Acer orbicam

There is a utility bar that you can install that lets you change the default application folder:

** Note ** When the My Pictures or Pictures folder gets full, camera will not work - Cut and Paste all pictures in that
folder to another folder and restart Orbicam program.

If that does not work then do this:

Start - Programs - look for Acer Empowering Technology then Acer E-Recovery - The look at the bottom and you will
"Backup", "Burn disk" and Restore" choose Restore - choose Apps and Drivers at the bottom of Restore tab (it will say
extracting) - once extracted - click Install - click Vista or (XP) on the left - click Drivers - click Camera or CCD - on the
right side of the screen, then look for Bison driver or (or your model which can be found in device manager - control panel - system - device manager - Imaging devices) you have then click a phrase that has something like "Install now", follow on screen instructions. Then repeat steps above and instead of driver choose Bison (or your model which can be found in device manager - control panel - system - device manager - Imaging devices) Utility

What won't work with it, It don't turn on at all ? You can not see the power light when you plug it into your laptop ? Maybe you unplugged while it was on. I need more info on exactly what happened. Maybe drivers got removed somehow. did you try to use you webcam on another pc or laptop and make sure it is working still, Try that and get back and let me know if it is still working. Then we can figure out what we have to do next, I would think if the cam works in another computer you may have to download the drivers again, and also make sure the Usb is still working by plugging in a sandisk or similar Usb device, Write back here and let me know if its not working Yet. And some more info on what else is happening. OK Happy Holidays