Question about Computers & Internet

2 Answers

Incompatible display adapter has been disabled

I have a Mercury PI865GM motherboard and i have a GeForce FX5200 graphics card. I recently installed Windows Vista Ultimate on my system but the motherboard driver CD is not compatible for Vista. I installed most of the drivers through the internet but i could'nt find the display drivers. Now Vista gives me this error message..

At least one display adapter on the system has been disabled because its driver is not compatible with the driver for the VGA adapter.
Intel(R) 82865G Graphics Controller (Microsoft Corporation - XDDM).

Please help me solve this problem...

Posted by on

  • 1 more comment 
  • krazyazndude Nov 02, 2008

    My computer came with vista and a built in NVIDIA GeForce 6150 LE. I recently bought a VisionTek Radeon X1300. I uninstalled the NVIDIA software. I took out the card and put in the Radeon. I then installed the driver software from the Radeon CD. I restarted the computer. Then an error message comes up saying that one of the display drivers has been disabled cause the VGA adapter is incompatible, with the current software. Please help

  • Anonymous Jan 17, 2009

    my device is not working

  • Anonymous Jan 31, 2009

    Same prob as him but i'll try to do wut u did :o

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

انا عايز تعريف كارت فيجا mercury p4vm800m via

Posted on Oct 14, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 44 Answers

Ah so you have 2 video adapters in the computer:

1) The one built into the motherboard (and the one vista is complaining about)
2) Your add-in FX-5200

So I assume you have the 5200 drivers already (they shoudl be built into Vista), but just in case: http://www.nvidia.com/object/winvista_x86_96.85_2.html

Now for the on board intel video, I would try these: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2880&DwnldID=14962&strOSs=163&OSFullName=Windows%20Vista*&lang=eng

Posted on Dec 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Download


try with new driver : http://driverscollection.com/?H=FX5200-TD128&By=MSI%20(Microstar)

but before you update with new driver,probably you must update/re-installed Chipset driver of your Motherboard.

Mar 01, 2011 | MSI FX5200-TD128LF GeForce FX5200, (128...

3 Answers

I have a GeFORCE FX 5200 PCI card, and onboard graphics. I had to restore my system, and cannot find the user manual. If it was available online, I'd follow the steps myself, but I'll settle for a quick...


Hi.

You do not necessarily need to disable the built in graphic adapter, the computer can manage two different adapters.
The nVidia should show picture with standard VGA definition (800x600 only) if simply connected to the AGP or PCI slot even if drivers are not installed, and even if built in GPU is not disabled.
If there is no picture, check installation in slot, check that card is not disabled in BIOS, check video cable is well connected, and if nothing works, test the video adapter on different PC, the card may be faulty.

Here the manuals:

Quick Guide to NVIDIA GeForce Desktop Graphics Processors

GeForce FX 5200/5500/5600/5700/5900 Series

GeForce FX 5200/FX 5600/FX 5900 Series

nVidia GeForce FX5200 Gigabyte GV-N52128DS manual - GeForce FX5200 ...

Sep 30, 2010 | Nvidia GeForce FX 5200 Video Card Graphic

1 Answer

I have a Dell Vostro 400 and two video cards. Only one card will work and it is an Nvidia GeForce FX 5200.The other one is an ATI Radeon HD 2400 PRO. These are the specs from the two graphics cards:...


you cant join two different platform vga cards. simply because they have their own platform and have separate drivers, so they conflict each other thus causing one of them shut off or disable..

Jun 01, 2010 | XFX NVIDIA GeForce FX5200 Graphic Card

1 Answer

Having problems installing a Geforce fx5500 on my dell deminsion


sounds like yo had the same Problems that I had with my 5200 geforce The install did not go well. what was happening was the direct x was binding to the old mother board graphics system and not the new card . to make it rebind just change the refresh rate in the nvidia icon in your task bar . disable the display adapter from device manager for the motherboard graphics .put the card in the slot change the monitor cord boot up check you direct x by typing in run dxdiag and test directx to be sure it is running with your card you can also see that from the about nvidia you must have the driver for the card installed to do all this.. hope I helped  install the driver first then disable download latest drivers here http://www.nvidia.com/Download/index5.aspx?lang=en-us 

Feb 07, 2010 | XFX GeForce FX 5500 Graphic Card

1 Answer

Inno3D Geforce 256MB 128bit Video card


sounds like yo had the same Problems that I had with my 5200 geforce The install did not go well. what was happening was the direct x was binding to the old mother board graphics system and not the new card . to make it rebind just change the refresh rate in the nvidia icon in your task bar . disable the display adapter from device manager for the motherboard graphics .put the card in the slot change the monitor cord boot up check you direct x by typing in run dxdiag and test directx to be sure it is running with your card you can also see that from the about nvidia you must have the driver for the card installed to do all this.. hope I helped install the driver first then disable download latest drivers here http://www.nvidia.com/Download/index5.aspx?lang=en-us 

Jan 15, 2010 | XFX GeForce FX 5500 Graphic Card

1 Answer

Hi, my computer won't boot any more after inserting and even removing a new nvidia geforece fx 5200 video card into my mercury mv900m motherboard's pciexp slot.


you might have not installed the drivers for it and then just restarted the computer
try to take your graphics card out then restart your computer and check if it works

Jan 13, 2010 | XFX NVIDIA GeForce FX5200 Graphic Card

1 Answer

Error code 43 "Incompatible display adapter has been disabled"


I have got Dell comp with same n-vidia 8800GT suddenly after installing adobe's update only 1 monitor functions and slowly.
Any reinstaling and updating drivers that i ve tried did not help.

May 07, 2009 | PNY XLR8 NVIDIA GeForce 8800 GT 512MB...

1 Answer

System not booting, after installation


Update the driver by using xp , not the installer.
 Start . Right click,MY computer,click properties,click hardware,click device manager, click display adapters, click Update driver.

Mar 05, 2009 | XFX GeForce FX 5200, Graphic Card

1 Answer

Proplem in Gigabyte GeForce FX5200, AGP Graphic Card in vista


Not quiet sure what you mean? The fx5200 will run vista and is aero capable as its the 1st dx9 card but it may struggle a bit. Could you clarify what you want to know? :)

Dec 29, 2007 | Gigabyte GeForce FX5200, (128 MB) AGP...

2 Answers

What graphics card this motherboard will support


Gigabyte did not put a special graphics slot (AGP, PCIe etc) on this corporate series board. It has good internal graphics support. If you would like to run two monitors, it appears that one choice is the CHAINTECH P-FX20 256MB Geforce FX5200 256MB 128-bit DDR PCI Video Card, based upon user reviews at NewEgg. You may need help getting both graphics adapters to operate together. Typically, there is a jumper on the card that disables "Primary VGA" mode. Your OS should boot using the on-board adapter and then you can tell the OS that it should "Extend the Desktop" to the second (PCI) adapter. Your results may vary.

May 12, 2007 | Gigabyte GA-8I865GVMK Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

2,649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...