Question about Timex Expedition 40141 Wristwatch
How do set the alarm on my Timex expedition watch? I cannot understand the instructions that came with the watch.
Press MODE (lower left) button until "ALARM" appears in the display. Then press SET (lower right) button. T1 should flash to indicate you are setting an alarm for Time 1. Press MODE to cycle through the alarm settings. Press ALARM (upper right) button to advance the hours, tens and minutes to the desired time. When the far right of the display is alternately flashing "T1" and then "AL" you can change the chime and alarm tones by pressing the ALARM (upper right) button. The alarm is on if the middle symbol (lines) on the left of the display is shown. The hourly chime is on if the lower symbol (bell) on the left of the display is shown. When you are done, hit MODE (lower left) again to return to normal time display.
Posted on Aug 18, 2008
Tips for a great answer:
May 04, 2012 | Timex Expedition Watches
Sep 07, 2011 | Timex Indiglo Analog Watch
Apr 28, 2011 | Timex T41101 Metal Outdoor Expedition...
Timex has two ways to find information about your particular watch. If you don't have the manual, Try this link:
Complete Timex link site:
Now, look up the model number, or if you cannot find that, check the three-digit Module Number from the back of the watch. Click on it in the Module Table, and download a PDF of your watch setting-instructions/manual.
I hope this helps you. Thanks, Bill
Sep 05, 2010 | Timex Expedition 84601 Wristwatch
Jun 02, 2010 | Timex T41091 Expedition Watch
Feb 08, 2010 | Timex Expedition 84601 Wristwatch
May 26, 2009 | Timex Watches
385 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: