Question about HP DesignJet 800 Printer
Hp designjet 800 system error 21:11 Solution?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I recently had this problem as well and it was the service station gunked up with a bunch of ink over the years. Remove the right hand cover of the plotter. Remove the 2 screws that hold the service station in place and slide to the right to remove. When removed, take off the small motor by the gears. The rest is all plastic, I removed the 3 screws and "popped" the two black parts apart and cleaned the spitoon, which is just a sponge. I then dropped the thing into the sink and poured dishwasher soap. Let it sit for about an hour and rinse. It is really really messy. Then put the whole thing back together again. If I recall, the motor was the only electrical component.
Use care and caution so as NOT to break anything and I recall that the only electrical part was the small motor by the gears.
This wasn't so bad and I spent about 8 hours just because I was exercising much caution. If you're more mechanically inclined on the first go, then I would guess about 1 hr to clean and another 1 or two for dry time.
This SOLVED my problem and WOW there was a bunch of ink over the years. Don't worry, that is what the "spitoon" is used for to soak up the excess ink. Well, if not maintained or replaced, then the ink gunks the insides rock hard as in my case.
A new station is about $160 bucks. If you have HP install then you are looking at a few hundred more on top of that. To me, it was worth it and if it didn't work then I just get a new one and I had nothing to lose since the plotter was getting past the 21:10 error.
Be sure to download the HP Service Manual online so you know how to remove the service station. It is just 2 screws. Without the manual, I probably would have taken off many more screws as I would not have thought the service station simply slid out to the right. The designjet is well designed and was glad that I found a service manual online.
Good luck and use caution,
Posted on Feb 15, 2009
Try the following link for more troubleshooting information:
Posted on Mar 31, 2009
one of the printheads is bad.....check the error code again,because 060308 does not exist in hp designjet 1055cm plotter.
Posted on Aug 01, 2009
Tips for a great answer:
Feb 15, 2014 | HP Designjet Z6100 InkJet Printer
Jul 09, 2011 | HP DesignJet 500 InkJet Printer
Jan 11, 2010 | HP DesignJet 500ps InkJet Printer
Dec 11, 2009 | HP DesignJet 800 Printer
Sep 30, 2009 | HP DesignJet 800ps (24 in.) InkJet Printer
Aug 19, 2009 | HP DESIGNJET 800 42IN 1200DPI 96MB PAR USB...
Feb 23, 2009 | HP Office Equipment & Supplies
Nov 18, 2008 | HP LaserJet 4 plus Printer
Oct 25, 2008 | HP DesignJet 500ps (42 in.) InkJet Printer
959 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: