Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

Open Question

Printer is telling me that I have to keep the same size paper

I am trying to print my logo envelopes form print master to my kodak 5300. It keep telling me to change the to regular size paper. even though I have changed the setting to envelope

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: Loading envelopes

To load envelopes that are under 7.87 inches (220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps open and toward the front of the printer. To load envelopes that are over 7.87 inches (220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps closed and the short-edge of the envelopes facing into the printer. You can load envelopes up to the maximum fill line in the tray at one time. NOTE: Make sure set the envelope flaps are completely unfolded. NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and damage to the printer6cf668b.png

Posted on Feb 22, 2008

  • 1 Answer

SOURCE: Message says envelope is the wrong size

DOWNLOOD PRINTER DRIVERS C3183

Posted on Jun 19, 2008

  • 25 Answers

SOURCE: My HP LaserJet 4200 prints fine from tray 2, but will NOT print envelopes from tray 1. It WILL print on regular paper from tray 1, but will not print envelopes. What gives? I've already rebooted the

Are there settings on the control panel of your printer?
Is the tray 1 the MP tray? (The one that flips towards you)
If so, can you change the settings of the Tray 1 to Envelope on the control panel?

I hope this helps.

Posted on Aug 14, 2008

  • 40 Answers

SOURCE: unable to print envelopes

On the word program you should change the size of the page to fit to an envelope, otherwise it will not work.

Posted on Dec 20, 2008

  • 1 Answer

SOURCE: printing envelopes on the bizhub 252

After spending way too long messing around with this on my bizhub 250 here's what finally allowed me to print:

I simply changed the bypass tray setting from "envelope" to "normal". I kept the custom size the same (9 1/2 X 4 1/8) and it started to print.

Doesn't make sense, but you can give it try.

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I load envelopes to print?


Hi,
Load the papers/ envelopes from left hand side edge and adjust the knobs of printer tray to accomodate the paper, if present. Usually printer will have the seperate markings on the tray to indicate where to load envelopes and labels.
I hope this is useful to you

Oct 02, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

Trouble printing envelopes on kodak esp3 printer


Have you tried this procedure?
----------------------------------------------------------
Loading Envelopes
You can load plain envelopes into the paper tray of your Kodak ESP 3 All-in-One printer.
Important Do not use envelopes with cutouts or cellophane windows.
1 Remove any other paper from the paper tray.
2 Insert one or more envelopes into the right side of the paper tray with the print side down and
the envelope flaps on the right, pointing left.

3 Squeeze the paper-width guide and move it to its right-most position up against the envelopes.
4 Leave the paper tray open while the envelopes are loaded.

If you have and it's not printing correctly, there is probably a problem with the document you're trying to print.

Jan 16, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Unable to print envelopes


On the word program you should change the size of the page to fit to an envelope, otherwise it will not work.

Dec 18, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Kodak 5300 printer 4x6 printer tray


it could be a problem with printer and least with the print head.......i would advice to contact Kodak tech support...........

Aug 25, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printing greetings cards and envelopes


At the moment it is printing both sides of Greetings cards, but this printer appears to be very sensitive with regards to placng card in the exact position in the paper tray.

Why it will not print envelopes without smudging I still don't know, so I shall just have to write address by hand after I place graphic on the envelope

This 5300 was a Christmas gift from my wife and if I could afford to change it I would. The performance is very dissapointing

Kindest Regards
David Gray

Mar 19, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Loading envelopes


To load envelopes that are under 7.87 inches (220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps open and toward the front of the printer. To load envelopes that are over 7.87 inches (220 mm) in width in the multipurpose feeder, insert the envelopes with the flaps closed and the short-edge of the envelopes facing into the printer. You can load envelopes up to the maximum fill line in the tray at one time. NOTE: Make sure set the envelope flaps are completely unfolded. NOTICE: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and damage to the printer6cf668b.png

Feb 22, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

3 Answers

New Kodak 5300 All In one Problem


tell it a3 envlope ok a5 in settings to print envlope an dyou size ok thx nick

Feb 03, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Owners manual for kodak 5300 printer


Download and install Adobe Reader, if you do not have it.
Use the Get Adobe Reader button at this link

http://www.adobe.com


I am assuming you made a typo as many of us do and the title is correct and this is a Kodak 5300 All-In-One printer please respond if it is not and I will search for the correct printer.

Your printer's manuals and software can be found here

http://www.kodak.com/global/en/service/products/ekn033540.jhtml?pq-path=9104

As I do not know your operating system or version of MSWord, the following are hints about how this is done and may not be step-by-step accurate for you

http://safari.oreilly.com/0201741474/ch08lev1sec5

http://www2.essex.ac.uk/cs/documentation/use/word6/howto/env-lab.html

Dec 23, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5059 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...