Question about Remote Controls
I lost my manuel for the innovage jumbo remote. I need the codes for a philips tv. Can you please help?
I have a sharp tv and lost my booklet for the codes can you help it an innovage universal remote thank you
Posted on Dec 01, 2008
I need a code for an emerson tv
Posted on Jun 02, 2009
I have found the iWave, Innovage, and generic "JUMBO" are the same remote.
Here is the link to the manual. It looks like it has a easy to do auto-search button.
Posted on Dec 17, 2009
Posted on Nov 10, 2010
Orion tv is 192
Posted on Sep 18, 2008
For Visio and the Jumbo Remote - 004 worked for me.
Posted on Aug 04, 2010
RE: Solution #2: Guest; "SCAN INDTRUCTIONS" ... Thanks, the INNOVAGE -Jumbo URC had my Toshiba TV and my LG combo DVR-VCR combo codes included. I re-confirmed these codes by your correction to the listed CODE SEARCH SCAN instructions. Then I used this method to locate the proper code for my Direct-TVR R15. The Jumbo URC tried about 20 minutes or so (Blinking with each code it found) before it finally gave up. A set of codes were included for Direct-TV. None of the listed codes worked for my R15 device. The Direct-TV website list other manufacturers for many devices, but my R15 is listed under Direct-TV only. HELP! Jumbo URC codes for D-TV R15!!!
Posted on Sep 05, 2008
I need codes for a panasonic tv
Posted on Sep 25, 2010
I have a innovage jumbo universal remote do you have the code for a baird lvd tv
Posted on Feb 21, 2010
I have a Fisher TV could you give me the code?
Posted on Oct 15, 2008
Posted on May 17, 2008
Try this website, i specifically found the Innovage jumbo remote codes here, but if you scroll down it has several remote codes listed by manufacturer of the remote. Hope it helps!!
Posted on Jan 03, 2008
My Morotola cable box was not listed in the manual. So, I had to scan for the code. Problem was, the SCAN INDTRUCTIONS in the manual were INCORRECT. Evidently they were written for a prior version of the Jumbo. They say to press the ON/OFF button "REPEATEDLY" to scan from one code to the next. NOT SO! Only press it once to start the scanning sequence. The red LED will blink all by itself for each code attempted. Wait for the selected device (TV, VCR, etc.) to power off, then press the ENTER button IMMEDIATELY, before it steps to the next code. This captures the last code attempted, the one that shut down your device.
If your LED does not blink repeatedly all by itself, then you can assume you have an old versin of the Jumbo. In that case, follow the instructions and press the ON/OFF button yourself for each new code you want to try.
Remote control help sites are full of requests by frustrated buyers looking for help. I gave the Jumbo a low rating because of the erroneous manual and the incomplete code list.
Posted on Dec 21, 2007
I can't find my instrushuns
Posted on Oct 28, 2010
Tips for a great answer:
May 03, 2016 | Innovage Jumbo Universal Remote Control
Jun 20, 2011 | Innovage Jumbo Remote Control
Sep 29, 2009 | Innovage Jumbo Remote Control
Sep 27, 2009 | Innovage Jumbo Remote Control
Aug 10, 2009 | Innovage Jumbo Remote Control
Dec 18, 2008 | Remote Controls
Mar 03, 2008 | Remote Controls
Nov 24, 2007 | Philips Magnavox Learning Universal Remote
46,243 people viewed this question
Usually answered in minutes!