Question about Hobart 42 in. AM14C-154 Free-standing Dishwasher

1 Answer

Rinse spray stays on after cycle. Control box displays "rinse", it appears to finish, but water still comes out of the top spray head.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Removed the solenoid assy, loosened the valve assy a little and re-tightened. The valve now works. Next step is to dis-assemble the valve and try to clean it out.

Looking for a replacement part, but the AM14 model is old and parts are hard to find. The specs say its a 20-30 V coil and the AM15 appears to use a 115V part.

Possibly the o-ring inside the valve can be replaced. I did notice that blackish water came out of the valve assy when I looosened it.......

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need info about extra rinse cycye


there should be agitation..dont know unless its not making the connection in the control head..

Jan 08, 2014 | Maytag Ensignia MAV2757AWW Top Load Washer

1 Answer

Fills with water, skips wash and rinse cycle, starts spin cycle and sprays water out of the top


I would look at lid switch on this model and plunger to lid .Under lid is spray flume that can be damaged by large loads ,check that close. put it in wash full and drop lid hard it may come on.

Nov 19, 2013 | Maytag Dependable Care LAT9206

1 Answer

Hobart LXIH stuck in Wash mode after running multiple loads. Shutting off breaker for several hours fixes problem until multiple loads have been run again and then it is once more stuck in Wash mode.


How long does it stay in the wash cycle? Indefinitely? Does the display continuously show "WASH"?. If it stays in the wash cycle indefinitely (i.e. continuously shows "WASH" for significantly beyond approx. 3 minutes), it's probably a control board malfunction. If it continues to wash after the "WASH" indicator goes out, it could be a shorted wash motor relay on the relay board or a fauly control board.

If the internal rinse water booster heater doesn't reach it's programmed setpoint temperature in time, the dishwasher will run an extended wash cycle to give the booster heater more time to finish heating the rinse water. If this is what's happening, the wash cycle would last approximately 3 minutes, then it would rinse regardless of whether the booster heater has finished heating or not.

The booster temperature thermistor may be bad, giving a false booster temperature reading, causing an extended wash cycle as described above. The booster heater elements or contactor may be bad, preventing the booster heater from heating and reaching proper temperature, also causing the same extended wash cycle to give the booster more time to heat.

Jan 06, 2011 | Hobart 24 in. LXIH-3 Built-in Dishwasher

1 Answer

Washing machine displays an LF error code. Started last week during whitest whites cycle in rinse. I cancelled and just did rinse to finish my load. All other cycles worked and yesterday all started...


LF = Long Fill

LF flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change.
Is water supply connected and turned on?
Are hose screens plugged?
Is water entering the tub? If so check pressure hose connection to machine/motor control.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 07, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Jackson high temp door style. Very hot water continues to spray from the rinse arms after the dishmachine has finished its cycle. Very hot water will spray from the rinse arms even when the dishmachine has...


1)Temperature is more than 90-100degree means the steam will comes from the rinse arm automatically (as u indicated thermostat chances is there)
2)check the heater contactor is getting switched off interminently(if it is not getting off problem on thermostat)

Jan 08, 2010 | Jackson Dishwashers

1 Answer

Whirlpool Calypso Washer


at this point i hate to do this but if yo want a free replacement you have to contact whirlpool. this was involved in a class action lawsuit and they are making the repairs for free. otherwise replacing the pump is simple and you can get them off ebay for really cheep. :)

Jun 29, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

3 Answers

Jet spray nozzle not spraying water.


If no water is coming out at all, it might be that the inlet filter is clogged or the Est. time shows the code IE. To clean out the inlet filters, unplug the washer, turn off the water, open the valves, take a filter cap thing and try rinsing it out. To put it back to operational use, reverse the steps above.

Mar 26, 2008 | LG WM2688HWM TROMM SteamWasher

Not finding what you are looking for?
Hobart 42 in. AM14C-154 Free-standing Dishwasher Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Dishwashers Experts

Jason

Level 2 Expert

211 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Garth Jackson

Level 2 Expert

93 Answers

Are you a Hobart Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...