Question about Behringer DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm Counter

1 Answer

One side is louder than other - Behringer DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm Counter

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

You have had a pre amp or final amp go out. If you have any electronic background, you can open the unit up and compare the voltages on the side that is working and find the problem with the other side. Most of these stereo boards have the same componets one side that is on the other. Hope that makes sense. Hope this is helpful.

Posted on Nov 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Marshall 210h After using 15-20 minute increasing hum louder to louder. and big tubes goes very hot and colour going full red . what would I do?

Possibly the tube heater power supply is faulty. It will need to be professionally repaired.

Other things to consider:

Faulty tube(s)

High frequency oscillation

Aug 19, 2015 | Marshall Music

1 Answer

How do i adjust the drum rhythm volume so it is louder than the tone settings

You ay have to edit a rhythm and save it as a "user defined rhythm". During editing the volume of each part can be defined with vol. level ranging from 0-127.

Please read the manual.
Metronome volume can be easily changed by just holding the metronome button.

Mar 22, 2014 | Casio Privia Px330 Px-330 88 Key Digital...

1 Answer

One key sounds louder than the others

Hi, This is very likely to be a dirty key contact.
If the loud key is not touch sensitive or by turning the touch off, if all the keys are the same volume then this points to a dirty key contact.
All the best, Chris the Fader.

Mar 08, 2014 | Casio Privia Keyboard Case

1 Answer

After a gig last night we tried our Marshall JCM 2000 DSL401and it had developed two noises without anything plugged in. The first is a transformer hum that I'd never noticed before and when standby is...

Likely the filter capacitors have a problem. Best to take this in for repair... it is ODD that there is noise with the standby switch is in standby... That makes no sense... In standby it appears that power is removed from the power amp high voltage so nothing should come through the speaker... Unles maybe one off the power tubes had a total meltdown which should have blown the fuse.

Sep 10, 2011 | Marshall Amplification Marshall Cover For...

1 Answer

Is there any way to make the hb15tsk louder acoustically,I love the guitar.

In a word, NO. Changing type of strings might make it a bit louder, however the sound quality would drastically change if it does. Best to leave alone... Get a small amp, portable battery if needed... OR there are headphone amps that are designed to be used for practice.

Sep 02, 2011 | Washburn HB Series HB15CTSK Electric...

1 Answer

Serial number 00-06778552, a gig amp manufactured about 1977/78, (used in an American tour in 1978). While running a practice session at low volume, the yellow DDT light blanked altogether (this has been...

The amp has a failure. One side of the power amp is starting to draw excessive current to the point that the filter caps can't sustain the current so the ripple starts to be heard in the speaker. Continued use MAY burn up the speaker by sending DC through it as well as causing additional damage to circuit boards, etc..

May 25, 2011 | Peavey Max 115 1x15 Bass Combo Amplifier,...

1 Answer

Right speaker sounds louder than left thanx

Besides checking balance, cables and length of cables can cause that. If cable is weak, or if one side is longer than the other, you'll get that effect

Feb 28, 2011 | Alesis M1 Active 320 USB Speakers

1 Answer

On u47 a=cl +mod b=od on the screen the sound comes out one headphone speaker a lot more louder than the other all the leads are ok the headphones are ok and the balance is set in the middle is this normal...

This is far from normal. What may be the problem is a component on the circuit board itself. You may have to take this to someone who has a multimeter to test and see which one it is (this may take a while, since there are a LOT of small components). If you don't want to (or have the money to) do that, you can just set the balance to the opposite side of the louder speaker until it sounds even out of both channels. Eventually, though, something will have to be fixed.

Hope that helped!

Feb 10, 2011 | Roland Boss Gt-10 Guitar Effects Processor...

Not finding what you are looking for?
Behringer DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm Counter Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides