Question about Hitachi 46F500 46" Rear Projection HDTV-Ready Television
This TV set I have seen in the past to have leaky CRT's This is where the cooling fluid that is located between the main lens and the CRT face leaks out onto the printed circuit board. You should have this set checked out ASAP or you will be doomed. If you let the cooling fluid stay on the printed circuit board too long, it will corrode the connections and then you will have to buy a new board, and that would really be an expensive repair. If it is not the fluid issue when you do have the set fixed, ask the tech to install a shield that Hitachi recommends to be installed inside the set, so that in the future, the tubes do become leaky, the fluid will run off to the side and not damage the electronics. If it is not a fluid issue you most likely have a bad flyback or the high voltage distribution block is bad. Good Luck, and let us know how you made out.
Posted on Dec 20, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 26, 2010 | Hitachi 46F500 46" Rear Projection...
Dec 20, 2009 | Hitachi 46F500 46" Rear Projection...
Aug 16, 2009 | Hitachi 46F500 46" Rear Projection...
Feb 03, 2009 | Hitachi 46F500 46" Rear Projection...
Dec 21, 2008 | Hitachi 46F510 46" Projection HDTV
Nov 17, 2008 | Hitachi 46F500 46" Rear Projection...
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: