Question about HP Photosmart C6280 Printer

2 Answers

Can you give me steps on how to connect to my computer

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 115 Answers

I am assuming that this printer can be connected via usb. Make sure your computer is on, then put in your software disc, it will automatically play. Click Install and follow the prompts. It will tell you when to plug in your printer (it should connect to the usb port in the back of the computer).

Posted on Oct 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Plug the printer into the computer via the usb port. There will be a pop up saying that a new hardware was detect, run the wizard and say i have disk, and insert the disk for the printer in the drive and follow the steps to the end of the wizard. Print a test paper to ensure accurate connection.

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello dear. Please, give the name of the software or the driver that will allow connect internet on my computer via my LG phone (my phone is connected to my computer via usb cable). Thanks.


Hi Youssouf,

Are you trying to use your 3g Data connection from your phone to give internet access to your computer?

If so this is called USB Tethering. you need to go into Settings -> Network -> Tethering.

If you give me the type of LG Phone you have I can provide you with a step by step process on how to do this.

Thanks,

Hunter Quinn
IBM Technician

Jul 15, 2014 | Cell Phones

1 Answer

I beleive my router may need to be configured to allow APPLE tV to communicate with my computer. I can access the router and download from internet with Apple TV. I cannot perform home sharing with...


NAT STRICT

Step 1 : Connect Router - Computer ( Wired )

Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of the internet explorer

Step 3 : The Default Password is admin

Step 4 : At the top Click Advanced

Step 5 : On the left Click Firewall Settings

Step 6 : Enable DMZ

Step 7 : give the IP Address of the Computer in it

Step 8 : Uncheck the option Enable SPI

Step 9 : Click Save Settings

Step 10 : Test the connection

let me know if this works

Regards
TOM

Dec 27, 2010 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

NAT issue with d link wbs2310...can't connect with anybody on xbox live...


NAT STRICT

Step 1 : Connect Router - Computer ( Wired )

Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of the internet explorer

Step 3 : The Default Password is admin

Step 4 : At the top Click Advanced

Step 5 : On the left Click Firewall Settings

Step 6 : Enable DMZ

Step 7 : give the IP Address of the Xbox/PS3/Wii in it

Step 8 : Uncheck the option Enable SPI

Step 9 : Click Save Settings

Step 10 : Test the connection

let me know if this works

Regards
TOM

Nov 07, 2010 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

How do i access the NAT settings for my D-Link DIR-655 Router. i believe the strict setting is affecting the WiFi i need to connect to the internet through my computer.


NAT STRICT

Step 1 : Connect Router - Computer ( Wired )

Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of the internet explorer

Step 3 : The Default Password is admin

Step 4 : At the top Click Advanced

Step 5 : On the left Click Firewall Settings

Step 6 : Enable DMZ

Step 7 : give the IP Address of the Xbox/PS3/Wii in it

Step 8 : Uncheck the option Enable SPI

Step 9 : Click Save Settings

Step 10 : Test the connection

let me know if this works

Regards
TOM

Oct 24, 2010 | D-Link DIR-655 Wireless Router

2 Answers

I have a d-link router, how do I configure a password protection so neighbors or others cannot access my info.


Is there any computer connected to the router ?
If not then you will need to connect the computer to the router.
Do not change any wireless settings on the router with the wireless computer.
you will need to connect the computer to the router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the router.
Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
Click Here for step by step instructions

May 10, 2010 | D-Link DIR-655 Wireless Router

1 Answer

Pl give step wise procedure to connect 6030 to internet via Dial


1. You need a means of connection from your cell phone to your computer or laptop (inferred,bluetooth or data cable), a dialup connection, your proxey settings

steps to connect internet with mobile phone to PC.

Step 1:Take your gprs enabled cell phone and connect it to your computer or laptop using either buletooth,infered or a usb cable.

Step 2:Create a dial up connection.Go into yor control panel,then into internet options.Then go to connections and add.Create a dial up connection and when it asks for a phone number type in *99#

Step 3:On your new dialup connection add the same proxy address you have on your gprs in your cell phone.

Step 4:Now on your cpanel there should be something called modem options here you must change the APN to whatever your APN is on yor gprs in your phone.

Step 5:Go to start menu and connect,then connect to your dial up (make sure your cell phone is connected to your computer or laptop)

Step 6:Start your browser (internet exploxer,opera etc) and start surfing the net.

Mar 09, 2010 | Nokia 6030 Cellular Phone

1 Answer

Have wireless broadband on home computer with Netgear dont have network key which I need to connect new laptop to wireless broadband Bt of no help and cannot give me a no fo Netgear either even though Bt...


You will need to check the wireless settings of the router .
Is there any computer connected to the router with the Ethernet cable?
If not then connect 1 computer to the router and open the router set up page. Once you open the router set up page, you will be able to find the wireless network key.
Use that password to connect to the wireless network

Click Here for step by step Instructions on how to find the network key

Dec 19, 2009 | NetGear DG834G Router

1 Answer

How to share internet connection on Windows Vista OS. I want to share internet connection between two Laptops using Windows Vista Operating system and the other using Windows XP. The Host computer is...


All right let's call your Vista computer A and your Xp computer B. First you have to bring the two computers into LAN. If you already did this, please skip the next eight steps.

Step 1: In Vista, before doing this you should enable Sharing and Discovery. You can do that by going to Control Panel -> Network and Sharing Center. Under the section ‘Sharing and Discovery, enable Network discovery, File Sharing, Public folder sharing and others if you want to. (See picture below)

Step 2: If your LAN card that is connecting to another computer is installed, it will be shown under Control Panel -> Network Connections.

Step 3: Right click that local area connection and click properties.

Step 4: Under the tab ‘Networking’, click the properties Internet Protocol Version 4 (TCP/IPv4).

Step 5: Click the radio button to ‘Use the following IP’ and give an IP address (For example, IP address: 192.168.0.1 and Subnet Mask: 255.255.255.0)

Step 6: Don’t give any other information, Click Ok and close everything.

Step 7: In computer B, which is the XP, make sure you enable the LAN card which is used to connect to computer ‘A’. Here you need not give any IP information as Computer ‘A’ will assign an IP address dynamically. If it’s not working make sure there are no IP assigned and change the properties to ‘Obtain an IP address automatically’.

Step 8: Test the connection by pinging. (You can do this by typing ping 192.168.0.1 or whichever is Compter ‘A’s IP in the comand prompt)

NOW your computers are connected. Now to share the internet:

Right click LAN card which is connected to Internet under Control Panel -> Network Connections and click ‘Sharing’ tab and enable both the options to share Internet. (Note: Unless there is another enabled LAN setting you will not be able to see the shared tab under properties)

Click Ok and close. This option is given by the Windows OS known as ICS (Internet Connection Sharing).

Now you can use Internet from both Computer A and Computer B from a single connection.

So this is the setup you need on the Host computer as you requested, if you turn out to need help witht he XP one too, let me know:)

Feb 14, 2009 | Compaq Presario 700 470024-192 Notebook

2 Answers

No connection


hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

May 12, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
HP Photosmart C6280 Printer Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...