Question about Car Audio Receivers

Open Question

Kenwood KDC 8011

When I use the seek feature ("Auto 1") of my Kenwood KDC-8011 car stereo, it continually searches and doesn't stop. I'm in Kansas City and can access many radio stations, so it's not that there aren't any stations around. I think there's a setting I've missed. Can you help?

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: Kenwood KDC-716S

FLEX CABLE has been worn out, its thirty bucks and easy to install.

Posted on Oct 25, 2008

  • 1 Answer

SOURCE: Wiring for a kenwood kdc 1020 cd player

if you have the wire connector it's easy.....give the negative conection to the body of the player..find the wire from the battery with has the power supply even when the switch is off..and connect it to the yellow wire.that is for the memory...find the wire which has the power when the switch is on ,and connect it to the red wire from the player....what i mean by switch is the ignition switch... u can easily find the speaker connections...most speaker wires comes as blue,ash,green,white...there are two wires from each colour......

Posted on Dec 09, 2008

  • 10 Answers

SOURCE: Call constantly cuts in

you must of traped a wire when you have fitted the head unit to the car when you have pushed it into the dash or the call wire is going to earth on something behind the radio in the dash hope you fine it hope ive help you let me now how you get on

Posted on May 30, 2009

  • 1126 Answers

SOURCE: how do i turn on the aux feature for my kenwood

Page 13 Auxiliary Input Display Setting.
Yes, the KDC 319 is covered in this instruction manual.

Posted on Nov 04, 2009

  • 1326 Answers

SOURCE: how to program radio stations on a kdc-bt742u

Get to your station then hold the preset button you want to set it to for about 5 seconds, it will beep confirming you have it programmed

Posted on Nov 05, 2009

  • 111 Answers

SOURCE: My Kenwood KDC-241 car stereo loses it memory when

you need to rewire it,it seem like you connect the YELLOW (memory wire)to the ignition line.
You will need to connect it to constant pwr line and the RED to the IGNITION line

Posted on Jan 22, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Cannot get it to power on How does it work?

Kenwood Excelon DDX9902S DVD receiver at Crutchfield ... > ... > In-dash Video Receivers Crutchfield Corporation
Rating: 4 - β€Ž21 reviews - β€Ž$674.99 - β€ŽIn stock
Kenwood Excelon DDX9902S Android Auto integrates your phone's app with the ....deliver an ultra-clean signal for adding additional amps for even more power. ...... Only thing I can't get to work with the Apple Car Play is the ITunes radio.

Car Stereos FAQ - Crutchfield > ... > Car Stereos

Crutchfield CorporationJump to What's the best way to connect the Crutchfield wiring ... - A: Most CDreceivers will play at least ... for example, some receivers work with ... If you can'tfind a new cassette deck ... the remote wire did not power the amp .... KenwoodExcelon KDC-X399 ... 12 tips for getting the best sound quality in your car.

Kenwood KDC-BT362U CD receiver at > ... > All Car Stereos

Crutchfield Corporation
Rating: 4.5 - β€Ž174 reviews
A smartphone haven With Kenwood's KDC-BT362U CD receiver, you can ... A newcar stereo offers power that's superior to most factory radios, along with .... Gettingthe installation kit and the wiring harness with my stereo purchase was great. .... Cons: Pandora did not work and I tried contacting customer service and their ...

Kenwood - Car-Audio FAQ

Jan 06, 2016 | Kenwood Car Audio Receivers

1 Answer

Just got a kenwood kdc-x799 car stereo and the volume keeps going up and down... how can I stop this?

The receiver may have the feature that turns it up and down based on noise levels in the car. You can turn the feature off or set on low.

Jul 11, 2015 | Kenwood Car Audio Receivers

1 Answer

I lost the wiring color codes for my kenwood KDC-MP628 CDReciever for the deck
1) Remove the ashtray and the two outermost screws exposed in the ashtray cavity.
2) Remove two screws from each side of the dash console.
3) Remove the climate control knobs.
4) Unclip the trim bezel and remove.
5) Remove four screws securing the car stereo to the dash.
6) Pull car stereo from console releasing antenna and connectors.

Constant 12V+ Red Switched 12V+ Orange/Yellow Ground Black Illumination Red/Green Dimmer Green/Red Antenna Driver's Pillar Front Speakers 6 1/2" Doors Left Front (+) Orange Left Front (-) Black Right Front (+) Gray Right Front (-) Green Rear Speakers 4" Tail Gate Left Rear (+) White Left Rear (-) Red Right Rear (+) Yellow Right Rear (-) Blue

Jun 16, 2009 | Kenwood KDC-MP628 CD Player

1 Answer

I need the wires connector

ebay is a good place to search.
if that doesnt turn up 1 try any audio visual store or a kenwood approved retailer will be able to order 1 for you

May 20, 2009 | Kenwood Excelon KDC-X789 CD Player

2 Answers

I need the Kenwood KDC-MP438U user manual

The Kenwood crack code is KCAR. Give that a try.

Apr 18, 2009 | Kenwood KDC-MP438U Car CD/ MP3 Player

1 Answer


Hi there,
For the manual for this unit head to this page]

However im pretty sure you actually use the volume or tune/seek to change the numbers then when changed to what you woudl liek again simply hit the main button you used to get into the clock setting originally,
Hope this helps

Mar 09, 2009 | Kenwood KDC-122 CD Player

1 Answer

How do I stop the auto scan for radio stations?

try pressing the scan button again, or push the seek button.

Jan 21, 2009 | Kenwood KDC-MP4028 CD Player

6 Answers

Security Code for Protect mode

Turn on the car so the radio is flashing "Protect." Look on the front / removable face of the stereo. On it you will find a small round hole - that's a reset button. Find a small paper clip, unfold the clip and stick it gently into the hole. The "Protect" will stop flashing, and Kenwood will be displayed. Unfortunately all your settings/presets will be gone, but at least the stereo is working again!

Apr 30, 2008 | Kenwood KDC-W3534A CD Player

1 Answer

KENWOOD KDC-1020 user manual desperately need a user manual for my wife thank you

Mate go here the kdc 1023 manual is the same and its a free PDF download :)

Mar 08, 2008 | Kenwood KDC-2025 CD Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4679 Answers


Level 3 Expert

56836 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides