Question about Microsoft Windows Vista Home Basic Edition for PC

2 Answers

6TO4 adapter has a driver problem

I have wista black edition,can anyone help me?

Posted by on

  • pcc1_ekp May 11, 2010

    I cannot find my wireless mac address in my ipconfig /all, can't connect to the internet and my network adapter has yellow mark in my device manager.I am using window vista Home premium. Pls can any one help me.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Ikkenom is a *******, simply reformat your hard drive then, install a real version and or older version of windows. once you reformat your hard drive, it gets rid of everything on it, you will need to create a partition followed right after. depending on the version of windows you may have to

type in the following

fomat C

with vista follow the prompt of the cd.

or switch to linux, be cause it is immune to viruses because no one has been able to develope a virus for linux, most hackers and companies that create viruses to malware target windows. check into ubuntu desktop, slackware or Xandros linux desktop


it is also suggested that you back up your valuables "pictures and documents" on a external TB or USb drive.

Posted on Dec 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

The "black" edition is a BOOTLEG copy of the copyrighted Microsoft Vista operating system, and it contains some computer-viruses.

So, NOBODY can help you get the viruses out of the "black" edition.

Posted on Dec 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not pair to my computer.


If you see this status associated with a Microsoft 6to4 Adapter on a computer running Windows Vista in a home environment, you may be able to uninstall the 6to4 adapter to resolve the problem. To uninstall the 6to4 adapter, right-click it and click Uninstall. After you uninstall the 6to4 adapter (or if the problem is not associated with the Microsoft 6to4 adapter), it may also be helpful to run an automated troubleshooting service from the Microsoft Support Web site (http://go.microsoft.com/fwlink/?LinkId=192795).
If your computer is part of a business network, consult your network administrator for the most appropriate action. There may be company tested drivers for your computer or there may be other considerations before you disable any IPv6 components.

Jan 18, 2016 | Computers & Internet

1 Answer

Repair microsoft 6 to 4 adapter on a toshiba satillite l355-


One solution is to uninstall and reinstall the device driver in the device manager.

To do this, press the Start button, then right click on the "Computer" entry, and the "Manage" entry.

Double click on "Device Manager" and find the 6to4 adapter. Right click and select "uninstall"

Restart your computer.

In the Device Manager again, in the top bar select "Action" then "Add Legacy Hardware" then click next. Select "Install the hardware that I manually select from a list" > Network adapters > Microsoft > Microsoft 6to4 Adapter. Then click finish.

Restart again.

If this does not fix the problem, disable the error by opening the start menu, typing in "cmd", right click and "Run as administrator".

In the window that pops up, type
netsh in 6to4 set state disable

then press enter. And restart your computer.

Oct 08, 2013 | Toshiba Satellite Computers & Internet

1 Answer

I need to reinstall microsoft 6to4 adapters


microsoft 6to4 adapters? Not sure I know what that is?

Dec 01, 2012 | Computers & Internet

1 Answer

What is the driver for microsoft 6to4 adapter #8


Hi Friend,

6to4 adapter is a component used for transmitting IPv6 packets trough IPv4 network correctly.


In some scenarios, there will be a code 31 or code 10 error appearing beside this component. A possible reason is, the network adapter doesn't support this feature. You may update the driver for your network adapter or chipset, and then try to Uninstall and reinstall the this component.


To Uninstall the component, right-click the item in Device Manager and select Uninstall.


To reinstall the component, in Device Manager, Action - Add Legacy Hardware - Next - "Install the hardware that I manually select from a list" - Network adapters - Microsoft - Microsoft 6to4 Adapter - Next - Finish the wizard.


If the steps above doesn't solve the problem, your network adapter is not a supportive one for this component. You can completely ignore this error, if there isn't IPv6 network deployed in the environment. The error won't affect your system.


To remove the error message, please right-click the Command Prompt and run as administrator, type the command netsh in 6to4 set state disable, press Enter. The component will be disabled and hidden.

Regards
Chiranjeet

Sep 17, 2010 | Computers & Internet

1 Answer

6 to 4 adapter no working and 1 Sat adapter #2 adapter not on, so I cant connect to internet, how can I fix this


I would like to bring to your notice one of the issue that came across with a Vista based PC of a EU who reported in his mail that in "Device" manager their are 6 to 4 adaptor is listing by name itself and for this he is unable to install any drivers as it is showing that the drivers are not installed for it. Even though EU is able to browse the internet.

Normally the above issue is related to TCP/IP transmission protocol that uses by Vista. As Vista by default support IPv6 TCP/IP protocol for data transmission over the network. 6to4 adapter is a component used for transmitting IPv6 packets trough IPv4 network correctly. If the drivers for this component is not properly installed or corrupted there will be a code 31 or code 10 error appearing beside this component. You may update the driver for your network adapter or chipset, and then try to uninstall and reinstall the this component as mentioned below. I am enclosing a snapshot of the issue along with the mail so that you can also have a clear idea of the issue.

=======Uninstalling 6to4 Adaptor==========

1. Click on Windows icon, and enter device manager into the Start Search field.
2. Right Click on all 6to4 adaptor and select uninstall from the droplist.


=====Reinstalling 6to4 Adaptor===========

1. Click on Windows icon, and enter device manager into the Start Search field.
2. From the device manager window select "Action".
3. Select "Add Legacy Hardware".
4. Click on Next.
5. Select "Install the hardware that I manually select from a list".
6. Select Network adapters from the window.
7. Select "Microsoft" from left window.
8. From right window select "Microsoft 6to4 Adapter"
9. Click on next and finish the wizard.


After performing the above steps issue shoule get resolve. If the issue persist then, I request you to disable this device in device manager. By disabling this it will not effect your internet browsing or your wireless conectivity, as Microsoft also confirm this in their database. In order to disable this device perform the below said steps.

1. Click on Windows icon.
2. Select Accessories.
3. Right click on "Command" prompt.
4. Select "Run as administrator".


Once the command window open, type the below said command.

netsh in 6to4 set state disable

After typing the above command press enter key on the keyboard.

After performing the above steps restart the PC.

Apr 05, 2010 | E-Machines eMachines Desktop PC

1 Answer

6t04 code 31


To solve this problem with 6To4 adapter device with code 31, make sure you do the following:
1). Make sure you have all the updates installed for vista, such as, Important and Recommend updates.
2). [Right Click] my computer icon, and select (properties).
3). Select (Device Manager).
4). [Right Click] on the 6To4 icon, and select (Update Driver Software).
5). Click [Browse my computer for software drivers].
6). Click [Let me pick from a list of device drivers on my computer].
You should see the Microsoft 6To4 adapter listed?
If not you must uncheck the [] box show compatible hardware.
7). Then scroll down the list of Manufacture until you find (Microsoft), NOT Microsoft Corporation!
8). Click on (Microsoft) as the Manufacture and scroll down about two clicks, you should see 6To4 adapter.
9). [Left Click] on Microsoft 6To4 adapter and (Click Next), it should load the drivers as normally.

Dec 04, 2009 | Dell Inspiron 1545 Notebook

1 Answer

Microsoft 6to4 adapter. Device cannot start code 10 error


try uninstalling these devices remove anything conected to laptop and restart. might help

Dec 03, 2009 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

6to4 adapter not working...


Check the device status under the Device Manager. if the status of the device was just "drivers were not installed..." you may simply click on update driver button on the same window. If the error is code 10 or device could not start, the problem has something to do with the hardware. call the manufacturer of your laptop and check the warranty if it is still covered.

Jul 16, 2009 | Enterasys Network adapter

Not finding what you are looking for?
Microsoft Windows Vista Home Basic Edition for PC Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...