Question about Televison & Video

Open Question

I've got a Xenius LCDX32WHD88 TV with no remote... How can I turn it on? The button on the side makes the blue light on the bottom come on but no picture.... help? Please

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MikeNJ1964
  • 398 Answers

SOURCE: Auxiliary button on tv remote (I believe) needs off and I can't get figure out how...

The remote should have TV, VCR, AUX and maybe CABLE buttons at the top, one of which will light up when any button is pressed. Since it is a universal remote, the button at top lights up to let you know what mode it is in. If the AUX button lights up when any button is pressed, it means the remote is currently set to the AUX mode. To set it back to TV, simply press the TV button at the top. This puts the remote back in the TV mode and the TV button should now light up when any button is pressed. If that works and you are using a cable box with that set, then make sure the TV is on channel 3 by pressing 3 ENTER.

Posted on Aug 14, 2007

Ad
  • 1 Answer

SOURCE: Samsung TV remote control

I HAVE THE SOLUTION TO THIS PROBLEM.

Confirmed with Samsung tech support. Problem is with remote. to fix, simple take the batteries out of the remote. Press and hold the UP Volume button for 2 Mintues (no cheating, it has to be at least 2 minutes), this Reset's the Remote Control. Put the batteries back in. Bob's your uncle. all fixed.

Posted on Jan 26, 2008

  • 86 Answers

SOURCE: My mptv68a tv locked (don't know if it's child lock)

Try these codes to unlock the TV
0711 or 0000

Posted on Feb 01, 2008

  • 3 Answers

SOURCE: Please Help!!!

Alright, I've got a solution now. using the menu button on the TV, scroll down to the "7F..." option (using the volume down button on the menu screen). Then turn off the TV and turn it back on. It worked for me at least, good luck!

Posted on Apr 08, 2009

ronaldo_ross
  • 1056 Answers

SOURCE: Help! Turned on our tv and all there is a blue

Somebody put a lock on it. LOL There is several keys you can press together in all TV to go into service mode, I don't remember the one for that particular model. See if you can find it on the internet. Look at one of those television case history site. Some are free. Be carefull you don't adjust anything once in the service mode!! That is actually used by technicians only. A consumer would not have a clue what they are adjusting.

Posted on Jun 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I tune my remote control to my xenius TV


xenius tv remote code - Technical - Digital Spy Forums

forums.digitalspy.co.uk/showthread.php?t=492951

Digital Spy
Nov 30, 2006 - 24 posts - ‎12 authors
hi all, found this site trying to sort my new tv out. i am trying to set the code on my skyremote to control the volume etc on my xenius tv, but i cant ... Vestel remote control question (TOO versatile ...
6 posts
Sep 2, 2010
TV stuck in standby mode. - TV and Home Entertainment ...
11 posts
Feb 9, 2010
More results from forums.digitalspy.co.uk

Xenius LCDX37WHD88 - Who Makes This TV & Wheres The Customer ...

www.avforums.com > ... > Televisions > LCD & LED LCD TVs
Jul 15, 2009 - Hiya, I am having problems locating a picture of the remote control for a... hi my remote has broken for my xenius tv I have bought a universal ...

I cannot programme channels for my xenius 32" lcd - Fixya


Jan 13, 2016 | Televison & Video

1 Answer

My xenius blue light is on but the tv wont actually come on?


Try unplugging the tv and re plug in. Or you may have an issue with your power board.

Apr 13, 2013 | Televison & Video

1 Answer

Xenius 37" lcd blue light just keeps flashing


my 37" xenius tv started losing its picture to a stripe screen then started flashing red blue green .know wont come on at all .wht part do i need to fix it please

Aug 07, 2012 | Televison & Video

1 Answer

Remote will not respond. New batteries installed. I can change channels at receiver, but the remote will not do anything, even though all the led's on the remote will show lite when pushed. 6.4 ir/uhf...


Is the remote for TV 1 or TV 2. If it is for TV 2, the blue tab with the number 2 should already be on the bottom of the remote. If it's for TV 1, you need to remove the blue tab from the bottom of the remote and flip the tab over (should be a green tab with only a green 1 on it). Once you change the tab, see if you can change channels. If you can't, follow the instructions below.

At your TV 1 location on your receiver, press the System Info button to display the System Info on your TV. At the bottom of the screen, you should see Primary and Secondary Remote Addresses. Make a note of the remote addresses. With the new remote, press the record button. If this is the TV 2 remote (blue tab on the bottom), the secondary number may change; if TV 1 remote (green tab on the bottom), the primary address should change. Exit from all the menus on the TV screen till you are back to your TV picture - then try the remote.

If the above steps do not work, try the instructions below to manually program the remote to the receiver.
  • Remote to the receiver:
    1. Go to System Info screen.
    2. Hold down the SAT button until all mode lights light up.
    3. Enter a number between 1 and 15 using the numeric keypad on the remote.
    4. Press the pound (#) button.
    5. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 3 will appear in the System Info screen under Remote Address.

Aug 16, 2011 | DISH Network IR Remote Control

1 Answer

My xenius tv won't turn on, which pressing the power button the red light turns blue and the screen stays black?


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


Take care......

Dec 20, 2010 | Televison & Video

1 Answer

Tv2 light does not come on


hi hammonhph! I will be more than glad to assist you in this concern. Lets program the remote for tv2, lets make sure that the battery's are brand new, please go to the front panel of the receiver, make sure that u have the remote2 with, turn on the the tv1, you got picture, on the front panel of the receiver, you got 1 green and the blue light is off.. push the power button on the front panel of the receiver once to turn off the green light, once its off the tv will show a black, blue or snowy screen, push the up button on the fron panel of the receiver until it shows the system information screen, look for the primary and secondary remote address, primary and secondary remote address should show a number on the white box ex.. 1 and 1 on the green box, secondary is ex 2 on the white box and 2 on the blue box, how to reporgram the remote to the receiver.. press and hold the sat button and wait until all lights lit up, once it all lit up, release it and press any number from (1 to 15) but for this ex is press 9, then press the pound button (#) that is under number 9, once you press the pound button the sat button will flash 3 times and then press the record button once, record button is under the cancel button or view tv button, once you are done check the secondary remote address, it should be 9 on the white box and 2 on the blue box, save the settings by using the remote 1, selct done on the screen and it will go back again to black, blue or snowy screen, press the sat button once on the remote 2 and the big red power button, the blue light should turn on, just in case the blue light dont turn on, press the power button on the front panel of the receiver for 10sec to reset the receiver, it will acquire the sat signal and go to a progress, and it will download the programming guide, check if blue light is not on, press the big red power button on the remote2 to turn on the blue light and it should work. if just incase the blue light dont turn on, the remote is bad and you need to call 1-800-333-3474 for the replacement of the remote..please feel free to get in touch if you have any query..

Jul 06, 2009 | DISH Network 322 DTV Receiver

1 Answer

My Wii remote blinks blue lights but it won't work with the Wii


you have to press A and then the remote buttons at the bottom will turn blue and make sure you have the gray thing that sits on top of ur tv is where you can directly aim the remote at and the little hands should appear.:) Hope it helps.:)

Jun 20, 2009 | Nintendo Wii Remote Controller

2 Answers

Xenius 27" flat panel tv


i just got a brand new xenius flat tv on pay as you view 1 week old and watching it and it just switched it self off the power light is there but wen i switch it on the power button only flashes no picture then switches it self str8 to stand by again well not happy any 1 no wats wrong be sides its fooked lol

Feb 27, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74377 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...