Question about HP LaserJet P3005n Printer

2 Answers

Hp clj 4600 prints fine one side but when duplexing it folds the corner of the sheet as it exits the paper path to print on other side of sheet

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

This is due to the paper pickup assy, when the paper is being fed back through the paper pickup from the transfer belt it is folded on the corner as it is passed back through.. The solution would be to replace the paper pickup unit.

Posted on Oct 19, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

Replace the FUSER Assy.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a paper jam at the back of my printer, where do i open it


Hopefully this will help you. Good luck !

Causes of jams

NOTE If you are experiencing jams in the duplex paper path, make sure that the duplex-tray

lever is set to the correct media size for your country/region. Open the duplex-paper-path door

and look at the embossed arrow on the lever. Make sure that it points to the media size for your

country/region. If the size needs to be changed, push the lever all the way in for duplex printing

on letter- and legal-size media, or pull it all the way out for duplex printing on A4-size media.

A4

LTR,

LGL

A4

LTR,

LGL

Occasionally, paper or other print media can become jammed during a print job. Some causes include

the following events:

? The print media that is being used does not meet HP specifications.

? The media is damaged or has objects attached to it, such as staples or paper clips.

? The environment in which the print media was stored is too humid or too dry.

? The input trays are loaded incorrectly or overfilled, or the media guides are not set correctly.

? Too many sheets have accumulated in an output area, or sheets are blocking an output area.

? Media is added to or removed from an input tray during a print job or an input tray is removed from

the all-in-one during a print job.

? The cartridge door is opened during a print job.
ENWW

Mar 13, 2015 | HP LaserJet 3300 All-In-One Printer

2 Answers

Re - Phaser 8200DP Solid wax printer; very often doesn't pick up paper from bottom tray, resulting in 'jam' message. Also, tends to fold the top corner of a two-sided (duplex) print job on exiting after...


Clean the pick up rollers with alcohol. They need to be really grippy.
If it's folding the corner of paper I expect there is a bit of torn paper stuck in it.

Oct 29, 2013 | Xerox Phaser 8200 Laser Printer

3 Answers

HP Laserjet 2015n printer


Sir, the Hp LaserJet 2015n printer CANNOT automatically do duplex printing since the printer does not include mechanism and paper storage areas to cycle the paper through the printer a second time and print on the reverse side. Manual duplex printing can be done as follows: Choose duplex printing and remove all sheets after the printing is complete. Turn the sheets over while preserving the orientation and insert them in the paper feed path. I have an HP 1020 laserjet printer which is similar to the 2015.

Aug 22, 2009 | HP LaserJet P2015n Printer

1 Answer

Print Quality Problem


Hi jepeto997:
Try these steps.
Check for and remove any media, jammed
paper, or debris found in the printers exit
path.
2. Did this correct the problem?
Complete. Go to Step 2.
2 1. Clean the maintenance kit wiper blade or
replace the maintenance kit.
2. Did this correct the problem?
Complete. Go to Step 3.
3 1. Check the exit area, exit frame, the
preheater, maintenance kit, and the
printhead (including the paper release blade)
to see if there is anything touching the drum
assembly.
2. Reseat any printer component interfering or
touching the drum assembly.
If there are streaks on the front side only of a
2-sided print, the preheater may be scraping
ink off the print.
2. Look for ink shavings along the streaks on
the printed paper.
3. Clean the preheater using the Control Panel
Remove Print Smears function.
4. Did this correct the problem?
Complete. Go to Step 5.
5 1. Possible weak or missing jet. Print the weak/
missing jet test print from the Control Panel,
see "Weak/Missing Jet" on page 5-33.
2. Did this correct the problem?
Complete. Go to Step 6.
6 1. Possible discolored jet. Print the solid fill test
print, see "Black, Red, Green, Blue, Cyan,
Magenta, and Yellow Solid Fills" on
page 5-40.
2. Did this correct the problem?
Complete. Go to Step 7.
7 1. The X-axis drive is not functioning correctly.
If the X-Axis Drive does not move the
printhead smoothly and evenly during
printing, vertical lines appear on the print.
For information about X-Axis Drive
problems, see "White Stripes (Pinstripes)"
on page 5-30.
2. Did this correct the problem?
Complete. Go to Step 8.
8 1. Smears on a duplex print can be caused by
the paper preheater operating at a
temperature that is too high or debris is in
the duplex roller or duplex paper path
guides.
2. Run the service diagnostics Duplex Path
test to check the paper preheater’s
temperature.
3. Is the operating temperature within the
correct value range?
the paper preheater operating at a
temperature that is too high or debris is in
the duplex roller or duplex paper path
guides.
2. Run the service diagnostics Duplex Path
test to check the paper preheater’s
temperature.
3. Is the operating temperature within the
correct value range?
Replace the
preheater.
Replace the
electronics
module
Hope this helps
3. Clean the paper release blade.
4. Did this correct the problem?

May 20, 2009 | Xerox Phaser 8560N Laser Printer

1 Answer

Paper is jamming when I print something


Were you able to remove all of the original jammed business cards? where the leading edge of the "Fanfold" prints occurs, you will probably find something blocking the paper path. HP printers usually have a limit on the paper weight that the printer can handle when doing duplex (2 sided) printing. Check this against the weight of the cards you are printing.

Apr 18, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Hp c6180 keeps erroring that there's no paper, when it does recognize paper


folded corner is 2 things
a) it's gettig folded somewhere along the paper path ( you would have to stop it at every step to see at what point it gets folded)

b)usually the fuser claws are the problem ( right before the exit the part that gets hot has some claws that ride ON the heat roller 3-5 depending on the machine, one is going bad )

Aug 18, 2008 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP LJ 4350 paper folding problem


It could be either the paper feed assembly, part # RM1-0012, or the registration assembly, part #RM1-1098. These parts can be bought at TSAworld, phone # 1-800-633-6626

Aug 08, 2008 | HP LaserJet 4350 Printer

2 Answers

Laserjet 4250 not dupexing


Had this same issue on my 4250dtn. The solution in my case was that both paper trays were set to "custom". This is a small lever on the right side toward the back of the paper tray. Even HP was stumped on this. Hope this helps.

Apr 01, 2008 | HP LaserJet 4250n Printer

3 Answers

Paper jams only while duplexing


Back door broken, diverter gate broken?
I would look for something like this. did the tech clean the duplexers tires??

I would also try a different duplexer if possible-paper path sensor may be dirty or obstructed

Mar 07, 2008 | HP LaserJet 4350 Printer

1 Answer

Duplexer problem


First, the machine always prints the first page first. Make sure you have the right driver (4 plus and not 4)and check the settings in the device settings of your printer driver on the pc. Also make sure the duplex unit is for the 4 plus and not the 4.

May 17, 2007 | HP LaserJet 4 plus Printer

Not finding what you are looking for?
HP LaserJet P3005n Printer Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...