Question about Coffee Makers & Espresso Machines

2 Answers

Brewing problems. Purchased September 2007. The brew station will brew about 2 cups and stop. Turning off & on will help to restart the brewing and it will stop again. I have cleaned the brew station monthly.

Posted by on

  • Anonymous Mar 16, 2008

    I find that the first cup in the morning flows really well but the second cup just drips through even though I thoroughly clean and rinse the coffee holder between cups. I have tried different coffees but this does not appear to make any difference. Any Ideas?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers

The type of coffee powder you are using maybe causing the drip nozzle to run slower than rated, which is causing the thermal overload heatup and open. When it cools down, you can get another 2 cups to make.

Posted on Dec 30, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 146 Answers

You have a thermal fuse that could be giving you a problem. Some of them you can disassemble some you can't If you can disassemble and check the thermal fuse.

Posted on Dec 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gd morn. My CBC5200PC will brew only a partial amount of the water. This morning it stopped at 6 cups, then I coaxed it by turning it off and on,, but would only drop a cup of water at a time


Brewing Problems

Another common problem that can occur with the Cuisinart coffee maker is it will stop brewing, even when there is water ready to be transformed into coffee. The machine still turns on and works like it should, but does not continue brewing an entire pot of coffee, and acts like it has finished brewing even when there is still water sitting in the bin. This type of problem is pretty common among various coffee makers, and usually occurs when there is a problem inside the machine.

One of the best ways to fix this problem is by flushing the coffee maker out with a vinegar solution, which can be made with equal parts of vinegar and water. It should be poured in the same place as the water that is ready to be brewed, and will help to clear out the machine and make it ready to start brewing again. This problem is usually caused by calcium building up within the machine, and the vinegar helps to clear out any blockage to help it start running smoothly again. (From. Google Search)

May 17, 2017 | Coffee Makers & Espresso Machines

3 Answers

Tassimo red light stays on ran descaling disc twice


After many months, I solved the problem of the red light staying on the Tassimo Coffee Maker. Use these easy steps.
1. Fill a 2 cup measuring cup with hot water.
2. Mix in descaler.
3. Pour in the empty water tank.
4. Put the yellow cleaning disk in the chamber and close chamber. Put the two cup measuring cup under the spout.
5. Push and hold the brew button for about 3 seconds (until the red and green light flash.
6. Now don't touch the machine. It will do it's thing for about 20 minutes. (Don't be impatient and start to push buttons, just leave it)
7. When it finishes it's cycle. The red light will turn off. Then clean the water tank and put fresh water and run clean water through the brewing cycle 4 times. Your machine is now ready for use.

Sep 23, 2010 | Bosch Tassimo TAS4511UC Coffee Maker

2 Answers

MR COFFEE FTX49. Brewing starts, then stops


Mine just started to do the exact same thing. So I decided to clean it using the "Clean" program and just water. I put the brewer through the cleaning program 3 times - each time it would brew water from 12 cups to 8 cups, I'd tap the brewer on the countertop, it would brew from 8 cups to 4 cups, tap it again, and it would brew the remaining cups. So, I called the Mr. Coffee help line (800-672-6333). The most-likely problem is that the hose is no longer attached in the water reservoir. The help line suggested that I take it in to a service center. I live in Urbana, IL and the closest service center is in Oak Lawn, IL - 2 hours away from me!!
Here is my solution:
1) Buy another coffee brewer.
or
2) Smash your current Mr. Coffee brewer into a million pieces (this relieves stress) and go buy another coffee brewer (probably stay away from Mr. Coffee products).
Hope this helps.
Frustrated in Urbana

Oct 11, 2009 | Mr. Coffee 12-Cup Programmable Coffeemaker

1 Answer

Unit will not brew when pod is inserted; works w/o pod however.


This may be one of two issues:
1. The pump is malfunctioning which can cause the internal reservior to not completely fill which causes issues during brewing. My unit dribbled random amounts of water instead of brewing for about a week before the pump died completely.
2. The puncture seal isn't in the right position. Open the Keurig fully so you can see the sharp puncture pin. Very Carefully push the black rubber gasket around it all the way up. Then pull it back down about 1/16". Brew a cup, if the problem continues, try sliding the gasket further down by increments of 1/32".

May 29, 2009 | Keurig Ultra In Home Single Cup Brewer...

1 Answer

Coffeemaker will not brew a full pot


Try cleaning it with pure vinegar. 3-4 times just keep running it through the machine.

Jan 12, 2009 | GE 106591 Coffee Maker

3 Answers

Cuisinart DCC2000 quits brewing after 1or 2 cups


Finally, I got my coffee pot to run through without stopping several times. To fix it I had to run vinegar through eight times! Never before has it taken so many cycles to clean out a pot. It is still spluttering a bit so today I am going to get more vinegar or maybe even CLR and run it through a few more times.

Nov 18, 2008 | Cuisinart Grind and Brew 10 Cup Coffee...

1 Answer

Cuisinart DCC2000 quits brewing after 1or 2 cups


I have the same problem with the exact same coffee maker I have tried pushing the 1-4 cups button. That worked for a couple weeks, now it is back to only brewing half the water in reservoir whether I push the 1-4 button or not. It is very annoying.

Nov 14, 2008 | Cuisinart DCC-1200 Coffee Maker

1 Answer

Partial Brew


My experience has been that an aggressive cleaning, by "brewing" 6 cups of straight (undiluted) vinegar will eliminate this problem.

Jun 24, 2008 | Cuisinart DGB-600 Coffee Maker

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

Marvin
Marvin

Level 3 Expert

82322 Answers

Kolbrun...

Level 3 Expert

1215 Answers

Ross Keen

Level 3 Expert

1324 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...