Question about Office Equipment & Supplies

2 Answers

EpsonStylus CX7800 After chaging the ink jet the printer will not print

Posted by on

  • Anonymous Mar 10, 2008

    Put new Black ink cartridge in machine and now it will not print. Paper does advance thru printer but no printing on page

  • cultivatedga Aug 04, 2008

    installed new black ink. printer would not print. got "general error" to foreign object from inside printer-found some grey plastic pieces that look like they broke off from inside printer. ink carriage does not move....

    can't print.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just changed all the ink , and it won't print. I have tried cleaning the head a few times, but still no print. It did make some black marks but no print. I tried copying some black print but still nothing. Hope you can tell me something . Thanks Randall

Posted on Mar 08, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

First disconnect the printer from the computer

then powercycle the unit and observe if it is recognizing the inks

if u get the red ink lights on, try re-seating the inks

if that doesnt work, contact manufacturer regarding the inks

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer acts like it is printing and there is ink in the printer but pages are coming out blank


The ink-jets that SHOULD be spraying the ink onto the paper are clogged.

Run a few "print-head-cleaning" cycles, to try to unclog the ink-jets.

Jul 25, 2011 | Office Equipment & Supplies

Tip

Keep your ink-jet printer printing


Print head or ink cartidge clogged? Prevent this common problem. If you don't use your ink-jet on a regular basis, opting to use a laser for faster printing and sharper text, pick a day of the week (anyday) and make an entry into whichever calendar application you use to send a recurring reminder to print a test page from your ink-jet. Printing at least once a week will reduce the possibility that the cartridge or print head will clog with dry ink.

on Jun 13, 2010 | Office Equipment & Supplies

1 Answer

My printer ink is full and it just printing in black and yellow


The ink leaves the ink-cartridge, and should flow through the ink-jets to be sprayed onto the paper.
If some of the ink-jets are clogged (blue, red) and some of the ink-jets are fine (black, yellow),
then you need to run a few "print-head-cleaning" cycles, to try to unclog those ink-jets.

Jul 19, 2011 | Office Equipment & Supplies

2 Answers

Brother MFC-290c printer does not print black anymore. Test print page color ok but not black printing. What is the problem?


The problem is either:

* out of BLACK ink -- replace the ink-cartridge

* clogged ink-jets -- the ink is not spraying onto the paper, so run a few print-head-cleaning cycles

* dead electronics -- not triggering the jets to spray ink, so replace the printer

Feb 20, 2011 | Brother MFC-290C Multifunction Color...

1 Answer

We installed our new computer and printer..however the printer is not printing out anything. Its working..but no print on the paper. We took the tape off the cartridges. Help!!


Use the HP Printing Assistant software to run a few "print-head-cleaning-cycles",
to s(t)uck ink from the ink-cartridges into the ink-jets, and to unclog any of the ink-jets
that should be shooting the ink onto the paper.

Or, since it is a NEW printer, exercise the WARRANTY to get it repaired/replaced, at no cost to you.

Jan 10, 2011 | HP Photosmart Premium C309g multifunction...

1 Answer

Color ink cartridge show a full ink supply, but it won't print color.


It's possible that the ink-jets that spray the colour ink onto the paper have become clogged. Run the printer software, and select a "print-head-cleaning-cycle", to try to unclog those jets.

Oct 17, 2010 | Dell Inkjet 720 Printer

2 Answers

Printer does not print in color but only prints in


Run a "print-head-cleaning-cycle" -- the ink inside the cartridges is not getting through the ink-jets, and is not reaching the paper.

Either that, or the electronics inside the ink-jets are malfunctioning, i.e., not telling the ink-jets to shoot the ink out.

Jul 21, 2010 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Black ink will not print text


maybe the ink jet cartridge is depleted. This is common on all ink jet printers.
Or, the ink jet cartridge has tape on the head.

Jul 21, 2010 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

All of a sudden it will not print but as soon as u turn the printer on it prints like a test page


may be you chaged the catridge.
It is not the test page it is alignment test page just put the printed alignment test page paper on scanner glass and press the scan button to complete the process. It is alignment process which is printer is doing for self testing after installing new cartridge. Just finish the process.
Hope this helps. Please rate my response.
Thanks.
Have a good day.


Mar 18, 2010 | HP PSC 1510 All-In-One InkJet Printer

2 Answers

Service error 5600 appeared when the printer stop


Dear budg,
Error code 5600 in S200 is No Print head Error indicator. In this case, the print head of the printer is faulty so that the printer cannot detect the print head. About the print out, please check if there is enough ink in ink tank to print. If there is enough ink to print, means this bad print out caused by the faulty print head. It seems that you to replace the print head.
Regards,

Dec 02, 2008 | Canon S200X Ink-Jet InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8080 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...