Question about KitchenAid KCMS1555RSS Stainless Steel Microwave Oven

1 Answer

Convection oven starts preheat then shuts off

I have a Sharp R-9H81 microwave/convection oven, in convection mode it will begin to preheat then cycles off , I am guessing it is a faulty sensor???

Posted by on

  • rob7129 Oct 04, 2009

    Yes it heats up and no there are no fault codes.

  • rob7129 Oct 05, 2009

    Did some further investigation and found an open circuit thermistor.
    Thanks


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,714 Answers

Are there any fault codes? Is it heating at all?

Posted on Oct 03, 2009

  • Craig Butler
    Craig Butler Oct 04, 2009

    It's the Thermistor, or maybe in your case, thermostat. It's not working and will need to be changed.

  • Craig Butler
    Craig Butler Oct 05, 2009

    Very good! I was hoping that was all it needed! Thanks and could you please close the question and rate my help? Thanks again. Craig

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dimension4's convection oven often starts to make grinding noises when it preheats.


From the description it is the turnable motor, eventually it will need to be replaced down the road.

Mar 22, 2012 | Microwave Ovens

1 Answer

The microwave shuts off after 59 seconds. You can push the START button and it will start again but shut off after 59 seconds. The convection oven component does the same thing.


This is a problem in one of the damper-related components, either the switch or motor or the damper door may be binding.

The damper is a door inside that opens or closes depending on cooking mode. If the controller senses that the door is not in the right position, it will shut down the cook cycle.

Sharp models stop after 59 seconds.

See the attached sample drawing for a typical damper assembly.

We have the applicable service manuals for these models and have uploaded them to our site here, here and here to help you.

If a switch is all you need, we offer a universal type for only $5 postpaid which you can order here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 16, 2010 | Sharp R-1874 Convection/Microwave Oven

1 Answer

Sharp model R-1871 shuts off every 59 seconds


This is a problem in one of the damper-related components, either the switch or motor or the damper door may be binding.

The damper is a door inside that opens or closes depending on cooking mode. If the controller senses that the door is not in the right position, it will shut down the cook cycle.

Sharp models stop after 59 seconds.

See the attached sample drawing for a typical damper assembly.

We have the applicable service manuals for these models and have uploaded it to our site here and here to help you.

If a switch is all you need, we offer a universal type for only $5 postpaid which you can order here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

b27054b.jpg

Aug 30, 2009 | Sharp R-1871 Convection Microwave Oven

1 Answer

Sharp r96st stops at 1 sec and halts whilst preheating oven


This is a problem in one of the damper-related components, either the switch or motor or the damper door may be binding.

The damper is a door inside that opens or closes depending on cooking mode. If the controller senses that the door is not in the right position, it will shut down the cook cycle.

Sharp models stop after 59 seconds.

See the attached sample photo for a typical damper assembly.

Info on ordering Sharp UK parts / spares is here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

b27054b.jpg

Jan 29, 2009 | Sharp R-1480 Microwave Oven

1 Answer

Convection Preheat doesn't reach the Chosen Oven Temperature


I would first suspect the thermister (thermistor) or a low line voltage, weak control board relay etc.

But the service manuals will show you how to safely disassemble, test and repair the unit.

We have the service manuals for this model and have uploaded them to our site here and here to help you.

You will need the
free Acrobat Reader to view or print them in case you don't have it.

The best place to order parts for this brand is Encompass (formerly Tritronics). Or you can call them toll-free at 866-779-5835.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Jan 04, 2009 | Sharp R-1870 Convection/Microwave Oven

1 Answer

R-9h81 sharp microwave oven


I'm sorry, but the keypads for for Sharp R-9H-type models are no longer available.

Please don't kill the messenger, but unfortunately, once the oven becomes unusable it will have to be retired.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sep 06, 2008 | Sharp R-930AK Convection/Microwave Oven

1 Answer

Sharp Carousel Convection Microwave R-9H56 suddenly stops heating


at highvoltage section wiring may bae problem, check wiring and connectrors of magnetron and capacitor and transformer.

Dec 11, 2007 | Sharp R-510HW Microwave Oven

Not finding what you are looking for?
KitchenAid KCMS1555RSS Stainless Steel Microwave Oven Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Stu Ungar

Level 2 Expert

52 Answers

Darial Jr Lasaria
Darial Jr Lasaria

Level 3 Expert

378 Answers

Are you a KitchenAid Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...