Question about Jade RJDW2470A Free-standing Dishwasher

2 Answers

Door spring has gone slack and the door falls heavily. Any advice?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,361 Answers

Remove the bottom access plate. Reach inside and find the spring and re-attach it. If the spring is broken buy a replacement spring. There should be 2 springs,one on each side.

Posted on Oct 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Hello jakie7

did you check the Door cable. Replace both cables at the same time as they usually wear out at the same rate. Consider replacing door springs also as preventive maintenance.very easy to locate remove access pannel from bottom and look in there should be i cable connected 2 2 springs on each side usally after time the cable eye breaks try that and let me know
thanks
rob

Posted on Oct 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The oven door will not close .


i just had a similar problem .the door would fall and i had to lift the top of my door hinge to close it .I found that the pin on the door hinge spring had fall.en out . I installed it back and now it works the way it should.the spring should feel tight with no movement.

Mar 25, 2014 | Dacor MCS130 Millennia Electric Single...

1 Answer

How to replace door springs on lg model LDF6810ST


Found advice from another post for same prob..not tried yet says its not springs but spring cable, part #4933DD 3001B and 2 needed. Poster seem to know what he was talking about

Mar 02, 2013 | LG LDF6810ST Stainless Steel Built-in...

1 Answer

8572216


Falls open when? This unit wom't operate unless the door is secure so I assume you mean the door assist springs are disconnected or broken and the door just falls heavily to the open position after you unlatch it from the closed position. Try these, part 18 here

http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDI01FLSS3/0593/0130000/W0503111/00007

should attach to frame in an easy to distinguish hole or slot and to door hinges, number 2 here

http://c.searspartsdirect.com/lis_png/PLDM/W0503111-00001.png

Aug 27, 2012 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Something has happened to the door of my dishwasher when you open it it falls down heavily and now when I put the dishwasher on the door keeps opening



Hi,

The door springs or ropes have broken...


That is not that hard to fix and you can easily buy the parts yourself online...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

heatman101


Mar 16, 2011 | Dishwashers

1 Answer

Door handles slack feels like springs dropped so cant open door


You can release the catch from inside just keep trying and thern you need to replace the door catch itself this is a simple job

Jun 10, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My Liftmaster Formula 1 garage door opener has started to shut unevenly, making one side of the closed door slightly higher than the other. This leaves a gap under the closed door on one side. The door...


my friend had the same problem and yes that is what we did. It took a wile to set it evenly. Wouldn't think it would take long but it did. We inadvertently set them to tight and door wouldn't close it would reverse on itself because of the added tension. In the end we did get it though.

Feb 04, 2010 | liftmaster Chamberlain Garage Door Opener...

1 Answer

Door feels very heavy and falls open when not latched.


There are two springs attached to the door under the machine. They are attached to arms that extend down from the door frame. Turn off the electricity, remove the bottom inspection panel, in the toe kick area, and the lower decorative panel. Probably two phillips head screws in the toe kick panel and one at each top corner of the lower decorative panel. Remove all four.The broken spring is probably lying right in front. Take note as to the way the good one is attached. The manufacturer will have a replacement available, but the local hardware may be faster. Take the spring with you for a match. I would buy two if they have a close match and replace both. Don't buy a longer spring it will just fall off. Yes, a knowledgable handy woman can do this. I'm here on and off until 9 pm est if you need advice.

Jul 06, 2009 | Dishwashers

1 Answer

The oven door won't close properly, it just hangs slackly about 2 cm from the seal. it's a smeg wall oven.


the clips on these oven are canyilver type they can move out of position if opened abruptly .to refit correctly lift door upwards while pushing the bottom of the door inwards.you should feeel a strong resistance from the door springs.there should be a notch n the bottom of the hinge this should slot over the oven frame.if this does not solve the problem then the springs have probably gone on the hinges and will need to replace both hinge assemblies

Jul 11, 2008 | Smeg Kitchen Ranges

1 Answer

KitchenAid Dishwasher KUDSO2FRSS


I recently had the same problem. One of the cords that attaches the door to a spring had snapped. I purchased cord replacments at the following URL and completed the repair myself. http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=1059756&PPStack=1

Good Luck, Tim K.

Jun 30, 2008 | KitchenAid 24 in. KUDS02FRSS Stainless...

1 Answer

Oven Door Doesn't Completely Close


no adjustment. probably needs new hinges - hinge spring gone slack

Mar 10, 2007 | Miele Novotronic H350-2B Electric Single...

Not finding what you are looking for?
Jade RJDW2470A Free-standing Dishwasher Logo

Related Topics:

1,133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jade Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Jade Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...