Question about Wharfedale DVD-M3 DVD Player

1 Answer

Setting the clock on a Wharfedale DVDRHD400F

When the initial set up ran for the DVD recorder it set the correct time and, I assume, the correct date.
However, I had problems with the display and went through various settings until I solved the display problem.
Unfortunately, during the process, which included disconnecting the power, the clock was reset, starting at midnight and 1st January. There appears to be no way to access the clock.
How do I get the recorder to display the correct date/time?

Mark

Posted by on

  • msladsy Dec 21, 2007

    This solution may work for other Wharfedale DVD recorders as well as the DVDRHD400F.

    Use your Setup button to acces the 'Setup' menu.

    Choose the 'Preferences' menu.

    Choose 'Factory Defaults' and click on 'OK'.

    The recorder will restore the factory defaults and the first screen it takes you too is the 'Initial Setup' screen where it asks you to enter the correct date and time.



    Mark

  • msladsy Dec 22, 2007

    May work on similar dvd recorders. Would help if Wharfedale included this in their users manual.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 147 Answers

Try scanning for channels. It may well download time and date automatically.

Posted on Sep 13, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: wharfedale dvdrhd400f

have the same problem. DVD's play back with sound OK, but the tuner has no sound. any advice?

Posted on Jul 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set the time on dmr eh59


Automatic clock setting is done if you initially accept to use the guide plus system (should do). Only if for some reason it does not work, you can set the clock manually following these steps Clock Usually, the unit's setup function automatically adjusts the
clock to correct time. Under some reception conditions, however,
the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
1 Press [3, 4] to select "Off" of "Automatic" and press
[OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour,Minute,Second,Day,Month.Year

3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
"Automatic" in the Clock setting menu is set to "On", the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.








Sep 25, 2012 | Panasonic DMR-EH59 250GB Multi Zone Region...

1 Answer

I HAVE A PANASONIC DVD,VHS RECORDER MODEL #DMR-EZ48V.WHEN TRANSFER A VHS CASSETTE TO A DVD THE THUMNAILS ON THE DVD HAVE THE DATE OF 1/1/2000. HOW CAN I PUT THE ACTUAL DATE OF THE RECORDINGS ON EACH OF THE...


Try setting the clock on the remote press [FUNCTIONS] go to SETUP menu - locate the CLOCK option (it should be under 'OTHERS' in the setup) and set the current time, press [ENTER/OK] to store if necessary, then press [RETURN] to exit the setup. Once clock is set correctly, future DVD thumbnails will show the actual date/time of recording in this (and similar) model combo units. If auto clock setting is not possible, set it manually as above.

I assume in spite of the wrong date/time, your DVD recordings have been successful. Incorrect clock and date setting usually only affects timer recording for VHS.

If you have lost or misplaced your original owner's manual, you can download a free pdf version (for Region 1 model) from:

http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/DVD-Recorders/model.DMR-EZ48VK

or, if you live outside USA, download the 'Australia/NZ' pdf version of the manual (for Region 4 model) from:

http://www.panasonic.com.au/Products/DVD+and+Blu-ray/DVD+-+Players+and+Recorders/DMR-EZ48V/Downloads

either one of these will provide you a full copy of the original user guide/setup including clock.

All free. Hope these suggestions help.

May 02, 2011 | Panasonic Televison & Video

1 Answer

My dvd player show set up how it works from this problem


I have no remote control of WHARFEDALE / Model - DVDRHD400F /& it shows "setup" error How can i operate it....

Feb 25, 2011 | Wharfedale DVD-M3 DVD Player

1 Answer

RCA model DRC8335 Loosing the date and time


That will be a problem from the text side of the broadcast, the clock is set from the text transmission, ( in other words a problem from the transmitter ) possibly due to digital switchover or work on the transmitters. One possible solution would be to turn off auto clock setting, and/or auto summer time adjustment.

May 16, 2009 | RCA DRC8295 DVD Recorder/VCR Combo

1 Answer

Setting the clock on the dvd recorder


Follow this sequence on the remote control:

Press FUNCTIONS/To Others/Setup/Others/Clock to access the clock setting mode. There, you will have the choice of Auto or Manual. Take your pick and away you go!

Apr 02, 2009 | Panasonic DMRES15 DVD Recorder

1 Answer

Changing the time


Press "HOME MENU" select "INITIAL SETUP" and advance forward to "CLOCK SETTING'.

Enter your time manually OR

Select * "AUTO"

*Some stations embed the proper time within the transmitted signal. Your Pioneer will calibrate it's clock according to your local studio time.

I found a full users manual online and I looked for a place to post it here, but I found no place to do so. Sorry.

Hope this helps!

Apr 22, 2008 | Pioneer DVR-540HX DVD Recorder/HDD...

2 Answers

Wharfedale dvdrhd400 problems


Change the Scart setting (in the setup menu) from the default setting (RGB) to the other available setting (CVSC?).
I have a problem with my box restting the clock on a random basis, making it impossible to set a timer to record anything - let us know if you get the same problem via this site!

Jan 03, 2008 | Wharfedale DVD-M3 DVD Player

3 Answers

Error code


I had the same problem - turn off at the wall and on again fixed it.

Dec 07, 2007 | Wharfedale DVD-M3 DVD Player

1 Answer

Wharfedale dvd 400f


I had this problem, the only way I could reset it is to, set restore to factory setting, I did this and have now lost output. I have never had so much trouble setting up a dvd.

Glen

Oct 28, 2007 | Wharfedale DVD-M3 DVD Player

Not finding what you are looking for?
Wharfedale DVD-M3 DVD Player Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wharfedale Televison & Video Experts

Marvin
Marvin

Level 3 Expert

82208 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Wharfedale Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...