I know I had voided my warranty, but it has long been over anyway. I had open up the side of the camera ( where the lcd screen is attached )
My screen first went grayish, as I put most of the srews back in the screen went black. The shutter works fine and I can take pictures take out the sd card and view on my computer. But I need the LCD screen to use for extreme close ups wich was working great. I have also noticed if screws are to tight a PSP screen would do the same.
Can anyone tell me what I should do?
-- My father told me once that if it's not broken dont fix it...
Should have listened.
Thanks to anyone that can help.
Swede00
Comments:
Oct 03, 2009
- Buying a new LCD screen is in the back ofmy mind but has anyone ever heard of the problem caused by screws being tighten to much or too little?
Oct 03, 2009
- Buying a new LCD screen is in the back ofmy mind but has anyone ever heard of the problem caused by screws being tighten to much or too little?
Oct 20, 2009
- I had purchased the LCD and replaced it. Still nothing black screen, any other suggestions? I am thing about taking the camera completely apart ( filming it, so I can always look back if I forget a step ) and checking all wires, also noticed something that looks like a small battery on the white back plate after removing the LCD screen could this be part of the problem?
Thanks to anyone in advance!
My camera has a white speck of dirt underneath the first lens, and does interfere in pictures and...
(More)
My camera has a white speck of dirt underneath the first lens, and does interfere in pictures and videos. Is there a way to clean it out?
camera used in light rain, flash banged and quit, works otherwise is it possible to fix myself with...
(More)
camera used in light rain, flash banged and quit, works otherwise is it possible to fix myself with no particular qualifications
the date stamp is turned off and on the menu screen I cannot scroll down to the date stamp to check...
(More)
the date stamp is turned off and on the menu screen I cannot scroll down to the date stamp to check yes, it goes as far as grid lines and then back to the top