Question about NorStar BayStack 425-24T (AL2012E41) 24x10/100 Mbps and 2x1000 Mbps Networking Switch

Open Question

I have no idea on ow to enable port 26 in the Nortel 425 switch

In the manuals say that it is inactive while the stack ports are active, but thereĀ“sno more information, Who can help me?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 62 Answers

SOURCE: gbic

Hi from the command line interface you will need to login and then type enable (enter) configure (enter), interface fast ethernet all (enter), no shutdown port (port #). Here is a link to the CLI manual if you need more help: http://www116.nortel.com/docs/bvdoc/baystack/doc_pdf/217152-A_CLI_Guide_for_Ethernet_Switch_325-425_Release_3.5.pdf Let me know how it goes or if you need more help. Regards

Posted on Sep 28, 2007

Ad
  • 1 Answer

SOURCE: Baystack 425-24T Port 26 disabled

I did what you sugget. Went to CLI and did :

conf t

stacking-mode disable
boot

After the reboot, port 26 is enabled and working. Thanks

Posted on Jul 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Messaging is inactive on all lines after push functions button and enter 981


Hi. Inactive feature often means that there's a problem with your connection to the call pilot. Do you have lights on your call pilot? Did you assign a mailbox to the extension you're working on? Did you remember to connect the call pilot to a station port?

Jun 11, 2015 | Nortel T7316E 2-Line Corded Phone

1 Answer

Nortel 425 switch problem all leds are contentsly blinking


there might be looping issue, please unplug all the cables from the switch and then put one by one cable in each switch port and make sure that both ends or the cable should not plug to the swithc... also check in your network there wont be virus infected pc or device..

Dec 14, 2011 | Nortel Networks 425-48T Managed Ethernet...

2 Answers

How can I activate PoE port on avaya2526T switch?


Try this: http://www.retrevo.com/support/Nortel-2526T-PWR-Switches-manual/id/8084dj990/t/2/

Good luck!

Jun 18, 2011 | Nortel 2526T-PWR Ethernet Routing Switch...

1 Answer

Need cli entry for factory default reset.. adding old switch from another site to new stack and want it clean on factory defaults


Follow these steps:
  1. Connect to the console port of the switch (9600,8,N,1)
  2. Reboot the switch.
  3. When the first line of the diagnostics tests is displayed, press CTRL-C. The system then displays a menu.
  4. Select option "i" to factory default the switch.
  5. Select option "a" to run the agent code.
Upon boot up, the switch will be in a factory default configuration.

Feb 24, 2011 | Nortel Networks Nortel Ethernet Routing...

1 Answer

Confi stack on nortel switch 2526


Hi friend i want help can you give me the reply. i have 4 nortel 2550T-24 port switch but i don't know how to active stack config.

Sep 27, 2010 | Nortel 2526T-PWR Ethernet Routing Switch...

1 Answer

Hi Team We replaced our existing Nortel Switches with Nortel 2550T 48 Port Switches and since then our VoIP phones are not getting IP from DHCP. Putting static IP is working. Can you please guide me...


As you described it there shouldnt be any problems with your configuration, there should be auto ip conf. enabled so VoIP phones should accept 1st IP range automatically. If that doesnt help contact your operators. Thats all. Good luck!

Please rate my solution! :)
Aleksandar Adzic

Aug 23, 2010 | Nortel 2550T 48-Port Ethernet Switch...

2 Answers

I have nortel phone ip 2002 i want use for my own carrier i need to reset


1. Reset the phone by disconnecting and re-connecting power.
2. When the Nortel logo appears, press each of the four soft keys in sequence.
3. If no other configuration changes are required, press OK repeatedly until the “PC
Port? 1-ON 0-0FF
” option appears.
4. Press 1 to enable the PC Port or 0 to disable the PC Port.
5. Select OK to confirm the change.
6. Restart the IP Phone.
When the IP Phone is restarted, the firmware sets the PC Port status accordingly

Apr 20, 2008 | Nortel 1140E

1 Answer

Baystack 425-24T Port 26 disabled


I did what you sugget. Went to CLI and did :

conf t

stacking-mode disable
boot

After the reboot, port 26 is enabled and working. Thanks

Apr 07, 2008 | NorStar BayStack 425-24T (AL2012E41)...

1 Answer

Gbic


Hi from the command line interface you will need to login and then type enable (enter) configure (enter), interface fast ethernet all (enter), no shutdown port (port #). Here is a link to the CLI manual if you need more help: http://www116.nortel.com/docs/bvdoc/baystack/doc_pdf/217152-A_CLI_Guide_for_Ethernet_Switch_325-425_Release_3.5.pdf Let me know how it goes or if you need more help. Regards

Sep 25, 2007 | NorStar BayStack 425-24T (AL2012E41)...

Not finding what you are looking for?
NorStar BayStack 425-24T (AL2012E41) 24x10/100 Mbps and 2x1000 Mbps Networking Switch Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Computers & Internet Experts

Brad Brown

Level 3 Expert

15950 Answers

Computer Links

Level 3 Expert

2385 Answers

 Brian Main
Brian Main

Level 3 Expert

464 Answers

Are you a NorStar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...