found McCulloch parts here I can get no where else and they are reasonable.


You can download a complete parts breakdown for your saw here using the IPL constructed above:
http://www.mymowerparts.com/pdf/McCulloch_Parts_Service_Repair_Manuals/Gas_Powered_Chain_Saws/
Please see if the parts you need are available here. They were not when I ordered them but it is a nice way to say thanks for providing the IPL. I hope you find this helpful.
Lou

Dec 18, 2009 | McCulloch Garden

2 Answers

I have Mcculloch Mac 10 10 chain saw year unknown


Put a small amount of fuel mix in the carburator. If it sputters investagate fuel system.
Lou

Oct 08, 2009 | McCulloch Garden

1 Answer

Sawwon't start or run


On my 110 you take off the front section of the saw body to get et the fuel tank and remove it to get at the fuel line. There isn't much room to work in there so be patient.I'll bet your carb needs new diapragms I bought my manual on e-bay.hope this helps

Sep 08, 2009 | McCulloch Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

1,343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...