Question about Hoover Nextra HNL 3166 Z Front Load Washer

2 Answers

Can anyone help my hoover washing machine modal hnl662 nextra keeps stopping mid cycle and the time delay light keeps coming on, on it own.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem as above. I've tried emptying and cleaning the filter but it's still the same. Now I can't get the door open.

Will scrap the thing, it's only just over 12 months old. I'd never buy a Hoover washing machine again.

Posted on Jul 25, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, had same problem the filter was blocked again. It needs to be regurly cleaned out.

Posted on Jun 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A HOOVER NEXTRA HNL662 WASHING MACHINE THE BELT KEEPS COMING OFF AND MAKES A NOISE WHEN SPINNING


Is the drive belt worn or cracked? Look for it to be quite snug when it's on it's sprockets and ensure there are no cracks or wear marks on it.
Replace it if you need to by putting a new one on. I do not think there is a tensioner on that drive.

Apr 18, 2011 | Washing Machines

2 Answers

Hi my Hoover Nextra 6 (HNL7146) is stopping mid cycle and the start light and delay start light are flashing 3 times every minute or so and the door will not open and door locked light remains illuminated....


the lights indicated a blockade, remove the front panel at the bottom to reveal a drain plug, the blockage is most likely at the back of the drain plug as the drain motor impeler sits directly behind the plug.

Oct 31, 2010 | Hoover Washing Machines

1 Answer

The start delay flashes in the middle of a cycle on a hoover washer dryer nextra 6 . it drains but doesn't spin


Program error due to maybe a delay in the fill and drain cycle, Get the inlet and outlet valves cleaned( drain should be quick)
Now if during the cycle the program is cutting off voltage to the motor, then the control board can be faulty.
Check if the drive is having connection fault to stop the motor voltage.

Sep 14, 2010 | Washing Machines

1 Answer

Hoover HNL 662. 'Delay start' light comes on and stops machine


my hoover nextra hnl 662 want wash or spin and the delay staart light flashes 5 times please help iv only had the machine a year and had nothing but trouble with it wouldnt recomend one of these washing machines to anyone jakki

Feb 16, 2010 | Hoover Nextra HNL 3166 Z Front Load Washer

1 Answer

How do I set the washing machine to spin only on a Hoover Nextra HNL662?


Adjust the timer to the end of any cycle. The pressure switch will recognize the water presence, and drain before spinning.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 05, 2009 | Washing Machines

3 Answers

Hoover HNL7166 'Start Delay' light flashing


Hoover (Nextra series) washing machines

The 'Start' & 'Pause' LED's will flash together to indicate the error code. You have to count the flashes within each 15 second period to get that error code. The start and the pause LED's will flash together at 1Hz (i.e 1 flash per second) within that 15 second time frame, then will continue and show again within another 15secs and so on.

1 Flash = Interlock fault
2 Flashes = Fill time-out
3 flashes = Drain time-out
4 flashes = Overfill fault presure pipe blocked
5 flashes = NTC error
6 flashes = faulty control board
7 flashes = Motor jammed
8 flashes = Tacho fault
9 flashes = Motor triac on module board
10 flashes = Prog Selector or wiring fault

Jul 27, 2009 | Washing Machines

2 Answers

My washing machine is not finishing a cycle and is not pumping out the water. It will start a cycle, but then it will stop half way through, and the "delay/start" button will flash red. Please help


i had same issue turned out pipe was blocked and washing machine gave up trying to get rid of water, so would stop, cleaned filter, uncloged drainig pipe and was good to go

May 12, 2009 | Hoover Nextra HNF 3157 Front Load Washer

Not finding what you are looking for?
Hoover Nextra HNL 3166 Z Front Load Washer Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

shaun taylor

Level 3 Expert

1525 Answers

Johnny Ramirez
Johnny Ramirez

Level 2 Expert

116 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...