Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

C350 malfunction code c-0501

Konica minolta bizhub c350 malfunction code c-0501 after replacing fuser unit

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

After replacing the fuser unit, if you got a c0501 code you must open the front door where the toner is. On the right side (hinge side) next to the black toner and drum unit there is a plastic pannel/cover. In the lower portion of that pannel there is a hole where a trouble reset switch is loacted. With a flashlight you may be able to see it. You are ment to use a thin screw driver or the like to push the button. You do this while the machein is on and desplaying the code. As soon as you press the button the copier will clear the code and start warming up. Thats it! If you are un certin of the button placement you can take out three screws from the pannel and loosen one screw from the pannel above it and and pull the pannel off the unit. You will see the board and it is the button on the (left), as there are two of them. Tho you only have access to the one thru the cover.

Posted on Oct 18, 2009

  • Craig Rieder
    Craig Rieder Mar 27, 2014

    thanks alot sorted :)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bizhub C350


Fan located above the fuser unit the hot part is burned out or very dirty and can not turn

Jan 29, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error c-0200


konica minolta bizhub malfunction detected error code c-0200

Sep 01, 2012 | Konica Minolta bizhub 350 All-In-One Laser...

3 Answers

Konica minolta bizhub c350 error codes c-0510


eror code c-0098 meaning ??????????????pls tell me the solution

Jul 31, 2012 | Konica Minolta Bizhub C350 Digital Copier,...

1 Answer

How to fix C-0500 error for BIZHUB C350 konica minolta printer


Open the front door with the machine on, get down on the floor and look up on the right side of open area there is a slanted section in that slated section is a small hole you will not see it standing! With a small screwdrive gentle push the small switch located in side the hole that will reset the code if it comes back DO NOT RESET the copier is telling you something is wrong with the FUSER UNIT the HOT part continued reset might catch the machine on fire and that would ruin a perfectly good day. Have a qualified Tech look at it from Konica Minolta.Check this web site out for a rough idea of cost to replace the fuser.

Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Jan 31, 2012 | Minolta Office Equipment & Supplies

2 Answers

Konica minolta Bizhub C350. Following message appeared on my printer: Malfunction detected. Please call your Technical Representative and provide code: C-0F36 What does this code mean?


Hi katienash,

C-0F36 on the bizhub C350 means the machine has registered a really low toner density in the Black
Imaging Unit. I'd take the unit out, give it a shake and pop it back in. Also worth checking you have some Black Toner in it.
Good luck

Regards

m-press.biz

Jan 25, 2011 | Konica Minolta Minolta Printer stand...

4 Answers

Put in newer fuser unit but machine still says to replace


If you want to clear the fuser message you have to be sure you replaced the fuser web. Then go to 25 => counter clear(items 13)=> Clear fuser counter or 36=>counter clear(items 8)=>Clear fuser counter.

May 28, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

3 Answers

Konica Minolta Bizhub c350 error code c-0510. What is it? How do I fix it?


C0510 Upper fusing roller abnormally low temp


replace the thermistor in the fuser

Sep 25, 2008 | Office Equipment & Supplies

1 Answer

Error code on Konica Minolta C350


There is not a C0876 listed in the service manual. Perhaps it's a C0B76 - Finishing option Punch Unit Board Malfunction.
CAUSE: The shaft on which the gear rides is deformed. The punch unit cannot be driven from front to rear.

SOLUTION: Reform the shaft toward the punch unit rail. This will allow the drive gears to mesh properly so the punch unit can be mechanically driven from front to rear.

Aug 28, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Copier malfunction


Code C0F36 is a low toner density error on the black developing unit.

Was it asking for black toner before this code appeared?

Feb 10, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

751 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...