Question about Sharp Wizard OZ-730

1 Answer

Sharp Wizard OZ-730 docking module

I have lost the docking module..where can I get one ??

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Sharp Wizard OZ-730 docking module

Found it here -
but it's $49.95! I have to keep looking around the house.

Posted on Dec 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i transfer a file from windows xp to a sharp wizard oz 730

You need the cable that came with the wizard. I think it is a serial cable. Then you need the software that came o a disk with the device. Does not matter, what port you use, serial or USB you always first need to install the software before you can connect it to the computer and work with it. Sometimes you still can fine the old software on the site of the producer of the device. (Sharp this time)

Jan 13, 2015 | Sharp PDAs

3 Answers

Transfer OZ-750 Data to Computer

Hi Pat,

and with the indulgence of otacon and Ekse...

You would need the Docking Module and the attached COM1 cable/plug.
You might find this page/document very informative if not interesting. Should you need the software (Day-Timer Organizer), it is available here. Additionally, a Q & A about OZ750 is here.

Hope this be of additional help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 04, 2008 | Sharp Wizard OZ-730

2 Answers

Is there an online manual for this device?

Here is a link to the download of the manual online.
Hope it was helpful?

Feb 26, 2011 | Sharp Wizard OZ-730

1 Answer

Looking for software for OZ-730. Found that is no longer an accessible site.

CALL 803-736-4382 they have software and sharp organizers.The wizardshop can help you with ALL your Sharp Organizer needs.
Cords,software for Windows XP and 7. They have Sharp OZ-730,OZ-770 and YO-520. They also repair ALL Sharp organizers with a keyboard.

Nov 29, 2010 | Sharp Wizard OZ-730

1 Answer

Is there any way to interace with USB

You will need 3 items to interface your Wizard with a USB port.

1. A generic USB to RS-232 adapter cable (with 9-pin serial connector, to match the connector on the OZ-730 interface cable).

2. A USB to RS-232 driver for the above cable. (If you have Windows XP: HL-340.EXE, contained in 111.rar, which can be downloaded from If you have another version of Windows, or if you have Linux, you will have to consult the documentation on to find the correct driver.

3. Software to communicate with the Wizard. You should be able to use the software that came with it, or purchase RuppLynx, or download Microsoft ActiveSync or a similar free program.

I used a cable I purchased on ebay, the HL-340.EXE driver installer, and RuppLynx software to connect an OZ-730, an OZ-570, and a Zaurus 5800 to my Windows XP laptop without any problem.

Nov 13, 2010 | Sharp Wizard OZ-730

1 Answer

Where can I get a synch cord for a OZ 730

call 800-828-9888. It's a company named Accesserall.

Aug 16, 2010 | Sharp Wizard OZ-730

1 Answer

Sharp OZ-730 sticky keys

I have a a Sharp yo-480. I've fixed sticky keys many times. I back-up data in the organizer first. (yo-480 doesn't have a flash memory) then carefully dissasemble unit. Lift out rubber keypad and use WD-40 to wipe circut board and keypad. It's the sticky residue that makes the keys stick

Nov 16, 2009 | Sharp Wizard OZ-730

1 Answer

I have an OZ-730 sharp wizard and it will not turn on, batteries are new and i tried the reset button. last time i used it the screen went black and then it turned off? help

Be sure the batteries are in correctly and are good, be sure the battery switch is back to the "normal position" - also it may have to be reset to work again - here is the instruction manual for doing that , page 7 chapter 1:

Sep 17, 2009 | Sharp Wizard OZ-730

1 Answer

Sharp Wizard OZ-730

Hi, I has this same problem but I found in the user manual this instructions and works ok: 1. Press and hold the Start key.
2. While holding down the Start key, push the RESET button
on the bottom of the Organizer using a pen or some other
pointed object. The following message will appear.
"Do you really want to initialize the organizer's memory (this will delete all data)? Yes:[ENTER/No:[ESC]
3. Press to initialize the Organizer.
The message .Working... Please wait.. appears while the
Organizer proceeds with the initialization procedure.
The Welcome message then appears.

Dec 25, 2007 | Sharp Wizard OZ-730

Not finding what you are looking for?
Sharp Wizard OZ-730 Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp PDAs Experts


Level 2 Expert

224 Answers

Lawrence Oravetz

Level 3 Expert

7053 Answers


Level 3 Expert

93738 Answers

Are you a Sharp PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides