Question about JVC CU-VD10
I have a new camera and a new DVD burner. The Camera has a USB
Mini B port and the DVD burner has a USB Mini B port. The cables
that came with the camera and the burner are both the same. A
Mini B plug on one end and a standard USB plug on the other. I am
unable to hook the camera to the burner as shown in the JVC DVD Burners
instructions. I might be missing something but how does it hook
up. Thank you for your assistance. Fred Ball
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I spoke to JVC reference this problem and they suggested I returned it to them and they would check it. They collected the burner from my address checked it found there was a problem and gave me a new one.
Posted on Mar 12, 2008
I BUT A JVC EVERIO BURNER AND I CANT BURN MY VIDEOS FILES I insert the Disc in the Burner, it tries to recognize the disc and then comes up with , DISC ERROR CHANGE DISK
Posted on Dec 07, 2008
here is the address to download your manual.
best of luck
please remember to rate me
If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03
Posted on Mar 03, 2009
see if the player tries to read the disc. Load a disc and listen.
Does the player make squealing noises or is it totally quiet? Squealing noises may indicate that the player is trying to synchronize with the disc but can't due to an obstruction on the lens or in the laser path inside the pickup or a defect in the pickup. This can also be caused by an intermittent signal problem due to a faulty ribbon cable.
Totally silent means that the photo sensor is not getting any usable input from the laser at all, meaning that the pickup is "blind" for lack of a better word.
This can be caused by an obstruction of the beam by foreign matter on the lens or inside the pickup all the way to a marginal or failed laser diode and/or photosensor array. This can also be caused by a bad ribbon cable with one or more severed traces.
You could try to clean the optics. This is the most common malfunction as far as i know in all disc players. It would involve taking the cover off and finding a way to expose the lense, and then cleaning it with a very gentle brush. some players have a cover for the lense that swings to the side during playing, this greatly reduces the chance of dust accumulating, but its still worth the try.
If you actually see dust on the lense, then its just that simple. clean, close, play.
It may also be worth your while to check on the small shafting that guides the carriage of the laser pickup. Dirt, grome, dust and solidified lubricant can cause stoppage of the carriage and the laser eye then fails to read the next track. Please refer to the image i have attached.
Also Make sure your box is not blowing really hot air and nothing is right behind it blocking it.. Turn it off for a few minutes and let it cool down and then give it a try playing the discs..
Posted on Apr 09, 2009
Hello to connect this device to your computer you need a standard USB cable. You can get this from any computer store for cheap.
You can download the manual from here:
Posted on May 27, 2009
Tips for a great answer:
Jul 17, 2017 | JVC Everio Share Station DVD Burner Burner
Dec 12, 2009 | JVC Everio Share Station DVD Burner Burner
Aug 30, 2009 | JVC Everio Share Station DVD Burner Burner
Aug 27, 2009 | JVC Everio Share Station DVD Burner Burner
Mar 03, 2009 | JVC Everio Share Station DVD Burner Burner
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: