Question about Hobart Food Mixers
My large industrial hobart mixer has chips in the paint and the areas look rusty. I'd like to wire brush the spots and then prime and paint it. What kind of paint do I use that would be food grade paint?
You can get spraycans of paint from hobartcorp. by the way no paint is food grade
Posted on Jan 09, 2010
The answer is complex. First, is this going to be used in a food service industry? If yes, then you need to do more than wire brush and touch up with spray paint. You will need to remove the paint, prime, and repaint with a catalyzed urethan (as was done in the factory); this is the only acceptable food grade paint application for steel. If not, then you will need to sand - not wirebrush - the affected areas, prime with a low xylene primer (such as auto primer) and repaint the spot with a low xylene spray paint such as Zynolite's Rust Mate One Part Pre-Catalyzed Epoxy (also comes in brush on). Hope it helps, CS
Posted on Mar 01, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 12, 2015 | Hobart 30 Qt Mixer Model D-300 Used Good...
Nov 21, 2014 | Hobart Food Mixers
Jan 10, 2012 | KitchenAid K5SS Heavy Duty Commercial...
Mar 22, 2010 | KitchenAid K45SS Classic Stand Mixer
Jun 12, 2009 | Hobart D300 Stand Mixer
May 07, 2009 | Hobart D300-6036 Mixer
Jan 03, 2009 | Hobart N50 Stand Mixer
1,878 people viewed this question
Usually answered in minutes!