Question about Lexmark X4270 All-In-One InkJet Printer

1 Answer

What is error #1200 mean. - Lexmark X4270 All-In-One InkJet Printer

Posted by on

  • mewebaby May 11, 2010

    either there is a paper jam or the cartridge carrier is jammed. 1. Turn off your all in one and unplug from wall 2. check for any paper jams 3. Open the control panel. 4 Open the cartridge access door 5. take the cartridges out and snap them back in 6. Check for objects obstructing the carrier. 7. Plug in your all-on-one 8. Press power to turn your all in one on Hope this helps



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Hope this resolves your issues.

Posted on Oct 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a zanussi 6hg 1200 rpm it's flashing error code E 60 what does it mean

Family error code E60 is visible to customers and (could be E61,E62,E66,E68 and E69 only visible in service mode) means problem with heating phase.
Possible failures : heating element faulty, NTC sensor faulty, PCB faulty, wiring.


Mar 24, 2015 | Zanussi Washing Machines

1 Answer

What does code: H4-00 mean

The H4-00 is a low temp error in the fuser. This can normally be reset by doing the following at the machine:

On the button panel hit
pound, star, C, star
then enter 14, hit start, then execute on the screen.

This should clear any one-off errors EquipMyBiz

Aug 04, 2014 | Sharp MX-4101N Multifunction Printer Color...

1 Answer

Yellow patch error

Not too sure what you mean about a yellow patch error.
Does this 'Yellow patch" have a splurge effect or is it more regular?
The only thing I can suggest is try several purges of the head.
The other possibility is, some torn media stuck deep inside the print unit further investigation would be necessary.
Good Luck.

Apr 10, 2014 | Xerox Corporation Phaser 6600/N Laser...

1 Answer

Error 1200 what is this. I cannot locate my user's guide

Hello Sir, The error on this printer means that the AIO which is All-In-One is stalling or completely stalled. The repair procedure is given below. But you can reply me back clarifying that is it showing Cartridge error 1200 or Hardware error 1200. :--------- THE PROCEDURE:--------------------------
  • Turn the Printer completely off to turn off AIO.
  • Then check for any Paper inside.
  • After confirming that there is none then Un-plug the AIO from the Outlet located in the wall.
  • After 10 Min, replug and check function.
Also the problem can be on the Catridge ( Most Commonly ). In this case you need to check the Catridge socket for any obstruction and also check that the Cartridges are not stuck or misplaced.
Reply me for any further assistance on the Issue.

If the printer is only showing that error 1200 then take care of both the AIO and cartridges reset. Both have to be done.
Thank you Sir, Have a nice day.

Oct 20, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

My lexmark X4250 is showing an error code 1200.

It means that you have a paper jammed somewhere in the machine. Check in all the places where the paper moves for some scrap of paper that may be covering a sensor.

Aug 22, 2009 | Lexmark X4250 All-In-One InkJet Printer

1 Answer

What is error #1200

System error code 1200 means "The specified device name is invalid." This error code may also display as "ERROR_BAD_DEVICE" or as the value 0x4B0. ..

Aug 18, 2008 | Lexmark Office Equipment & Supplies

1 Answer

HOTPOINT ULTIMA 1200 WM72 Error Code

f30 code means there is a problem within the motor curcuit,check connections at the motor and check motor brushes are not worn.

May 05, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Bosch Excel 1200 wahsing machine, when trying to activate spin, it shows the normal 10 minutes, but then goes straight from 8 mins to 1 min and items arent properly spun

bosch exxel 1200 washng machine
has error message 04 and wont drain or spin

what does this mean?

can you help?
have lost instruction book

Mar 27, 2008 | Washing Machines

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides