Question about Soyo SY-7VEM Motherboard

1 Answer

Sy-7vem soyo cpu upgrade

Just installed a pentiumIII 1.4 ghz intell there any switchesI need to change to operate?it was 100hz it is now 133hz

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 95 Answers
Re: sy-7vem soyo cpu upgrade

Most of the new boards will automatically detect the cpu speed. If possible set the bios to auto detect. Otherwise go to Soyo website and check the manual

Posted on Dec 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Powers on but no screen

When the Power ON Is there any beep.
  • If there is 3 beeps
  • It means problem in the RAM
  • If there is no beep.
  • It means problem in VGA Card or BIOS.
  • And have a local tech take a look at the PC

Mar 11, 2010 | Soyo SY-7VEM Motherboard

1 Answer

I want to change my pentim 4 cpu 1.70ghz.256 ram.motherboard Intel i845 chipset, Intel southbridge 82,801 (ICH2). if I could turn it into pentium core2duo and what should I change or add?

Your motherboard is already maxed-out - no bigger processor is available.
You need a new one, with new memory and a new video card. Or just buy a new pc, it will be cheaper in the end if you aren't a gamer.

Mar 08, 2010 | Soyo SY-P4I 845PE Motherboard

1 Answer

Problem with Soyo SY-P4I845GVISA MoBo

You can easily down load Intel web side because it has intel chip,

Jan 15, 2010 | Motherboards

1 Answer

Soyo SY-K7VMP2 manual

To start you need to go to some of the links here and find the manual.
When I tried, the main site was not accessible. That can change for a number of reasons. The manual may be able to be found at other sites.
Hope you find it.
Since this board is over 7 years old (2002) as stated at the link above, it may be to your advantage to upgrade to a newer board.
Another thing which you will find is that the bios probably should be flashed to get the newest version for this board. Before going too far on this board, everything should be checked over visually. Such as the dust, the components and so on on the surface of the board. You will have to decide.

Aug 31, 2009 | Soyo KM400 Chipset MotherboardAMD Socket A...

3 Answers

I have a soyo SY-P4VSA motherboard with a Intel Pentium 4 2.0 ghz CPU...socket 478..FSB 400mhz. I want to install a socket 478 Pentium 4 2.2ghz processor with 400mhz FSB. Is this compatible?

Yes it's compatible. The best you could probably upgrade to would be a socket 478 Pentium 4 2.8 ghz 400mhz fsb. Hope this helps.

Aug 17, 2009 | Motherboards

2 Answers

Who is the mother board manufature for sy -p41 845pe? what type of cpu does sy -p41 845pe suport and speed range? the type of module, max support capacity and speed ranges? the type of chipsets? the type...

  • Supports all Socket 478 CPUs (400FSB & 533FSB)
  • North bridge: Intel I845PE MCH
  • South bridge: Intel ICH4
System Memory
  • 3 x 184-pin DDR SDRAM
  • DDR200 / DDR266 / DDR333 support @ 2.5v
  • 3GB maximum system RAM
  • AGP slot, 4x AGP compliant (1.5v support only)
  • 6 x 32-bit PCI 33MHz slots
On-board peripherals - I/O
  • 1 floppy port supports 2 FDD
  • 3 Audio Jacks for the CMI9738 sound chipset
  • CMI9738 6-channel sound
  • Davicom 10/100 LAN (10/100 Mbit/s)
  • 2 USB2.0 ports and a further 4 available via headers
  • PS/2 ports
On-board IDE
  • An IDE controller on the ICH4 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA/100/66/ operation modes
  • Highpoint HPT371 RAID single-channel ATA133 RAID controller
  • Ultra DMA/ATA133, 100, 66, 33 operation modes
  • Supports up to 2 hard drives
  • Serial ATA support via the Marvell 88I8030 single-ATA bridge
  • Supports 1 S-ATA drive
BIOS & Voltages
  • FSB speeds of 100Mhz - 255Mhz (quad-pumped)
  • 1.1 - 1.85v Vcore adjustable in 0.025v increments
  • 2.5v - 2.8v Vmem adjustable in 0.1v increments
  • 1.5v - 1.8v VAGP adjustment
  • Fix AGP/PCI speeds and variable settings

Jan 22, 2009 | Soyo SY-P4I 845PE Motherboard

3 Answers

VGA Compatible

this is the download link for the drivers

Jan 07, 2009 | PC Chips Motherboards

2 Answers

SOYO SY-7VBA133U cannot adjust CPU speed

Flashing the bios is the best idea to start with. This will upgrade to the newest bios, which normally adds more features and fixes some bugs.

There is a small chance that this motherboard just doesn't support overclocking, but the majority of them do.

Below is the link to soyo's site and downloads for your model number. There was 4 or 5 bios updates. I would get the newest one.

Hope this helps

Mar 21, 2008 | Soyo SY-7VBA133U Motherboard

Not finding what you are looking for?
Soyo SY-7VEM Motherboard Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Soyo Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers


Level 3 Expert

5660 Answers

Are you a Soyo Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides