Question about Samsung WEP170 Wireless Headset

2 Answers

WEP170 headset Although the above is Samsung and  the headset is also Samsung -my mobile doesn't see it.....My bluetooth finds everything and everybody else..... so why not the headset???

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers
Re: WEP170 headset

I have found out, that you need to set the wep170 into a pairing mode Blue light is on all the time (not blinking). When switching on you have to hold the button as long as you get there. This part is missing in the czech manual.I do not kno how it is in other languages. Once you are there everything works normaly. The code is 0000. Try it.

Posted on Apr 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: WEP170 headset

I found out that not all Samsung bluetooth phones are compatible with this WEP 170 Bluetooth handset. I called my carrier (AT & T) and they informed me that my mobile phone (also a Samsung SGH 700 series) might not work. I'd advise checking with your carrier to see if they can help clear up any problems.

Posted on Dec 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to get my pass code back on my ipad

I assume you mean the code for the headset?
The default is "0000" when pairing.

Ensure the headset is off (see Turning headset on/off section).
2. Press and hold Power until you see a solid blue light (approximately 8
seconds), then release* (see Fig. 3).
3. Set your Bluetooth phone to "discover" the headset by following your phone's
instruction guide. Typically, the steps involve going to a "setup", "connect", or
"Bluetooth" menu on your phone and then selecting the option to "discover" a
Bluetooth device.
4. Your phone will find the "Samsung WEP170" headset and ask if you want to pair with
it. Confirm this by pressing "yes" or "ok".
5. Enter passkey or PIN4 = 0000 (4 zeros), then press "yes" or "ok".

Manual link

Jun 07, 2014 | Samsung WEP170 Wireless Headset

1 Answer

I bought a samsung bluetooth wep-170 for my samsung sgh t4 01g phone and i enabled bluetooth but it says no bluetooth device found the guy said it would work can u please help me

You need to put the headset into pairing mode for the phone to be able to find it. There are some instructions on this page:

Please follow these, hopefully they will help solve your problem

Oct 13, 2010 | Samsung WEP170 Wireless Headset

1 Answer


The VEEERY tiny print on my charger reads:

Nov 25, 2009 | Samsung WEP170 Wireless Headset

2 Answers

I don't know how to pair it to my mobile phone..need to put the headset inot pairing mode??

Yes. To put your headset into pairing mode:
1.) Make sure your headset is off.
2.) Hold the Power Button on until the blue light stays lit (about 8 seconds). This puts it into pairing mode.

Nov 05, 2009 | Samsung WEP170 Wireless Headset

1 Answer

How do i reset my head set to pair it with my new samsung phone

You don't have to reset it, all you have to do is:
1.) Make sure the headset is off.
2.) Push and hold the 'On' button until you see the exterior light stay blue (about 8 seconds). This puts your headset into discovery mode.
3.) On your mobile, go to the bluetooth menu and set it to search for Bluetooth devices.
4.) When it finds your headset, tell it to pair. If it asks for a passcode use four zeros "0000".

Oct 26, 2009 | Samsung WEP170 Wireless Headset

2 Answers

Cannot find manual,need passkey for WEP170

The manual can be found here

Jul 12, 2009 | Samsung WEP170 Wireless Headset

1 Answer


Hey dude,
U dont need to search for the pass keycode. It is the key u put on. Put on the same code on bluetooth which u have put in ur mobile/PS3.
moz-screenshot-4.jpgSend me a feedback. And Rate me if my solution is helpful !

May 11, 2008 | Samsung WEP170 Wireless Headset

2 Answers

Passcode for Samsung WEP170

must start with headset turned off.
1) turn on headset and keep your finger pressed until the blue light stays on
2) now let your phone search for the device. when it does select it
3) the pin is 0,0,0,0
4) then it should be matched

Mar 25, 2008 | Samsung WEP170 Wireless Headset

1 Answer

Soft, rubber like piece cover speaker on Samsung WEP170 Bluetooth

I bought a pair of Sony headphones for my MP3 player, they came with three sets of rubber covers for the bud part of the head phone.
I have the WEP 170 also but didn't like how it fit in my ear, so I took one of the Sony bud cusions and replaced it with the one on the WEP, works great and even helps to cancel out noise.

Hope this helps

Jan 23, 2008 | Samsung WEP170 Wireless Headset

Not finding what you are looking for?
Samsung WEP170 Wireless Headset Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Headsets Experts


Level 3 Expert

94039 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

150 Answers

Are you a Samsung Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides