Question about Office Equipment & Supplies
Canon Pixma MP 110 5600 error
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The print heads on this printer are integrated to the cartridges. I would check the inside of the cartridge caddy, and make sure that all of the gold contact pins are exposed, not looking damaged, and that there are no tears on the film it is connected with. If you notice anything shady with that film, you want to do an RMA (Return to Merchant Authorization) so you can get a replacement,
Canon offers a 1 year upgrade warranty with all of its printers, which very few people use or pay attention to. This means that if you did not void this warranty by using remanufactured cartridges or freaked out the chips on genuine ones by refilling past 1200 prints, you will actually get the newest model (currently the Canon MP140)
Posted on Jan 08, 2008
SOURCE: error E 4, 2 canon pixma mp 160
E42 means scanner error. May require a hard reset(disconnect from power supply for 30 min). Otherwise may require factory reset procedure to be applied. Follow the steps below:
Mp160 Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s)
according to the function listed in the table below.
(Each time the Stop/Reset button is pressed,
the LED lights alternately in orange and green, starting with orange.)
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset procedures below.
5 times Orange Destination setting See Destination setting procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
Posted on Jul 09, 2008
I have a canon ip 1300 produces an error(both LED's are alternately blinking one blink for the green led and 5 blink from the orange led) then it will produce an error 5600.
Posted on Feb 24, 2009
Tips for a great answer:
Feb 12, 2013 | Canon PIXMA Office Equipment & Supplies
Sep 23, 2011 | Canon PIXMA MP210 Photo All-In-One Printer
Jan 19, 2011 | Canon PIXMA MX310 All-In-One Printer
Dec 27, 2009 | Canon Office Equipment & Supplies
May 02, 2009 | Office Equipment & Supplies
798 people viewed this question
Usually answered in minutes!