Question about ASUS M2NPV-VM Motherboard

2 Answers

Hp pavilion dx8210us notebook

When boot the computer screen stay black one beep and two shorts. ok then take a xp windows home and run it from boot, it boot put the first files in and when goes to start windows a blue screen come up with an error
jrql_not_less_or_equal stop 0x0000000A [0X5886BC29, 0X00000002, 0X00000000, 0X80888164] MY E-MAIL ADDRESS IS if you can help me i would thank you so much.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers
Re: hp pavilion dx8210us notebook

1 Long beep & two short beeps. AMI BIOS beep code.
Either the video card is bad or needs to be reseated. I suggest the later. Remove the video card, clean slot and card & reseat.

Posted on Dec 23, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 95 Answers
Re: hp pavilion dx8210us notebook

Check the ram on board, reseat it and try again. Sounds like a memory problem to me.

Posted on Dec 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Cpu on but no video no beeps

There is likely a hardware-error.
1) Did you connect all powerconnectors correctly to the motherboard ?
2) Same question for attached internal hardware ?
3) Memory modules inserted correctly ?

If all OK, it's seems you PC is correctly booting and running succesfully an operting system like Windows.
Now, the error might occur something between monitor and PC.

4) Did you recently change the screensettings under Windows ?
If your monitor can run max. 1024x768-mode, but you accidentally fiddled with Windows-settings, to set it into 1200x900-mode, your monitor will turn black, not showing anything of Windows. In panic you might have turned of your computer. To solve this, it's best to push the F5-key when booting in Windows safe-mode. Here you can restore the older screen-setting.

5) No damage at pins of connectors between monitor and PC ?
6) Cable between monitor and PC connected correctly ?

If all OK :
7) Does monitor power on ?
Yes. Shortly but turns off within seconds (for TFT-monitors)
- Something at inverter-level is damaged. This is inside the monitor.
No. monitorLED is not even turning on
- Monitor has an internal defect

Oct 14, 2013 | Motherboards

1 Answer

Blue screen when usb plugged in to new board old xp home

1.) Ensure XP is updated with latest device drivers
2.) Ensure latest chipset & motherboard drivers are installed
3.) Check USB drive, and USB port
4.) Boot up with any Linux OS Boot up disk and check if USB is working
5.) Install Windows 7 in case new drivers not available on XP

Feb 26, 2013 | Motherboards

2 Answers

Laptop is having trouble booting up.

HP Limited Warranty Service Enhancement - HP Customer Care (United ... If you own an HP Pavilion dv2000, HP Pavilion dv6000, HP Pavilion dv9000 or Compaq .... Willthere be a future BIOS release that does not make my notebook fan remain ... Black Screen Error Messages that may Occur During Startup or Boot ...

Apr 05, 2010 | HP 417035-001 - HP Pavilion dv2000 Series...

2 Answers

When my computer starts up after the windows logo loading screen the screen turns black and then my keyboard and mouse stop responding and the screen stays black thats it

Press F8 key after post boot screen and before windows booting, dos screen will come from there select safe mede booting, computer will boot in safe mode

1) Click On start
2) Go to All programs
3) Go to Accessories
4) Go to System Tools
5) Select system restore

Sytem restore window will come there you will select restore my computer to the earlier time, you will get calender on the screen there you have select any highlighted previous date

After restart your computer will be ok.

Apr 01, 2010 | ASUS P4B533-VM Motherboard

3 Answers

My HP Pavilion dv6000 is giving me a long beep then 2 short beeps when i turn it on. I cleaned it out and it worked for a few minutes but when i restarted it the beeps returned

If your system board fixed but come trouble again.

Sometimes flex power cable problem too.
Check out internal your system.
or Mainboard problem. video chipset.

Oct 07, 2009 | HP Pavilion dv6000 dv6100 dv6200 dv6300...

1 Answer

Takes a day to boot up

reinstalling windows would be the best solution here.

Mar 12, 2009 | HP 417035-001 - HP Pavilion dv2000 Series...

2 Answers

Windows XP not starting after power outage

I have just in fact a few days ago came across a similar issue. As to whether or not your hdd needs to be replaced is uncertain. What I can tell you is it seems as though the MBR or master boot record has become corrupt or one of the reader arms inside the hdd has failed.
Refering to the corrupted theory, may be simply fixed by booting off of a win xp cd and reformatting your drive and reinstalling windows after the format.


In my case even booting off of a xp cd did not resolve the issue, every time anything would attempt to read from the hdd the computer would reboot. I suspected hdd failure at first, but this was not the case. It turns out it was a virus that infected the ntfs.sys and the MBR and put a binary code into those 2 files to reboot the machine.

Luckily at work (IT industry) I have a norton ghost server and was successfull at reimageing the hdd, doing so erases the MBR and everything else for that matter and rewrites it. However in doing so I lost all data that was on the hdd to begin with.

If you are not very tech savvy I would probably recommend hdd replacement however since you do have a HP which was prebuilt with xp, you don't have a xp install cd and thus unable to reload windows. I recommend finding a friend that has the xp install cd or you will have to go to the store and buy XP.

Nov 19, 2008 | ASUS P5PE-VM Motherboard

1 Answer

Blank screen after xp welcome screen no power to keyboard

Ok, with your current set up, what beeps are you getting? Also, while you have a blank desktop, hit CTRL+ALT+DELETE and you'll have Task Manager come up, click File and then New Task and type in "explorer" without quotes and hit enter. That should restore your desktop. Let me know how it goes.

Sep 07, 2007 | Asrock K7VT2 Motherboard

Not finding what you are looking for?
ASUS M2NPV-VM Motherboard Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers


Level 3 Expert

2598 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides