When I put a sale of 1.00 and hit taxable it prints -1.06 when I hit subtotal, then i pt 2.00 and hit CA AMT Tend it puts 3.06 and the drawer opens. it should be .96 change???

tax setting for pcr t290 Google Search

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

1)Maybe you need to open the keyboard and clean it. It is possible that you subtotal and cash button are registering as Deptments
2)Or you key is not on Reg

Casio TE2200: Key To PGM, Press 3 then Subtotal, 0125 Subtotal ( this sets tax table 1, 0225 will set table 2 etc), 6.725 CA/Amt Tend (insert your rate here), 0 CA/Amt Tend, 5002 CA/Amt Tend (this sets to Fraction Round Off and Add On Tax), Subtotal

It sounds like you have programmed the CASH button. Try this:
Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL Turn key back to REG and try it.

-----------------------------------------------------------------------------------
If anyone is looking for a Casio TK-1300 manual, http://the-checkout-tech.com/manuals/cashregisters/Casio_TK-1300_and_CE-4200_and_CE-4250_programming_manual.html

To enable edit Company Name
1. Key turn to PGM
2. Press [5] [Subtotal]
3. Press [3][2] [Subtotal]
4. Press [4][2] [CA/AMT TEND]
5. Press [Subtotal]
6. Press [3] [Subtotal]
7. Press [2][1][2][2] [Subtotal]
8. Press [1][7][7][0][7][0][0][0][0][0] [CA/AMT TEND]
9. Press [Subtotal]

Edit ur company name
1. Press [2] [Subtotal]
2. Press [1] [3] [2] [Subtotal]
3. Input Your first line of Company Name (Max 16 Characters)
4. Press [00] [CA/Amt TEND]
5. Press [2] [3] [2] [Subtotal]
6. Input Your second line of Company Name (Max 16 Characters)
7. Press [00] [CA/Amt TEND]
8. Press [3] [3] [2] [Subtotal]
9. Input Your third line of Company Name (Max 16 Characters)
10. Press [00] [CA/Amt TEND]
11. Press [4] [3] [2] [Subtotal]
12. Input Your fourth line of Company Name (Max 16 Characters)
13. Press [00] [CA/Amt TEND]
14. Press [Subtotal]
15. Key turn back to REG1
16 Done

TO PROGRAM TAX PERCENTAGE:
1. TURN KEY TO PROGRAM
2. PRESS 3 ON AMOUNT KEY PAD
3. PRESS SUBTOTAL
4. PRESS 0125 OR 0225 & SUBTOTAL
5. PRESS TAX % WITH DECIMAL POINT (EX. 8.25) AND PRESS CA/AMT TEND
6. PRESS 5002 AND CA/AMT TEND
7. PRESS SUBTOTAL

You're right, the manual is terrible but I think I got it worked out...
Turn to PGM mode.

• Press 3 then subtotal button.
• Press subtotal button again.
• Then endter tax rate (if even enter two digits 05 for 5%, if more enter 4 digits like 5.75 *5+.+7+5 for 5.75%) and press ca/amt tend button
• Press 0 and press ca/amt tend button
• Press 0125 and press ca/amt tend button *this is for rounding/tax table code not positive on this one but looks like the right entry for "add on" tax
• Press sub total button

This should change your tax

Hi.
You might have compulsory amount tend turned on.
If you press SUBTOTAL, then type in the amount on the display (no decimal point), then press ca/amt, does it work? If not, then you may have mucked up the cash button settings. Does it work if you use another payment type like CREDIT CARD?

I'm in Australia and only going on the program manual for your area, it states that canadian tax is tax on tax? if this is true then you probably entered a code for add on or add in tax and thereby changed it all.

you need the following

tax table address
1 125
2 225
3 325
4 425

rounding off codes
rounding off to 2 decimal places is 50
rounding up to 2 decimal places is 90
cut off to 2 decimal places is 00

tax system code
tax table with out tax rate 01
tax table with tax rate and add on rate 02
add in tax rate 03
Canadian tax-on-tax rate 04

starting point
to get the starting point you multiply by 100 and subtract 1
eg 50 cents = 0.50 X 100 - 1 = 50 - 1 = 49
eg $4 = 4.00 x 100 -1 = 399

to program the tables go through these steps

go to program 3
tax table address eg 125
subtotal
tax rate
ca/amt tend
starting point eg 0.50 = 49
ca/amt tend
rounding eg 50
tax system eg 04
ca/amt tend
ca/amt tend

here you have 2 choices,

press ca/amt tend to go to the next tax table ie 225 and start over by entering the tax rate and go through the procedure again

or

press subtotal to finalise the tax table you are on

Hope this helps,

Adam