Question about Texas Instruments TI-84 Plus Calculator

Hello,

Here are screen captures to helps you set up your graphs. Notice the highlighted = sign. If there is no highlighting on the = sign the curve is not drawn. Highlight a sign and press [ENTER]

Here are the graphs. Functions are as in setup.

To change the style of the curve, left arrow to the left of the letter Y and press [ENTER]. Every time you press [ENTER] the style changes. Beware there is one in the form of an **unconnected bubble**. While you see the bubble when a point is being drawn, the whole curve will evaporate at the end.

Hope it helps.

Posted on Oct 01, 2009

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

Remove the battery and after 5 minutes put it again. Be sure to install the correct battery polarity

Mar 25, 2013 | Texas Instruments TI-84 Plus Silver...

Press 2ND [TEST] 1 .

Nov 21, 2012 | Texas Instruments TI-84 Plus Calculator

Try pressing enter after you put in the first equation, then put in the second equation.

May 09, 2011 | Texas Instruments TI-84 Plus Silver...

To solve this with a ti-84 press [math] and select solve from the menu. This will open the equation solver. Type in your equation

(Note: you may need to put it in the form with 0=, So the equation would be 0 = 2c + 6 +7c - 8 ). Then press

enter or arrow down button.

(Note: you may need to put it in the form with 0=, So the equation would be 0 = 2c + 6 +7c - 8 ). Then press

enter or arrow down button.

Mar 30, 2011 | Texas Instruments TI-84 Plus Calculator

Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Jan 08, 2011 | Texas Instruments TI-84 Plus Calculator

The following should help you draw several graphs.

When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.

If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.

If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

- Press the [APPS] key.
- Scroll down to the line that shows Transfrm.
- Highlight it and press [ENTER].
- In following screen you are invited to Uninstall or continue.
- Press the number to the left of Uninstall. Validate if need be.
- Return to the Y= editor to type in functions to graph.

Nov 10, 2010 | Texas Instruments TI-84 Plus Calculator

did you put one in each of 2 y =???

Also, check your window to make sure the numbers fit the x and y values in both graphs

Also, check your window to make sure the numbers fit the x and y values in both graphs

Mar 24, 2010 | Texas Instruments TI-84 Plus Calculator

Hello,

Use the [Y=] entry screen to enter the functions you want to graph. Make sure that the** = **sign after Y1, Y2 etc. is **highlighted** (black). If the = sign is not highlighted the corresponding function will not be drawn. You can can up to 10 functions, but what is the point of drawing so many if they overlap?

Anyway, to change the graph style of the curve for a particular function, use arrows to move to the line, then use left arrow to the bit of line that appears**to the left of the Y**. Highlight the segment an press ENTER. Each time you press ENTER the style changes to another one. Beware of the unconnected bubble style. During the drawing it will show the position of the point being drawn, but at the end, the whole curve, so to speak, evaporates.

As to simultaneous graphs, if it is important to you to have the graphs drawn for all the curves at the same time, you can enforce that by pressing [MODE], and using down arrow to reach the 6th line**Sequential Simul**. Use the right arrow to highlight **Simul** and press ENTER.

Whether drawn sequentially or simultaneously, all graphs will be displayed, except for the ones with the unconnected bubble as style.

Hope it helps.

Use the [Y=] entry screen to enter the functions you want to graph. Make sure that the

Anyway, to change the graph style of the curve for a particular function, use arrows to move to the line, then use left arrow to the bit of line that appears

As to simultaneous graphs, if it is important to you to have the graphs drawn for all the curves at the same time, you can enforce that by pressing [MODE], and using down arrow to reach the 6th line

Whether drawn sequentially or simultaneously, all graphs will be displayed, except for the ones with the unconnected bubble as style.

Hope it helps.

Oct 02, 2009 | Texas Instruments TI-84 Plus Calculator

i think there are programs but with something as simple as that you should be able to work it out manually....

3x+25-5x=5x-5x

-2x+25-25=0-25

-2x=-25

x=25/2 or 12.5

3x+25-5x=5x-5x

-2x+25-25=0-25

-2x=-25

x=25/2 or 12.5

Jul 05, 2009 | Texas Instruments TI-84 Plus Calculator

go to apps menu, go to transform app. click uninstall and go to y= screnn and should be a slash on the left and you should be able to graph more than one equation.

Aug 27, 2008 | Texas Instruments TI-84 Plus Calculator

78 people viewed this question

Usually answered in minutes!

×