Question about HP Compaq Presario V6000T Notebook

1 Answer

Windows boot manager page with status 0xc00000e9

I am using a Compaq Presario V6000

It has a partition on it that is meant to house recovery to original factory default. Not quite sure how to get into it.

When I start it I get a black screen offering to start in recovery mode or boot up in normal mode.
If I choose normal mode I get this
Windows failed to start. A recent hardware or software change might be the cause. to fix the problem:
1.Insert windows installation disc and restart your computer.
2.Chose your language settings and then click "next".
3.Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Windows\system32\config\system
Status: 0xc00000e9
Info: Windows failed to load because the system registry file is
missing, or corrupt

I do not have a windows disc and it is that long ago when I created the boot disc I have no idea where it is.

When I powered down and rebooted I got
Windows Boot Manager
Windows encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or faulty CD-rom drive that is failing. Make sure that removable storage is properly connected and then restart your computer.
If you continue to receive this error message, contact the hardware manufacturer.
Status : 0xc00000e9
Info: An unexpected I/O error has occurred

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

If you don'yt have a Vista DVD,you can borrow any for startup vista repair. This is very common and HP/Compaq don't usually give operating systen vista dvd

Posted on Oct 12, 2009

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: it has a blue screen

your windows OS is corrupted, you have to reinstall everything from the scratch. Doing a windows repair will not fix it.

Posted on Mar 03, 2011

SOURCE: windows failed to load because the system registry

Do a system restore to a time before any thing went wrong. Otherwise here is a step by step way ti fix it all up. at the link below. http://support.microsoft.com/kb/307545

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Black screen v6000 laptop "HELP Please"


It appears the hard disk has been wiped/formatted and does not have an operating system installed.
You need to get a Windows Vista installation CD and if the Windows label on the bottom of the laptop is still attached then this label has the product installation code.
Boot up with the Windows Vista installation CD to install the Vista operating software then you need to install the Presario device drivers.

You can download the device drivers from the Compaq/HP WEB support/download page. Make sure you select your model laptop and the Windows drivers you require and install them. Click on this link to download the drivers: -
www.compaq.com/country/cpq_support.html

Mar 19, 2012 | Compaq Computers & Internet

1 Answer

How to rest a compaq presario cq56 115dx


hit f11 one you turn on the computer keep hitting it until it boots into the recovery partition if that doesnt work but you can get into your computer do this


START > Control Panel > Administrative tools or shorter way:
START > run > compmgmt.msc and press enter
then Disk management
Find which is recovery partition
Make Mark partition as Active
Then restart pc.

Mar 20, 2011 | Compaq Presario CQ56-115DX Laptop

1 Answer

When i start my pc, os not found. the recent OS is windows vista home primume and i was not be able to burn the recovery disc in recovery partition, how can i recover my file? and where i can find to buy...


use windows vista home premium cd
boot using windows vista cd
after setup run chose repair your computer this option will detect your previous windows
it will direct you to system recovery option and this process wil automaticly repair and restore you system, wait and follow the instruction until finish


i hope this helpful
thank you for using fixya

Feb 07, 2011 | HP Compaq Presario V6000T 15.4" Notebook...

2 Answers

When I powered down and rebooted I got Windows Boot Manager Windows encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage...


hmm seems a lil odd it appears that maybe your internal computer hard drive is failing or that its not properly connected if its happened recently with no internal computer changes then its definitely the hard drive failing on you

Apr 22, 2017 | HP Compaq Presario SR1110NX PC Desktop

1 Answer

Wont boot up,black screen.message on screen says,invalid partitio


When you power up your computer, the system examines the master partition table to determine what volume to use to boot up the operating system, and detected invalid information within it. This is caused by an incorrect or missing active partition.
To resolve this issue, consider the following steps:
  • Boot up the computer with a Microsoft Windows 98 boot up disk or Windows XP recovery console. Select the correct bootup device before you do that.
  • At the DOS command prompt, type in: fdisk
  • Question - Do you wish to enlarge large disk support (Y/N) ?
  • Enter: Y
  • Now to check for active partition, enter: 2
  • Look under the Status column. The active partition is usually assigned to the drive which contains your operating system.
  • If there's no active partition set, enter the number of the partition to make active
This must solve your problem.

Apr 15, 2010 | HP Compaq Presario 2200 Notebook

2 Answers

Hi there .I would like to help my friend use the recovery partition on her compaq presario c700 laptop to either use her recovery dvds or simply to reformat(restore the computer to original factory...


The recovery partition is usually hidden and cannot be seen in the Windows operating system with out adjustments to the way the files are displayed.

Most likely they are present and you can use the following methods to access the HP Recovery Manager utility.

PLEASE NOTE: Using the recovery utility will result in a complete loss of data. Please backup any data you wish to preserve before running the HP Recovery Manager as all data such as photos, documents, music and favorites will be completely erased after the recovery is complete.

There are 3 ways to recover an HP/Compaq PC using the HP Recovery Manager.

Method 1 involves booting into the Windows Operating System, and starting the Recovery Manager from the HP utilities.

Method 2 involves pressing the "F11" key during initial startup to access the Recovery Manager from the recovery partition.

Method 3 involves using personalized recovery disks created by the user when the machine was new or a replacement set of recovery disk obtained form HP.

Follow the on screen prompts to complete the process. As the machine is has been set back to how it was from the factory, make sure to apply all Windows updates as there will be approximately 3 years worth, including 2 service packs, many critical updates and driver updates.

More on this subject here at HP's support site http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00809678

Feb 24, 2010 | Compaq Computers & Internet

1 Answer

Due to a virus and boot up loop, I have completed a PC Recovery on a Compaq Presario with Windows XP SP 2. The hard drive now has a partition with C maintaining my old files and PR (D) the recovery...


I would back up my data then delete both partitons and format as one drive.. Thats what I would do.. But dont do this unless you have a copy Vista or XP on CD.. The install files for your system are on your hard drive..

Dec 13, 2009 | HP Compaq Presario SR2020NX PC Desktop

1 Answer

Acer 5520 notebook startup issues


You are missing the file NTLDR.exe and NTKRNL.exe. NTLDR is the first file your computer sees when it is booting up and it brings up other files to get your computer started then it turns it over to Windows file called NTKTRNL which actually brings up the Windows operating system. The only wayto fix is to find a Windows disc and copy them over to three folders that you have either win32, windows or winnt. Copy to all three if you see all three buy only one of those starts your system and it seems like it's win32 based on your error, folder under your C: drive. That will solve your problem and your computer will boot up normally.

Dec 23, 2008 | Acer Aspire 5100 Notebook

1 Answer

Recovery drive


Usually (since drive d is another partition) you would boot to it by means of startup, the laptop should say something about, to enter a menu here press F6 or something similar. So when your computer turns on, press the f12, or f8 or f2 keys and see if it gives you a menu (the recovery option would most likely be in there). Beware to PLEASE backup your files before formating and turning everything back to as it was :) . Also, you should seriously consider asking Compaq for a recovery DVD, they are usually free and they are livesavers if something goes wrong with the partition on your lappy.

Dec 16, 2008 | HP Compaq Presario V6000T Notebook

2 Answers

Windows Xp installation in compaq laptop


Buy an XP cd if you are going to do it legally, reboot your laptop and boot off of the CD, The XP installation screen will then appear, you will have to choose which partition you want to install XP on, first you may need to delete the partition currently there, then create a new partition. use the default size because you need to leave at least 8 mb free space, then its just a matter of going through the installation steps with your serial code, location, and other details.

Sep 08, 2007 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
HP Compaq Presario V6000T Notebook Logo

4,917 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...