Question about Yamaha HTR-5730 Receiver

Open Question

Regarding SANSUI RZ-6700AV

I have got a Sansui RZ-6700AV with me. This was a new one, but all the displays are ok, but, the there is no audio output at the speakers or at the headphone output. The remote is working very fine, Sir, can you help me by saying what the problem is or who the authorised service dealer in Kuwait. Please help me Sir, please.

Thank You.
Nick Vinod

Posted by on

6 Suggested Answers

  • 129 Answers

SOURCE: No output

If the board is not cracked , check voltages at the audio output relays. on the input audio terminals side of the relays ,if you have voltage you may Have bad output Ic's

Posted on Jun 29, 2007

  • 4 Answers

SOURCE: this yamaha receiver goes on for 1 second then off.

This is the protection circuitry. Mine is doing the same thing. I'm trying to get a schematic for it right now ;-)


Posted on Feb 04, 2008

  • 2 Answers

SOURCE: Blank display

I replaced it with a 6V lamp. Radio Shack part# 272-1140. It cost $1.49.

Posted on Dec 31, 2008

  • 127 Answers

SOURCE: NO sound, display says CHECK SP cable?

Probably the speakers are not wired correctly. Check this by turning on the receiver without speakers connected. If the message is gone, issue was in the connection of speakers. Check that you have not short-wired the + and -.

Posted on Mar 02, 2010

  • 1 Answer

SOURCE: Sansui

I need a card with SMD ICs located on the circuit board of my sansui RZ6800 AV Reciever.(its a digital card with function IC and many more SMD components)

Posted on Apr 30, 2010

  • 561 Answers

SOURCE: I have a Yamaha HTR 5890 and a AUDIOSOURCE AMP300,

ensure your system balance is set to central.

I hope this was useful.

Posted on Jan 24, 2011

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Find manual for Sansei RZ-8903-AV

Try Googling (Sansui)(RZ-8903-AV)(manual) without parens. Note spelling of Sansui

Aug 13, 2016 | Audio & Video Receivers

1 Answer


Sansui RZ-2605 A/V Receiver no sound

• Check to see if the sound on the stereo receiver has been muted.

• If the stereo receiver has a headphone jack, make sure

no headphones are connected.

• Try a different audio setting on the stereo receiver.

• Check the speaker wires to make sure they are

connected securely to the stereo receiver.

• Try connecting different speakers to the stereo receiver

If these have already been done,

Symptoms still persist, service may be required.

hope these helps,

thanks for choosing Fixya for assistance.

Aug 07, 2012 | RCA Audio & Video Receivers

1 Answer

How do I connect Subwoofer in sansui rz 5200 av model receiver?

You could refer to the instructions presumably available for the unnamed sub. THAT would determine the methods it can use.

Aug 17, 2011 | Sansui RZ-5200AV Receiver

1 Answer

I have a sansui stereo av receiver rz 7000 from 1990 which works on 110 220 230 volts and the receiver has a voltage selector on the back - I need to understand how to move the selector from 220 to 110...

Remove the fuse cover with a flat screwdriver, then pull the surrounding circular black plastic piec straight out and reorient it to show the desired voltage, then plug it in, insert the fuse and cap.

Nov 24, 2010 | Sansui RZ-8150AV Receiver

1 Answer

I have a Sansui receiver Model RZ-1000. The left channel is out. Cheaper to repair? or just buy another similar on ebay?

I have this unit. It is built with disable links for each of the channels, which are easy to replace. The replacement part is only a few dollars.

Oct 11, 2010 | Sansui RZ-5200AV Receiver

1 Answer

Sansui RZ 1500 II-Manual

i have the same problem but my receiver doesn't change sources and its blocked on the last station llistened. the problem appeared when i washed the face of the receiver with a special spray. i think that i have done something very wrong like a short cut in the command processor. any help, please?

May 25, 2008 | Audio & Video Receivers

1 Answer


I need a card with SMD ICs located on the circuit board of my sansui RZ6800 AV Reciever.(its a digital card with function IC and many more SMD components)

Sep 01, 2007 | Audio & Video Receivers

1 Answer

No Audio OutPut When Cooling Fan Starts

I have the same rz 6880 av 5.1! bt im not facing that problem. Iv connected my Bose III series speakers to it...and it plays well. Maybe you need to check your system with a qualified personnel.

Feb 01, 2007 | Sansui RZ-5300AV Receiver

Not finding what you are looking for?
Yamaha HTR-5730 Receiver Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio & Video Receivers Experts

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Are you a Yamaha Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides